similar to: Ipsec and kernel 2.6.8

hello i am trying to set up ipsec in my network, for now just between two hosts, using to use AH & ESP in tunnel mode to get all of packet encrypted. keys are negotiated with racoon. mayby using tunnel mode in this case can seems strange, but i know what i am doing. after setting up everything i have done few tests with ping & tcpdump. but the results are very suprising. bellow is what i

hi I''m trying to get ipsec working with x509 certificates however I just can''t seem to. I''ve hit a road block and was wondering if someone could help me figure it out. my racoon.conf (I have it mirrored on the connecting machine. path pre_shared_key "/etc/racoon/psk.txt"; path certificate "/etc/certs"; remote anonymous { exchange_mode

I've just wrote a lenghty email on Fedora ML as reply to Phillip who seems to be in the same trouble as myself... Found that while searching all mailing list archives and bugzillas I could think off (not really successfully, many people with same problems, no answers other than "works for me" -- glad to hear it works for somebody else, but it would be nice if he/she was a bit

Dear list, I''m running Shorewall on a dedicated Fedora 7 box. Shorewall is working well as an office DSL router (dynamic IP) with loc and dmz zones. I am now trying to configure IPSec to connect a VPS, "casp", with a static IP to both the firewall and to the loc network behind it. The host to host SA works fine. However, pings from "loc" to "casp" can be

Hi! I''m testing IPSec tunnels, having the following test schemma: Host A - eth0: 192.168.1.67 eth1: 192.168.10.1 Host B - eth0: 192.168.1.254 eth1: 192.168.20.1 I''ve succesfully configured an IPSec tunnel in order to safely communicate from 192.168.10.0/24 (which is obviously behind Host A), and 192.168.20.0/24 (obviously behind Host B) In this test

Hi all, I am trying to establish a vpn tunnel between one CentOS5 IPSec server and a roadwarrior client, CentOS5 too. Roadwarrior use ipsec-tools version 0.6.5-8 (that comes with CentOS5) and server uses version 0.7 (downloaded from ipsec-tools website). My server configuration is: path include "/etc/racoon"; path certificate "/etc/racoon/certs"; path pre_shared_key

I’ve got a problem that I have ignored for a month or 3 J I’m almost certain this is not a Shorewall problem, but I’ll share it anyway ;) I have 2 ISP connection, with load balancing. here’s some routing stuff: rama-kandra root # ip route show 202.37.230.64/26 dev eth2 proto kernel scope link src 202.37.230.93 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.1

I''ve got a problem that I have ignored for a month or 3 :-) I''m almost certain this is not a Shorewall problem, but I''ll share it anyway ;) I have 2 ISP connection, with load balancing. here''s some routing stuff: rama-kandra root # ip route show 202.37.230.64/26 dev eth2 proto kernel scope link src 202.37.230.93 192.168.1.0/24 dev eth0 proto kernel

Buf ... Solved. Problem was that /etc/pam.d/racoon doesn't exists (I found this tip on NetBSD ipsec pages). Simply I have copied /etc/pam.d/passwd to /etc/pam.d/racoon and now all works as expected. Many thanks for your help Ross. Ross S. W. Walker wrote: > > I think it might just use another one like /etc/pam.d/remote > cause I audited the package and it wasn't there.

Hi, I am new to ipsec and trying to connect my bsd server with win 2000. I have succeeded to tunnel using pre-shared key. But regarding certificate , I failed to get success. The following are configuration : racoon.conf path certificate "/usr/local/openssl/certs" ; # "log" specifies logging level. It is followed by either "notify",

Hi all. The IPSec part of the LARTC howto is great, but I''ve hit a problem in 7.3. IPSEC tunnels. The example given is for manual keying: add 10.0.0.216 10.0.0.11 esp 34501 -m tunnel -E 3des-cbc "123456789012123456789012"; How does one setup "tunnel mode" using racoon? Trying to setup an ipsec tunnel between two subnets: 10.10.42.0/24 and 10.1.1.0/24 using a

I am trying to get a tunnel from a cisco 1760 with IOS 12.2.15.t13 to a freebsd 4.9 install with racoon. I have package version freebsd-20040408a and internal version 20001216 in my log file. I posted the full racoon and cisco log below my configs. Racoon keeps saying: 2004-07-26 16:24:03: DEBUG: isakmp.c:2295:isakmp_printpacket(): begin. 2004-07-26 16:24:03: DEBUG:

Hi Running racoon on a Freebsd-4.11 machine gives a kernel panic. I am using the racoon from ports directory which comes with the freebsd installation. Steps followed are as shown below: racoon -f /usr/local/etc/racoon/raccon.conf setkey -f ipsec.conf ping -c 1 <ip_of_the_other_gw> The ping will lead into a crash. The crash dump looks like for th ping packet it

I have no idea whatsoever as to why racoon/IKE does not work here. I've tried various how-to documents but found nothing that works for me. Gateway (10.0.0.1) running 4.9-stable. Laptop (10.0.0.10) running 5.2.1-release. Both running racoon-20040408a On the gateway 10.0.0.1 # cat /etc/ipsec.conf add 10.0.0.1 10.0.0.10 esp 691 -E rijndael-cbc "1234567890123456" -A hmac-sha1

Hi All, In the previous mail, I have sent is only the problem that occurs, because of using IPv6 addresses. But the connection works with IPv4 addresses without any problem. Thanx, Mohan. __________________________________________________________ How much free photo storage do you get? Store your friends 'n family snaps for FREE with Yahoo! Photos http://in.photos.yahoo.com

Hello, My name is Fermín Galán and I''m currently working with IPSec tunnels. Recently, I was setting a IPSec tunnelling sample scenario (maybe the simplest one :), where I observed some strange behaviour that I like to describe in the list, just in the case somebody knows what can be the cause, please. The scenario involves four hosts configured in the following way:

Hello, I''m trying to put 3 nodes in a vpn in tunnel mode. When I run setkey on the following file, I end up with The result of line 33: File exists. That error isn''t overly helpful, so I was hoping that someone could explain the issue. Here''s the file, with line 33 highlighted. Help appreciated. Mike # Flush the SAD and SPD flush; spdflush; # Add SA for

Hi All, I need to establish an IPSec tunnel between two FreeBSD systems, using IPv6 addresses.The connetcion is host-to-host between two FreeBSD( RELEASE 4.11) systems with KAME IPSec implementation. I tried to establish the connection, but it has some problems which are explained below. |----------------->| host1-[mohan]| |host2-[ram]

Hi All, I need to establish an IPSec tunnel between two FreeBSD systems using IPv6 addresses.The connetcion is host-to-host between two FreeBSD( RELEASE 4.11) systems with KAME IPSec implementation. |----------------->| host1-[mohan]| |host2-[ram] |<-----------------| host1 IPv6 address : fe80::2b0:d0ff:fe6f:dfa0 host2 IPv6 address :

You must define connection address and key in ipsec.secrets. -- Eero 2016-04-01 19:38 GMT+03:00 Glenn Pierce <glennpierce at gmail.com>: > Just trying to follow the instructions here > > https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/Security_Guide/sec-Securing_Virtual_Private_Networks.html > > I don't think I am doing anything special.