similar to: question about major:minor numbers

Hi, i tried to insmod the imq.o module from http://pupa.da.ru/imq after a successful compile, but it thows this error: > insmod imq.o imq.o: unresolved symbol nf_unregister_hook imq.o: unresolved symbol nf_register_hook I think I have some kernel options disabled, does anyone know which one(s)? Thanks cord _______________________________________________ LARTC mailing list /

now, i''m learning and try to read a lot of article about tc command in linux for setting traffic shaper. but i''m doubt about In the theory about tc command ... In general, we define class under root qdisc but Is it can be possible ???? If we define another qdisc under root qdisc, Can i do it? because i have just read tc command syntax and i found this point ... syntax: tc qdisc

Help me  ... I try use the tc filter, but seems he doesn''t work, I already reconfigured my kernel ( 2.4.32 ) with all options related a QOS enabled ( like modules ) and nothing happens. I get the tc tool from HTB source package, well  this is my set : eth0 is my internal NIC. tc qdisc add dev eth0 root handle 1: htb default 12 tc class add dev eth0 parent 1: classid 1:1 htb rate

Help me  ... I try use the tc filter, but seems he doesn''t work, I already reconfigured my kernel ( 2.4.32 ) with all options related a QOS enabled ( like modules ) and nothing happens. I get the tc tool from HTB source package, well  this is my set : eth0 is my internal NIC. tc qdisc add dev eth0 root handle 1: htb default 12 tc class add dev eth0 parent 1: classid 1:1 htb rate

HTB and imq was used to control traffic. AC="tc class add dev eth0 parent" $AC 1: classid 1:1 htb rate 100kbps burst 2k $AC 1:2 classid 1:10 htb rate 50kbps ceil 100kbps burst 2k prio 1 $AC 1:2 classid 1:11 htb rate 50kbps ceil 100kbps burst 2k prio 2 $AC 1:2 classid 1:12 htb rate 50kbps ceil 100kbps burst 2k please tell me if i do not set prio, what is the default prio? low delay class

Hi, I am new to HTB and in the learning process I want to simulate a slower link on my server to see how qdisc works. I have a 100Mbit connection. I want to simulate a 100K connection and to divide traffic between FTP and SMB. (like in HTB user guide). The problem is that it doesn’t work. I can transfer files with FTP of SAMBA at the wire speed. (Just like when there was no HTB and qdisc).

With the below script, whenever I ping 10.0.16.10 (which matches the only filter I have), traffic still get''s sent to the default 1:2 class instead of 1:1 and I don''t know why... Any hints? (kernel 2.6.12, iproute2-2.6.15) tc qdisc del dev eth0 root > /dev/null 2>&1 tc qdisc add dev eth0 handle 1: root htb default 2 tc class add dev eth0 classid 1:1 parent 1: htb rate

HTB and imq was used to control traffic. AC="tc class add dev eth0 parent" $AC 1: classid 1:1 htb rate 100kbps burst 2k $AC 1:2 classid 1:10 htb rate 50kbps ceil 100kbps burst 2k prio 1 $AC 1:2 classid 1:11 htb rate 50kbps ceil 100kbps burst 2k prio 1 please tell me the range of "prio" _________________________________________________________ Do You Yahoo!? 新鲜到底,娱乐到家 -

Hi, the script below should allow to get ssh connections running well while downloading, but even the 100kbps (100kbyte/s?) doesnt work - can still download with 500+kb/s. Whats wrong? INTERFACE=eth0 #clear all on $INTERFACE tc qdisc del dev $INTERFACE root tc qdisc add dev $INTERFACE root handle 1:0 htb default 15 #root qdics, allows borrowing for its children tc class add dev

