similar to: HTB Web server lag

Hey, I have such a script: tc qdisc add dev $DEV root handle 1:0 htb default 21 r2q 2 tc class add dev $DEV parent 1:0 classid 1:11 htb rate 100mbit tc class add dev $DEV parent 1:11 classid 1:21 htb rate 512kbit ceil 512kbit tc class add dev $DEV parent 1:11 classid 1:23 htb rate 1024kbit ceil 1024kbit tc class add dev $DEV parent 1:11 classid 1:25 htb rate 3072kbit

Hey, everyone, I am kindda newbie to this subject, so I just post my problem directly, please let me know if anything is wrong. in my config file when I use tc class add dev eth1 parent 1:11 classid 1:11016 htb rate 512kbit burst 10k everything works correctly but...when classid goes larger than 1:19999, eg: tc class add dev eth1 parent 1:21 classid 1:21006 htb rate

Hello... Im trying to setup HTB to allow me to shape traffic from two upstreams that meets on single lan0 interface. I prefer to use HTB qdisc within HTB root qdisc for cleaner rules design. Seems that it doesnt work at all. tc -s class show doesnt show any traffic on other classes attached to HTB qdisc. Linux 2.6.20.7 iproute-2.6.20-070313 Weird thing is that tc -s class show that 1: and 2:

One of our servers running Dovecot 1.0.beta3 and dovecot-lda has failed to deliver a few messages and I can't figure out why. Very few messages bounce and I don't see any common thread between them other than time. The 15:19:11 message was a company wide announcement and the other 4 servers (identical configuration) were able to deliver it. Feb 26 20:24:46 rental deliver:

Hi All; If I need to set the opermode to King Saudi Arabia, what the name I have to use? For example, to set it for kuwait then I use opermode=KUWAIT. So what will be for Saudi Arabia? Any advise? Regards Bilal

(excuse me for my bad english) I CAN?T CHANGE WRITABLE/READ-ONLY VALUE BECAUSE I NEED THAT ANYONE WRITE EXCEPT THE USER/GROUP IN WRITELIST I used the samba-3.0.1pre1 without problems. Now, I use the samba-3.0.4 (bug ms04-011 fixed) Is this a samba 3.0.4 bug ?! : [rental] comment = Rental path = /home/rental valid users = @administradores @rental mesaayuda ctoledo public = no

Hello List, I use HTB in a ~80 users serving router with kernel 2.4.20. eth0 is the internet interface (half-duplex 1Mbit), eth1 the internal interface (100Mbit full duplex) cause of the fact that the router also serves as a http-proxy (squid) i thought setting up the default class on eth1 with the real upload-speed (100Mbit) would do the job, i.e. shaping normal stuff to 1Mbit except local

Hello all, I am with a doubt about QoS solution... I have a 4 Mbit backbone coming from the telco I use... This is the link I serve to my clients, so I make this classes: $TC qdisc add dev $DL root handle 1: htb default 60 CLASS="/sbin/tc class add dev $DL parent" $CLASS 1: classid 1:1 htb rate 4096Kbit $CLASS 1:1 classid 1:10 htb rate 256Kbit ceil 3072Kbit burst 15k $CLASS 1:1

Hi All, I''m trying to create a contended section of bandwidth using IMQ. I have the imq0 device up and running, with traffic passing through it. Firstly, I need to throttle the entire device imq0 to 2mbit/s. I would then like to add throttle rules for individual IP addresses, allowing them to pass up to 512kbit/s each, as long as imq0 has not reached its 2mbit/s. The configuration

Hi I have tested with FC3 but iam not able get any good results on that. in the list some one recomend me that > 3.17 HTB should work I saw latest FC4 test2 has the HTB 3.17 with iptables 1.3.0 i have install in my P4 box, and trying to test when iam uploading its working perfect, but when iam downloading its going to default class can some one experinced the same problem below is the my

Hi All, I''ve got an interoffice IPSEC VPN in place that I''m trying to give priority to terminal service (tcp 3389) traffic. I''ve created rules at each end, but have hit a bit of a dillemma. As the data is encrypted I must also give highest priority to protocol 50 otherwise the priority is lost as the packet gets encrypted. When I do this however, I can''t

Hi please sorry of my english, What is my problem. I am very small ISP. I have link 512kBit. I have 10 clients. I want use htb.init and i dont understand this script. I have this : My first 3 client group download and upload 128 kBit. My next 4 clients group download and upload full 512kBit. My next 3 clients group download and upload 64kBit. Please can me some help write adjust htb.init script

Hi, I''m trying to configure QOS , but I''m don''t have success. My files: #/etc/shorewall/tcdevices #INTERFACE IN-BANDWITH OUT-BANDWIDTH eth0 256kbit 256kbit eth1 256kbit 256kbit eth2 256kbit 256kbit #/etc/shorewall/tcclasses #INTERFACE MARK RATE CEIL PRIORITY OPTIONS eth1

Hi, I've seen this USB product from Sangoma : http://www.sangoma.com/products_and_solutions/hardware/analog_telephony/usb_fxo.html Is it working ok ? Is it easy to integrate it with Asterisk ? How would you rate your experience with it ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

hi everybody. im trying to set up an QoS config, using layer7 (http://l7-filter.sourceforge.net/) for protocol detection. im suposing 3 clients with this configuration: 3 clients: 1.2.3.1 , 1.2.3.2 , 1.2.3.3 1.2.3.1 has 256kbit bandwidth "guaranteed" clients 1.2.3.2 and 1.2.3.3 has 256kbit bandwith so im marking every packet using layer7 iptables module, classifying them in three

The script is corect ? #!/bin/bash /sbin/iptables -F -t mangle /sbin/iptables -X /sbin/iptables -t mangle -N mark_horiz_src /sbin/iptables -t mangle -N mark_horiz_dst /sbin/iptables -t mangle -A PREROUTING -i eth0 -j mark_horiz_src /sbin/iptables -t mangle -A PREROUTING -i eth1 -j mark_horiz_dst /sbin/iptables -t mangle -A OUTPUT -o eth0 -j mark_horiz_dst /usr/local/bin/mipclasses -s

Hi Guys, I have a little problem i dont understand why its happening, Initially i thought it was a network problem, but then i made a crossover between me and the server and shaped on that interface with as minimal as possible config this my test: $TC qdisc add dev $INTERFACE root handle 1: htb default 30 $TC class add dev $INTERFACE parent 1: classid 1:1 htb rate 10Mbit # POOL1 $TC class add

I downloaded the HTB and ESFQ packages and installled the patched kernel and tools. Now can someone give me an example how to configure my system so that the 512Kbit are fairly divided for each computer ? Assume that eth0 is the interface on the WAN side and eth1 on the LAN side. Thanks _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

Hi dears, I am from saudi arabia and using asterisk 1.6.2.13,Dahdi-2.3.0 and Digium, Inc. Wildcard AEX800 8-port analog card (PCI-Express) . I am facing problem with detecting caller id before first ring.I recorded the dahdi channel using dahdi_monitor command. Where I am able to see and hear caller-id dtmf tones. Pl tell me the procedure to upload recorded file if you needed. Something I want

Hello to everyone, my problem to many of you will be quite simple to others quite hard (like me) I have had no previous experience with webmin of samba so im kinda new to this. My problem is that everytime i access my samba share (on my debian system) on windows and want to either play an mp3 or watch a film or get some college work, Windows Xp pro freezes the hell out of my computer. I am