similar to: Re: Diffserv on Linux 2.4.21 (DSMARK problem)

Hi guys, I am working on implementing Diffserv on linux project. I am using suse 8.0 professional kernel 2.4.21. I have the following RPM:iproute2-2.4.7-697.rpm This supports a number of linux qdisc like cbq, htb among many others but it has no support for DSMARK, which I wish to use. Does anyone know of any patch that I could used or any other solution so that use of dsmark is possible. Traffic

hi, I''m a beginner with qdiscs and other lartc stuff. After reading the howto and other related documents (i.e. some papers about linux and diffserv), I decided to start with some test. I found some example script to implement simple diffserv using dsmark, but, just after the first command: tc qdisc add dev eth1 handle 1:0 root dsmark indices 64 set_tc_index the system answered:

I have a Gentoo Linux (kernel 2.6.11) server. Several months ago, I made a traffic shaping setup for my box (running a 2.4 kernel then) that worked beautifully. It gave high priority to SSH and RealAudio traffic, and put HTTP downloading traffic on a lower prio so they could only use what bandwidth was left. However, I''ve only just realized that tc is no longer accepting the commands I

Hi, I want to use the dsmark, but it always says: "unkown qdisc", although I have enabled it (y in Network options), and I have my kernel recompiled. I am using SuSE 8.1, 2.4.20 Kernel, tc available at the HTB site (with already precompiled HTB queue). Can anybody find the problem? thx _________________________________________________________________ MSN 8 helps eliminate e-mail

All: I am tasked with creating an environment in which DiffServ and IP precedence is handled as close to RFC specification as possible. I have a few problems with implementing this based on current queueing structure. Here are a few of my questions. 1.) Is there any way to get DiffServ AF drop levels without using DSMARK and GRED? Ex. AF11 Gred DP 1 AF12 Gred DP 2 AF13 Gred DP 3 2.)

Hi fellow traffic-shapers, I am implementing a Diffserv CORE router using Linux kernel 2.4.18. I used this excellent website (http://www.opalsoft.net/qos/DS-38.htm) using AFHTB as a starting basis for my EGRESS diffserv implementation - and all works great so far!!! But my project has an additional requirement. There are services running locally on the router which are sending/receiving IP

hi, i am currently working on a project on "design of diffserv testbed in linux". i am using tc utility of iproute2 for it. The qdisc dsmark used for marking the DS codepoint at the first hop router makes number of classes depending on the indices given in the command. But i am not clear how at the first hop router does scheduling takes place. what i mean is if i have two flows, whose

I ''m having a problem identical to one encountered on this list awhile back: >I''m trying to configure dsmark qdisc on 2.6.11.4 user mode linux and >tc from iproute2-2.6.11-050314. > > >I think I have some mismatch in my setup since adding dsmark qdisc >fails *unless* I specify "set_tc_index" argument which I believe should >be optional:

Hi all, I am new-ish to Linux tcng and am struggling to find the resources and know how to implement what I need. What I have is a PC with 2 interfaces and a control program on that PC. In the control program I can specify an IP Flow with source and dest IP address, source and dest port, and a QoS class (1-5 which can be mapped to a DiffServ class) - in the control program I want to be able

Im experimenting with using a Linux machine with 3 interfaces to operate as a core router. All links and network interfaces are 100mbit. Below is a ascii diagram of the network. (network A) edge router ------>core router---->edge router (network C) ^ | | edge router (network B) I have tried two

Hi all, Supposedly my router is itself streaming traffic to clients. Is it possible for it to mark its packets before going through dsmark?? I have gone through the examples in iproute2/examples, i noticed that there''s always an ingress and egress of which these are 2 different dev. Is it possible for before ingress and egress be the same dev?? I tried the script below but

Hi folks I have created a script file (dsmark+policing.sh attached) to check graphic an text outputs of simutations, against original examples/dsmark+policing coding (see TCNG Reference Manual-pg.90). It uses tcng coding (*.tcsim file attached) and old tc coding (*.tcsim_old file attached) inserted in tcsim files. Observation 1: The graphic outputs from (*.tc included in *.tcsim) and (*.tc_old

Hi, I want to setup core routers to do both DSCP marking and to get the DSCP and forward packets based on DS field. I don''t want to separate DSCP marking to be done only at the edge routers. I know that dsmark is both used for DSCP marking and for getting the DSCP and forwarding packets according to DSCPs. In my case, since I want to do both of these I need two dsmarks.(?) I am not

Hi stef and all I want measure the policy perfomance for video traffic on mpls diffserv network. there are two different polices for video packet 1. Video packets that are marked that are over the limit are to be rejected at the edge router. 2. Video packets that are marked that are over the limit are to be downgraded as best effort and are sent through. Before video enter my mpls

Hello, This is a question about diffserv on linux. We know, there is a file sch_dsmark in linux source code. Now, i want to add something in the function dsmark_enqueue, for example, i want to add a function which can add a class and queue automately in dsmark_enqueue. That is, not using the command tc. After adding one, it works well, but when add the second one, there is a kernel panic:

Did anyone ever answer this one? THIS is what I am trying to do: >[LARTC] cbq+sfq and DSCP marking >Maria Joana Urbano stmaria@dei.uc.pt >Thu, 13 Feb 2003 19:29:42 +0000 > > * Previous message: [LARTC] Monitoring.... > * Next message: [LARTC] two routes 1 network card > * Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] >

Hi all! Anyone got the same problem? If I: tc qdisc add dev eth0 handle 1:0 root dsmark indices 4 set_tc_index it works fine. If I: tc qdisc add dev eth0 handle 1:0 root dsmark indices 4 it says: RTNETLINK answers: Invalid argument I just don''t need that set_tc_index stuff for marking. Ferenc __________________________________________________ Do You Yahoo!? Tired of spam?

Hy, I would want to mark the packets that are entering in a machine, with a mark for using diffserv with DSMARK. My machine has 2 interfaces, a ethernet and a wireless. The ethernet interface is eth1 and the other is wifi0. Firs, I would want to test that I would be able to mark the tos of the paquets that I would be receiving, for this I write in the console of my linux: iptables -A

I want to set the DSCP field of the incoming packets. And then put them in the correct queues. I can mark the packets: iptables -A OUTPUT -t mangle -d 10.10.10.12 -j MARK --set-mark 1 tc qdisc add dev eth0 handle 1:0 dsmark indices 64 set_tc_index tc class change dev eth0 classid 1:1 dsmark mask 0x3 value 0xb8 tc filter add dev eth0 parent 1:1 protocol ip prio 1 handle 1 fw

Hello! I have some trouble with dsmark qdisc. I''d like to set DSCP value of my outgoing packets and add a rate limit to each one. I learned HTB and dsmark. They work properly, but I can''t combine them like this: tc qdisc add DSMARK handle 1:0 ... tc class modify 1:1 ... tc class modify 2:2 ... ... tc qdsic add parent 1:1 HTB ... tc qdsic add parent 1:2 HTB ... ->