similar to: 4 lan''s: routing + bridging

Hello, I'd like to clone existing CentOS server. Can anybody recommend any working solution to achieve that ? Regards Przemyslaw Bak (przemol) -- http://przemol.blogspot.com/ ---------------------------------------------------------------------- Wygraj nawigacje GPS! 14 sztuk czeka. Sprawdz >> http://link.interia.pl/f22f3

Hello, we are using hardware array and its vendor recommends the following setting in /etc/system: set sd:sd_max_throttle = <value> or set ssd:ssd_max_throttle = <value> Is it possible to monitor *somehow* whether the variable becomes sort of bottleneck ? Or how its value influences io traffic ? Regards przemol

Hello, one of our developers is developing his Web applications (PHP-based+MySql) on 64-bit Fedora. He would like to use the same, 64-bit environment on CentOS. I am not against 64-bits (we use it for many, many years using Solaris) but what concerns me is the stability of 64-bit Linux. Can you share your experience regarding stability of 32-bit and 64-bit CentOS ? Does anybody use 64-bit CentOS

Hello, I am trying to migrate one of our fedora-based servers to CentOS. Our PHP developers doesn't allow us to switch because there are no crucial (for them) php packages: php-smarty php-adodb php-accelerator It is not acceptable for us to download sources and compile them and repeat the process each time there is a security bug. Can you recommend any repository which will deliver all the

Hello, we are using several centos servers under Vmware. We are having more and more requests for server space for each business application (let assume that these business requests are for different type of services: databases, web apps, application servers etc. I wonder which solution is better: 1. new CentOS under vmware (having several CentOS servers under Vmware) or 2. new CentOS under KVM

Hello, we have installed non-repository based software on our centos servers (e.g. vmware tools). Each time we do 'yum update' we have to run several scripts to check if these software works after update. Sometimes we forget ... It it possible to configure any sort of triggers which will run automatically after 'yum update' ? I'd like to avoid writing shell wrappers for yum

Hello, we have several physical servers (CentOS 5.*) with rather critical applications where (because of stability) we don't do regularly 'yum update'. In virtualized environemnts (under Vmware) we do a snapshot, then 'yum update', reboot and if something is wrong we rollback the snapshot. On physical servers we cannot do that. I have read about rollback option of rpm but not

Hello, I am experiencing what may be a unique problem with operating the bridge. My hardware is custom Freescale MPC875 processor based with one ethernet (eth0) and one hdlc (hdlc0) WAN port and I am connecting two of these boards together using the WAN ports over a long distance - essentially two bridges in series. They are running Linux 2.6.15 with bridging enabled in the kernel

Hi all, I want to create a bridge (see picture below) between 2 LANs with the same IP range (192.168.0.0/24) using 2 wireless links that use load sharing over multiple interfaces (as descibed here: http://lartc.org/howto/lartc.loadshare.html) for load balancing and fault tolerance. Both links should use IPsec for encryption. I have googled for an example that does this but I could not find it.

On Tue, 22 Feb 2011 11:15:39 +0100 "PIOTREK H." <komarekmz@tlen.pl> wrote: > Welcome > > I have a problem with the new iproute "iproute2-2.6.37.tar.bz2 07-Jan-2011 9:18 (the problem from version 2010 to 2011). > Three problems: > a) with filters for UDP traffic > problem affects only the queuing traffic to the machine on which you work qos > In the case

Hello all, Does anyone know of a methodology to build a route based on the inbound and outbound interfaces as opposed to ip addresses? We are essentially trying to forward packets from one interface to another without looking at the ip address. Bridging (brctl, br2684ctl) will not work in this case as the interfaces use different layer 2 encapsulation (e.g., atm0<=>eth0, or

Hi Fellows: Im trying to bridge 2 remote lans over an ip network are there any ideas instead of vtun? regards __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - File online, calculators, forms, and more http://tax.yahoo.com _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc

Hi all, I'm trying to do the following (ASCII art diagram viewable in fixed-width font at end of message): Take 2 private LANs, seperated by the internet, and bridge them by creating a bridge from 2 ethernet devices and a ppp interface tunneled over ssh between the two linux boxes concerned. The setup on each of the two networks is nearly identical, and is as follows: The network has

Hello guys, I am still in doubt about this kind of server. So my question is about the "prio" at routing tables like: I have 3 tables in /etc/iproute2/rt_tables: 201 201 202 202 222 222 In table 201 there is the rules about my internet link (frame relay) that comes into eth0. So I made this route into it: [root@ns2 iproute2]# ip route show table 201 default via

In its current configuration one of our Linux boxes has 2 DSL modems that connect to the same service provider. On the router packets coming in from the network destined for the internet are marked alternating using nth match those packets are supposed to be picked up by iproute2 and routed out the physical connections based on that mark, thereby doubling the outbound bandwidth. The problem is

You need a combination of iptables and iproute2 to do what you want = because routing is based on it's DESTINATION address and you need to route on = your SOURCE address so it uses a different route depending on which source = IP is in the packet.. Refer to this page which is sort of what you want BUT not exact. It'll = give you some ideas...

I recently upgraded my gateway to a pIII 600 with a zyxel 4 port nic (tulip) and bridge eth0 and eth1, eth0 is a crossover cable to my PC eth1 a switch. I don''t have ifconfig on this box (LFS) and couldn''t find any examples of bridging using ip - maybe this is relevant maybe not - I''ve tried a few combinations of different orders of setting things up. Is there a magic

Hello, I have tested a simple thing in two version of Linux and there was a problem when I have used fwmark as a selector for rule lookups. As you can see below on the Slack, the <test> table doesn''t have any label about fwmark. Is there an iproute problem? -------------------------------------- # cat /etc/fedora-release Fedora Core release 2 (Tettnang) # uname -r 2.6.5-1.358 #

Hi all, I remember at OSCON 2005 there was talk of adding DTrace probes to PHP (in fact, I have a photo of Bryan and Wes working on it!). Did they ever get into the upstream branch, ''cause I don''t recall seeing a --enable-dtrace (or similar) configuration option when I recently built PHP 5.2.1. If not, is there an ETA? TIA, -- Rich Teer, SCSA, SCNA, SCSECA, OpenSolaris CAB

Hi William. Thanks a lot for your help. Im having some trouble recompiling my kernel after a installed the patch. Im running RH 7.3 with kernel 2.4.18-3. The patch I installed is routes-2.4.16-6.diff. I got no errors installing it. I added the multipath support, and recompiled it. The make dep and the make bzImage went fine. I got error during the make modules. These are the errors: