similar to: HTB rates aren''t enforced correctly

Hi all, I''m experimenting with HTB and the prio parameter and it does not give me results I expect. I''ve created 4 HTB classes: 1:10 TCP ACKs (prio 0) 1:20 TCP traffic on dst port 10001 (prio 1) 1:30 TCP traffic on dst port 10000 (prio 2) 1:40 Default (prio 3) ceil and rate parameters are the same for all 4 classes (rate is

Hi Stef, Sorry to write to you directly but my list membership is not working, I receive the archive but cant send to the list, cant delete myself because I don''t exist and can''t rejoin as they say I do exist, anyway hope you don''t mind Can you tell me what the difference between these two scripts is please. What I want to achieve is a high speed channel 1000kbit from

Hi I have setup iproute2 and need a bit of help reading the stats from it ===== output qdisc htb 1: r2q 10 default 20 direct_packets_stat 0 ver 3.17 Sent 547326809 bytes 1342627 pkts (dropped 9303, overlimits 2817572 requeues 0) backlog 46p qdisc sfq 10: limit 128p quantum 1514b flows 128/1024 perturb 10sec Sent 41874343 bytes 730889 pkts (dropped 0, overlimits 0 requeues 0) qdisc sfq

I''ve set up Traffic Shaping on a Linux Router. Using HTB with SFQ, i''m trying to slow down heavy downloading for 20 subscribers over a 2048 kbit downlink. I''m classifying internet related traffic using iptables marking. bri0 is my local lan bridge, receiving egress traffic destined for subscribers. tc qdisc add dev bri0 root handle 1: htb default 2 tc class add dev

Hello everyone, First of all, sorry for my poor english. I''ve been working with this for a few weeks and I''m getting sick... I''m trying to control the bandwith in my network using the following script. The machine where the script is running makes NAT, eth0 is connected to the router and eth1 is connected to the Lan. When I run the script it doesn''t appear any

Hi, I have some interesting problem with htb , I set up root class and sub-classess: $TC qdisc add dev eth0 root handle 1: htb $TC class add dev eth0 parent 1: classid 1:1 htb rate 1990kbit ceil 2000kbit $TC class add dev eth0 parent 1:1 classid 1:10 htb rate 190kbit ceil 200kbit $TC class add dev eth0 parent 1:1 classid 1:11 htb rate 1400kbit ceil 1600kbit $TC class add dev eth0 parent 1:1

----- Original Message ----- From: Michał Joachimiak To: lartc@mailman.ds9a.nl Sent: Tuesday, July 20, 2004 3:45 PM Subject: HTB - Really Big problem Hello everybody! Since week i dig lists and www and can''t find solution for my problem. I''m using HTB 3.13 kernel 2-4-25 smp iptables 1.2.9. I''ve got situation like this: LAN------Linux Box(routing only)------- Linux

Hello What I''m looking for is how to configure the Linux QoS module to do global rate limitation for two (or more) 802.1q pseudo network devices. I naturally suppose there is a possibility with IFB. I don''t want to use IMQ because it''s not integrated to my kernel v2.6.21.1 and I didn''t find IMQ patches for it nor for the iptables package I use (v1.3.7).

I am using the script below to simulate a very low bandwidth connection. I found that I could turn the bandwidth knob down to about 4kbit, but below that I didn''t get any traffic through. I''ve had a look at this generally, but couldn''t find an answer. It doesn''t even seem like the first reply packet gets through. I have tried it with much bigger buffers,

Dear all, I am facing problem in restricting upload traffic on fake ip address 10.0.0.0/8 network. I can easily restrict upload traffic on my real ip address. eth0 --wan port connected to internet eth1 --lan port connect to local network my script on eth1 is working properly bcoz it is for downlink traffic this is the script which is having problem.

Hi guys I have a config as follows for one of my networks. I want to give the xxx.xxx.xxx.xxx/xx network 64kbit for everything from the internet but 8000kbit from our internal servers on yyy.yyy.yyy.yyy/yy network. It does not work. I only want to use u32 filters. I think what's happening is the first flowid of 1:21 is catching them and not getting to the 1:40 flowid. Is this right? The box

I''m streaming audio over a WAN that is 1.5Mbit/s. The audio has to go both ways and can be over tcp or udp. The manufacturers recommend udp as it has less overhead but has a higher chance of dropping out. The audio requires 130-200kbit/s in each direction for a combined 260-400kbit/s. I have two transparent bridges on either side of the WAN to do traffic control. I split it so

Hi, this is my Linux Box ---------------------------- LAN 1 -----|--eth1 <---br1--->eth0.1 | | \ | | eth0--|----- 802.1q tagged 1 Mbps link | / | LAN 2 -----|--eth2 <---br2--->eth0.2 | ---------------------------- I have to bridge the 2 lans

Hi, I am trying to use htb to limit bandwidth on loopback for traffic through particular port. Here is the script I am using. tc qdisc add dev lo root handle 1: htb tc class add dev lo parent 1: classid 1:1 htb rate 100kbit ceil 100kbit tc class add dev lo parent 1:1 classid 1:10 htb rate 50kbit ceil 50kbit tc class add dev lo parent 1:1 classid 1:11 htb rate 50kbit ceil 50kbit tc filter add

Hello, I have begun to use the tc scripts since 2 weeks ago, so I am beginner. I am trying to divide my bandwidth in 4 independent ones. Each of these sub-bandwidths is assigned to 4 different groups of ip. Bandwidth sharing is allowed. I put a Linux with two Ethernet card between the router and the LAN. Eth1 is the card connected to the router and eth0 is the one connected to the LAN. My ISP

Hi, good people! I wanted to limit my 4 customers to 144, 16, 32, and 32kbps. I used the following tc commands BUT IT FAILED TO LIMIT each and everyone of them to its bandwidth. What am I doing wrong: My tc scripts are: tc qdisc add dev eth1 root handle 1: htb default 1 #Classes# tc class add dev eth1 parent 1: classid 1:1 htb rate 9bps ceil 9bps #Default

Hello, I have a serious problem with HTB which I wasn''t able to solve myself. I run a masquerading router with ppp0 as interface to the Internet. Three clients need to share a downstream of 1 MBit, which I want to divide with tc. When I see a packet being forwarded to one of these clients, I give it the appropriate unique mark: iptables -t mangle -A FORWARD -d 192.168.34.141 -j MARK

Hello. I''m running linux box with Slackware 9.1 and compiled kernel 2.4.31 with "yes" to VLANs and "yes" to all QoS. On this box i have more ethernet interfaces: eth0 eth1 eth2 and so as more vlan interfaces: eth0.100 eth1.3 eth1.4 This is entrace(uplink) router to our whole network and my goal is to shape users on this machine. I want for this purpose use HTB so

I''m a new comer. I have problems using tc+htb. I run the following commands, and expect outgoing ssh flow goes into 1:11. But actually it goes into default 12. What''s wrong? tc qdisc add dev eth0 root handle 1: htb default 12 tc class add dev eth0 parent 1: classid 1:1 htb rate 1000kbit ceil 2000kbit prio 1 tc class add dev eth0 parent 1:1 classid 1:11 htb rate 100kbit ceil

Hello list. I''ve configured a very simple script to slow down packets coming from a particular IP Address. I''ve used IPTABLES to mark traffic coming from this IP Address, but it does not appear to be working as expected. Let me first describe my system as maybe what I''m doing is beyond what NETFILTER can do. I have one machine that runs all my servers as