Hi all, I''m new to using iproute2 for traffic shaping but not new to Linux. Essentially I have a WAN between two cities that I stream audio over for rebroadcast. Since it''s all done live stability and prioritization is critical in staying on air for our radio broadcasts. My WAN is 1.5Mbit PVC within my provider''s infrastructure so I have an unencrypted direct

tc qdisc add dev eth0 root handle 1: htb default 12 tc class add dev eth0 parent 1: classid 1:10 rate 30kbps ceil 100kbps burst 2k tc class add dev eth0 parent 1: classid 1:11 rate 10kbps ceil 100kbps burst 2k tc class add dev eth0 parent 1: classid 1:12 rate 60kbps ceil 100kbps burst 2k tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src 172.16.11.2 flowid 1:10 i login

Good afternoon, I am a newbie to lartc. I have read the HOWTO. I set up a CBQ traffic control using the following commands, and it caused my VNC connection to break frequently. ======================================================================= **CBQ: cbq-1280.My_shaper /sbin/tc qdisc del dev lo root /sbin/tc qdisc add dev lo root handle 1 cbq bandwidth 20Mbps avpkt 1000 cell 8 /sbin/tc

Hi, I wanna do some shaping on a DSL line that is plugged to the eth1 nic. Should I attach the qdiscs directly to the ppp device or can I use the eth1 device instead? What (and why) makes more sense? thx cb _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi all! I''m trying to shape traffic in a dorm''s network (4 mbit symmetrical internet link, about 200 computers, heavy p2p usage). The router is a p4xeon running linux 2.6.9 with the qnet patches (http://kem.p.lodz.pl/~peter/qnet/). When I activate ip_forward I get >20% packet loss and a lot of duplicates. Any ideas? I attach my shaping script. Thank you very much in advance,

Hi,lartc I used iproute-060110 with iptables1.3.4 on gentoo 2005r1 kernel 2.6.14-5. I find some error messages in system logfile: HTB: quantum of class 10001 is big. Consider r2q change. HTB: quantum of class 10010 is big. Consider r2q change. tcf_action_init_1: successfull police HTB: quantum of class 20001 is big. Consider r2q change. HTB: quantum of class 20020 is big. Consider

Hello, I''ve just recently started to use IMQ and I got puzzled after seeing the imq usage example on the linuximq.net site: It was something like this: tc qdisc add dev imq0 handle 1: root htb default 1 tc class add dev imq0 parent 1: classid 1:1 htb rate 1mbit tc qdisc add dev imq0 parent 1:1 handle 10: htb default 5 tc class add dev imq0 parent 10: classid 10:1 htb rate 256kbit

Hi list, I''m playing with tc and found a strange behavior when I try to delete filters. For example, this simple scenario: tc qdisc add dev eth1 root handle 1: htb default 100 tc class add dev eth1 parent 1: classid 1:1 htb rate 128Kbit tc class add dev eth1 parent 1: classid 1:2 htb rate 258Kbit tc class add dev eth1 parent 1: classid 1:100 htb rate 32Kbit tc filter add dev eth1 parent

I`m trying to shape both upload (eth0) and download(eth1). I made this script to acomplishthis but the filters are not working even though the classes and qdiscs are created. What am I doing wrong? #!/bin/bash tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1 htb default 10 r2q 5 tc qdisc del dev eth1 root tc qdisc add dev eth1 root handle 1 htb default 10 r2q 5 tc class add dev

Dear list, I have the problem that child classes don''t seem to issue the parent class to borrow from their parent. This is a simplified version of my script: tc qdisc del dev $DEV root tc qdisc add dev $DEV root handle 1: htb default 10 tc class add dev $DEV parent 1: classid 1:1 htb rate 10mbit tc class add dev $DEV parent 1:1 classid 1:10 htb rate 1kbit ceil 512kbit #groups tc

Hello, its me again, I won''t stop sending emails to this list, until I solve this problem, I''ve tried several apps to create the right htb rules (even made them my self), but I always get the same results, traffic gets shaped, but I can''t use my bandwidth, and this is weird, because I should be able to, also I keep seeing download being limited too, and that