similar to: IMQ on 2.6.x + iptraf = problem

Folks, I''m so surprised what happened to my box just in the few weeks lately. Here is my setup: INTERNET <----------> [eth0] SHAPER-BOX [eth1] <----------> USER-FARM both eth0 & eth1 got public ips (202.x.x.x) Why traffic monitored at eth0 is bigger than eth1 ? eth1 shaped just exactly the same as rate i defined in HTB. I just have 1024Kbps from my ISP and i defined the

Hi, i am running imq + htb on my router , the situation is like this eth0 = uplink to my provider eth1 = 1st customer eth2 = 2nd customer eth3 = 3th customer eth0 has limit 512 and i want to share this between eth1 eth2 and eth3 , but not working , this is the script i used, \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ #!/bin/sh

i''m trying to limit upload and download but something is wrong(it is about NAT) i will post here my "script" maybe someone could tell me what is wrong my kernel(2.6.9) is patch with imq(linuximq.net) and my iptables(1.2.11) also #flush tc qdisc del dev eth0 root tc qdisc del dev eth1 root tc qdisc del dev imq0 root tc qdisc del dev imq1 root ifconfig imq0 down

Hello, I''m trying to get my shaper to work, but have only a partial success. Can someone help me with that. My setup unfortunately is not so trivial, but I think some people could have similar one... 1. There is a router connected to the internet line via interface eth0 2. There are users connected to the router via two interfaces : eth1 and wlan0 3. All users are assigned private IP

bridge was configured with "brctl" three NIC was bind to br0 imq and htb was used to control traffic. #modprobe imq numdevs=3 "htb scripts" #iptables -t mangle -A PREROUTING -i br0 -j IMQ --todev 1 #ip link set imq1 up but this can not do the traffic controling. please tell me how can i do _________________________________________________________ Do You Yahoo!? 银行巨头聚会中原

Hello, I wrote a simple traffic shaping script (below) that should have allowed me to shape my internet traffic a bit (ppp0 - adsl 128kbit/64kbit; local interface eth0). The script works only partially - the speed is being limited but too much. Without running this script my download rate is about 10kBytes (with second computer also downloading at about 6kBytes). After running it my download speed

Hi, I have a default class for my un-marked traffic (prio 5) and a prio 0 class for the important stuff, but I do not understand why my download traffic is duplicated in both. It work fine for my upload traffic (same setting except the red class but I have the same result if I create an esfq instead). Any comments/information will be appreciated. Below my config : tc commands from my scirpt :

Hello everyone... I have a little trouble and need some help :P How can I check on which interface the packet is going (eth0, eth1; I have two ISP and on eth3 little LAN), using to check it TC and IMQ? (HTB script) I tried to mark packets, but on chain POSTROUTING this does not work... Maybe because packets fall on IMQ before signing. I tried marking it on FORWARD but packets also

ive got such network: |--------| |-------------| | WORLD |---|ROUTER/server| ------ NATED LAN |--------| |-------------| I want to use imq on ROUTER, what behaviour to choose ? AA, BA, AB, BB ?? --

Sorry to bug the list with this, but I can''t get past it. littlebear ~ # /usr/local/sbin/iptables -A PREROUTING -t mangle -o eth0 -j IMQ --todev 0 iptables v1.3.1-20050701: Unknown arg `--todev'' Try `iptables -h'' or ''iptables --help'' for more information. I''ve tried every combination of patching and recompiling that I can come up with,

Hi. The configuration script is at the bottom. My configuration looks similar to this: imq0 | 1:1 (12mbit) | 1:2 (10mbit) | 3:0 | 3:1 (256kbit) / \ 3:2 3:3 icmp (rest) both 3:2 and 3:3 have rate 1kbit ceil 256kbit Icmp bucklet have priority 1 (better), "rest" bucklet have prio 2 (worse) I tested the script with heavy download

Hello I have a server with a dsl connection on eth1 and local interface eth0. Because of the NAT i cannot direct traffic to IMQ device in PREROUTING chain but have to use INPUT and FORWARD. So i use rules. iptables -t mangle -A INPUT -i eth1 -j IMQ --todev 0 iptables -t mangle -A FORWARD -i eth1 -j IMQ --todev 0 And now the strange thing: FORWARD traffic gets directed nicely to the IMQ, but

Hi! I have read all informations i could find, but some things are still not clear. My setup is: ---INTERNET1(eth0)-\ /- Local net1 (eth2) GW ---INTERNET2(eth1)-/ \- Local net2 (eth3) I have NAT and a working setup using HTB,SFQ, classifying with the iptables -j CLASSIFY way. I shape only the traffic coming from the internet heading to the intranet. I would like

Hi I''ve a stupid question. How can I shape upload using IMQ? Instead of putting a rule in iptables in PREROUTING should i use POSTROUTING? And another question is, can I make routing rule based on ip addresses assigned by iptables to an imq device? The idea is, let''s say i have some rules in iptables like: -t mangle -A PREROUTING -s 192.168.0.0/16 -j IMQ --todev 0 Can i route

Hi folks, I have three network cards on my Slackware box and eth0 and eth1 are for two Internet connections. They have imq0 and imq1. All traffic shaping works fine. Internal eth2 does no traffic shaping. But recently I have put two OpenVPN tunnels (tun devices) and both work via eth0. So my question is - how to shape the traffic on these tun0 and tun1 devices? Thanks Remus

On my debian woody (kernel 2.4.31) the tcpdump doesn''t work with imq0 devices. If I try to tcpdump imq devices there is no packet seen: [...] rt1:~# tcpdump -n -i imq0 Warning: arptype 65535 not supported by libpcap - falling back to cooked socket tcpdump: WARNING: imq0: no IPv4 address assigned tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on

Hey, I have 2 trusted domains to deal with, "DEV" and "TODEV", and I have configured smb.conf like this:- [global] workgroup = MAIN security = ADS realm = MAIN.DOMAIN.LOCAL idmap config *:backend = tdb idmap config *:range = 95000-99999 idmap config MAIN:backend = rid idmap config MAIN:range = 100000-999999 idmap config DEV:backend = rid idmap config DEV:range =

On 2/19/07, Salatiel Filho <salatiel.filho@gmail.com> wrote: > Well , thanks to imq all my client machines are now shaped and > everything is great ... > But now i have a doubt , is there a way to shape the traffic that goes > to the route [doing a wget from the router for example ]? > > > I have a PREROUTING IMQ0 and a POSTROUTING IMQ1 , everything is > working like

hi stef oone more pb while shaping incoming traffic with imq .this one tc qdisc add dev imq0 root handle 1: htb default 20 tc class add dev imq0 parent 1: classid 1:1 htb rate 2mbit burst 15k tc class add dev imq0 parent 1:1 classid 1:10 htb rate 1mbit tc class add dev imq0 parent 1:1 classid 1:20 htb rate 1mbit tc qdisc add dev imq0 parent 1:10 handle 10: pfifo tc qdisc add dev imq0 parent

I want to shape the incoming traffic ( download ) "but using only fwmark", i know there are other methods, but i want to use this one particularly... So, first i create DOWNLOAD and mark with 20 all the traffic with destination 10.0.0.3 ( eth1 ) incoming from my internet device ( eth0 ). #$IPTABLES -t mangle -N DOWNLOAD #$IPTABLES -t mangle -I PREROUTING -i eth0 -j DOWNLOAD