similar to: hashing

Hi i have 2 class C 80.97.103.0/24 and 81.180.12.0/24 but i dont konw how to set hashing tables for HTB tc add dev eth0 parent 1: prio 0 handle 1: protocol ip u32 divisor 256 tc add dev eth0 parent 1: prio 0 protocol ip u32 match src 80.97.103.0/24 hashkey mask 0x000000FF at 12 link 1: but i want 2 hashkey for 80.97.103.0/24 and for 81.180.12.0/24 can somebody help me ? this is a part fo my

I forgot to ask a few more. Is there a relation between the hashtable ID /(parent,handle) so that if I used 2: for a hash table I could or couldn''t use 2: for a (parent,handle)ID? I also noticed that you type the hashtables like 2:2: can you have more levels with this? like 2:2:2:1: ? and I guess the same question with the parent/handles. thanks again. -- When dealing with a slow

Hi all, I am a newbie and I have not played a lot with tc utility. I have red maybe everything that has to do with massive filtering (maybe not everything). If you can help me on this I would appriciate that very much. I use tc utility with iproute2-ss040831. I want to limit bandwidth for the 192.168.0.0/16 subnet using this script. tc qdisc del dev eth0 root tc qdisc add dev eth0 root

Hey all, I had asked a question a little while ago about CPU usage being outrageous while using tc and a cbq qdisc. Ed was very kind and offered a few suggestions. One of these was to look at hashing. So after pounding away at it for about a week, I have a general understanding of how it works and have tried to implement it. Unfortunately, and quite obviously since I''m posting here, it

I have a question about a few things: ok when you have parent x:x and handle x:x link x:x flowid and so on. What is the max values of each of these, also where these or some of these hex numbers? I tried this on redhat 7.3 so there may have been some updates, but this is one of the tests I did. [root@RL1 root]# tc filter add dev eth0 protocol ip parent 1:0 prio 10 u32 ht fffe:: match ip dst

Hi I have been playing with tc. I''m using htb and sfq. I tried to setup shaping of every ip address within a /20. I found that there must be an upper limit of about 2096 on the number of rules (classes, qdiscs or filters). I was testing a /20 which gives 4096 classes, qdiscs and filters. I''m using hashkey to optimize processing of frames. When executing the script below - it

Hi I''m doing traffic shaping with tc on ''10.0.0.0/30'' and ''10.0.0.28/30''. I want to delete part of shaping rules on the fly. (see my configuration at the end of this mail) I wan''t to delete the shaping for ''10.0.0.0/30'' on the fly while still keeping the shaping for part ''10.0.0.28/30'' running. When I for

Hey A wise man said to me that Hashing filters was my solution to rock the world, and making my life alot easier. When applying 4000 rules, the system had to check them all for match. But with hassing it would only require 1-2 checks. Even though when i had read the lartc on the subject i was no less that a question mark. If anyone have played with it, and have a working, logic configuration

Hello I have 2 class-B networks (172.22.0.0/16 and 172.23.0.0/16, over 130k of ip''s) and need to setup traffic tbf shapers with 64kb/s for each ip from 172.22.0.0/16 and 128kb/s for each ip from 172.23.0.0/16 just read lartc and don''t understand how to use u32 for decreasing number of rules and hashing

hi I would like to ask is the following config correct for what I want to achieve ... Scenario: I have 3 networks 192.168.12.0/24, 192.168.48.0/24, 192.168.56.0/24 and most of the users use 1 IP, some of them more... If I make flat u32-filter search the box will make aprox/max 3 * 256 = 768 checks for every IP, so i''m deciding to deploy u32 hashes.. Here is the config I think to use

$TC filter add dev imq0 parent 1:0 prio 5 protocol ip u32 $TC filter add dev imq0 parent 1:0 prio 5 handle 2: protocol ip u32 divisor 256 for ((j=0; j<=7; j++)) do for ((i=0; i<=255; i++)) do q=`printf "%x\n" $i` $TC filter add dev imq0 protocol ip parent 1:0 u32 ht 2:$q: match ip src 10.0.$j.$i flowid 1:10 echo "$q 10.0.${j}.$i" done done $TC

Hi, I''ve been working on hashing in tc for a month. Since there are only a limited number of avaialbe example on hashing, I''ll be appreciate if someone can my questions as follows: 1. tc filter add dev eth1 protocol ip perent 1:0 \ prio 5 u32 ht 800:: \ match ip src 1.2.0.0/16 \ hashkey mask 0x000000ff at 12 \ link 2: It seems that the hashkey make can only applied to ip

What is the difference between lines below? $TC filter add dev imq0 parent 1:0 prio 5 handle 1: protocol ip u32 divisor 1 $TC filter add dev imq0 parent 1:0 prio 5 handle 2: protocol ip u32 divisor 256 What divisor is doing? And the last problem... $TC filter add dev imq0 protocol ip parent 1:0 prio 5 u32 ht 800:: match ip src 10.0.0.0/16 hashkey mask 0x000000ff at 12 link 2: Why after ht

I''m hashing on a non-octet boundary, and it doesn''t seem to be working. I''ve got this set of filters, that does work: # root tc filter add dev eth1 \ parent 1: protocol ip prio 2 \ u32 # ht tc filter add dev eth1 \ parent 1: protocol ip prio 2 \ handle 2: \ u32 divisor 256 # flow tc filter replace dev eth1 \

Hi, I am trying to put together a hashing filter based on example provided in LARTC how-to document. I want to link two hashing filters together where first one will use 3rd octet of an IP address as hashkey and second one will use 4th octet as hash key. How do I tell mask the address so that u32 filter uses 3rd octet as hashkey? Venkatesh K _______________________________________________

I''m a new comer. I have problems using tc+htb. I run the following commands, and expect outgoing ssh flow goes into 1:11. But actually it goes into default 12. What''s wrong? tc qdisc add dev eth0 root handle 1: htb default 12 tc class add dev eth0 parent 1: classid 1:1 htb rate 1000kbit ceil 2000kbit prio 1 tc class add dev eth0 parent 1:1 classid 1:11 htb rate 100kbit ceil

Sorry for all the questions I''m just trying to understand how it all works. Thank you for your time. Is the following configuration possible? where ht 800 links to 3: for the 3rd Octet in the IP and then 3: links to 4: for the fourth Octet? tc filter add dev eth0 parent 1:0 prio 10 handle 3: protocol ip u32 divisor 256 tc filter add dev eth0 protocol ip parent 1:0 prio 10 u32 ht 800::

I shape my upstream cable link with HTB from a script. My voip traffic (from the 192.168.0.14 host) gets priority over everything else to the near-starvation of other classes; the rest of the traffic is split up based on some priority rules (qos, empty ack packets, etc). eth1 is the uplink I''ve been using HTB and fw marking for the job until recently, when I changed the queue structure

Hi, I need to set filter-hash and use source-port as hashkey. It seems that I can''t use "hashkey" without using "match". I am using following commands: tc qdisc add ... root handle 1:0 htb # Loop to add 1000 classes (i = 1 to 1000) tc class add ... parent 1:0 classid 1:$i #set filters tc filter add ... protocol ip parent 1:0 u32 tc filter add ...

Is it possible to create 1 filter rule using fw selectors AND u32 selectors? Richard. -- ___________________________________________________________________ Recursion: see recursion +------------------------------------------------------------------+ | Richard Lucassen, Utrecht | | Public key and email address: | |