similar to: Multicast Routing

Hi, I''m trying to do some horrible private address routing between networks. Is there a way to handle the following? I''m guessing policy routing *might* be the way, but anyway... Two networks, accessible via public addresses -- a /29 on each. Each network, however, has more machines than this, so one also has 192.168.0.0/24 and the other has 192.168.1.0/24. I have an IPIP

I am trying to get multicast traffic to traverse 3 different subnets call connected to the same linux router. This is primarily to get rendezvous/zeroconf services working for Macs on the network. Being able to experiment with the VideoLAN client''s multicasting abilities would be a bonus. I see that rendezvous sends out packets with a TTL of 1 and expects them back with a TTL of 255 so

Hello. I''m new to this list. I''m trying to set up multicast routing between two networks: Internet ^ | Windows box | | UserModeLinux A <-----> Colinux Router <-----> UserModeLinux B

Anybody can answer my question regarding multicast routing. i have read Linux 2.4 Advanced Routing HOWTO and i have some question about multicast routing. I have two network to route between. Can you give me some tips to configure the routing table. I have two LAN connecting each other through Linux Box. Box A eth0 : internet Add eth1 : local subnet (192.168.0.0) Box B eth0 : 192.168.0.15 eth1

Hi all, We want linux (ubuntu) with 2.6 kernel to act as multicast router and to pass multicast packets between different subnets. And linux machine as router has two network cards having two different subnets assigned onto. We first worked "sysctl -w net.ipv4.ip_forward=1" line on linux shell that made linux to work as unicast router. (like host, the multicast packets were discarded at

Hi, I have problem with multicast routing on my network. I tried mrouted and also pimd, but always same problem. When I set mrouted or pimd on one router, everything works fine, but when I start mrouted/pimd on another one, routing die. In moment when I start anorher mrouted/pimd /proc/net/ip_mr_cache is cleaned. My topology: gateway (no mrouted/pimd)

Hello list, Not sure if I am asking the question in the correct list. I am a newbie trying to get multicast routing to work on my linux 2.4 kernel. I am using usc pimd code. I have pimd which sets up the route in the kernel [ /tmp]# ip mroute show (22.22.22.1, 224.0.1.20) Iif: eth2 Oifs: eth1 [ /tmp]# I can see data packets arriving on eth2 [/tmp]# tethereal -i eth2 Capturing

well, once i figured out what to do it was easy. 1) install freebsd over linux. 2) recompile kernel with: option MROUTING 3) start mrouted 4) go get yourself a cold beer. you deserve it! thanks! -bob CONFIDENTIALITY NOTICE: The information in this electronic mail transmission contains confidential information intended only for the use of the individual or entity named above. If the

Hi, I''m investigating getting iTunes sharing to work within a VPN. Does anybody know where I could find some documentation on forwarding mDNS packets between two subnets connected by two Linux routers? The LARTC guide just stops mid chapter. Thanks, James. The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access

Hello, I have a little strange config. I will try to explain it as short as possible. I have ethernet switch, which is Port Based VLAN enabled. For example: this switch have 3 ports. Port 1 is VLAN 1 only. Port 2 is VLAN 2 only. Port 3 is VLAN 1 and 2. This means that if packet come from Port 1 it will be sent ONLY to port 3. If packet come from Port 2 it again will be sent to Port 3 only.

* sorry for the 2 previous schemas, they came out a mess. I hope this one is understandable. hi: I have this 2 boxes set up like this: 2020::2/128 2020::254/128 3030::254/128 192.168.0.2/24 192.168.0.254/24 192.168.30.254/24 +-------+ eth0 eth3 +-------+ | |==================== | | eth1 | A | | B | ---- | |

Hi, I''m trying to route multicast between 2 LANs using a GRE tunnel. The setup is: B to C is a GRE tunnel running over PPPoE. B is the multicast router. A is on the same LAN as B. The same ethernet adapter is used for both the LAN and PPPoE connections. I''ve setup smcroute since I only need static routing. Multicasts sent from C (the remote machine) to B over the

Hi list, I try to install the following network: /-----------------\ | Firewall 1 | \-----------------/ ___________________| |_________________ | 10.2.6.1 10.2.2.1 | | eth1 | | 10.2.6.11

Hi, I need a help on Linux routing, if you have some sparse time. I''m based in Madagascar and my English is not good; so please forgive me. *What I want to come-up with: *My main goal is to download using two modems at the same time, and combining their bandwidth, but I have failed miserably. The reason is this: our country is still using poor slow internets, and I have seen on the

hi: *I have this 2 boxes set up like this:* 2020::2/128 2020::254/128 3030::254/128 192.168.0.2/24 192.168.0.254/24 192.168.30.254/24 +-------+ eth0 eth3 +-------+ | |=======================| | eth1 | A | | B |---- | | | |

Hi, I have been reading: http://lartc.org/howto/lartc.multicast.html in effort to understand how to route multicast traffic and just joined the group. History: I am trying to multicast mpeg (using the videolan server) on a private network. The server side of the network is copper gigabit, which connects to one of those cheap fast Ethernet switches with a single gigabit uplink. The problem

* sorry for the other schema, it came out a mess. I hope this one is understandable. hi: I have this 2 boxes set up like this: 2020::2/128 2020::254/128 3030::254/128 192.168.0.2/24 192.168.0.254/24 192.168.30.254/24 +-------+ eth0 eth3 +-------+

How do the Multicast routers sniff IGMP/MLD messages from the network? I checked the XORP, pimd etc. Most of them just open a RAW socket with protocol set to IPPROTO_IGMP. But using this the router gets the packets addressed to 224.0.0.1 only. How does it receive IGMPv2 and IGMPv3 membership reports sent by other hosts? Thanks, Sachin

Is there a multicast routing daemon included in CentOS or EPEL? (Seems like a weird question to even have to ask, but I can't seem to find one.) Thanks! -- ======================================================================== Ian Pilcher arequipeno at gmail.com Sent from the cloud -- where it's already tomorrow

After upgrading our router from redhat 7.3 (linux 2.4.18 ) to mandrake 10.0 (linux 2.6.3) some of our routing scripts failed. This configuration worked properly before we changed distributions. X.X.X.2 is supposed to recieve traffic for X.X.X.6 and nat that to Z.Z.Z.46 ip addr list |grep ''eth[0123]'' 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen