similar to: Load Balance adsl connections: a complete explanation of my case...

First of all i wanna thanks Christoph Simon for the support. Only after his reply to my email i could see the real solution to the problem (Valeu mesmo cara... me ajudou pra caramba! Fico te devendo essa!) :) Here is what i learned in a month of research: I tried A LOT of things to do load balance, including the one at LARTC homepage. The only tutorial that REALLY works in my case is the

I have two adsl lines on my linux firewall box and i want to do some load balance between them...i tried a lot of different things, but it isn´t working...Following the instructions of http://lartc.org/howto/lartc.rpdb.multiple-links.html i used the configuration above. using "iptraf" I can see some few packets using the ppp1 connection, but almost all the packets use ppp0 connection.

Hi Ppl I have 5 adsl lines that after reading quite a bit i managed to get load balanced now abvoiusly it doesnt load balance evenly and this works on what routes are still in the routing cache. my question is my outbound masquerading had to be modified to use snat in iptables instead of just plain masquerading my outbound masquerading now works but my inbound port forwarding doesnt work would

Hi everyone. I have two ADSL connection with the same ISP, ppp0 => 83.32.32.36 <=> 192.168.153.1 ppp1 => 83.32.45.33 <=> 192.168.153.1 and I want to do load balancing wiht the two connections, so I do: #ip route add default scope global nexthop via 192.153..1.1 dev 83.32.32.36 weight 1 nexthop via 192.168.153.1 dev 83.32.45.33 weight 1 #ip route show

Hi folks, i spent my whole day trying to set up my linux router using load balancing with multiple uplinks. I mainly focused on the nano howto, but somewhere I have a big mistake within my head. Basically the load-balancing is working, but not on a per-connection basis - just on a per packet basis. Practically this is not usable of course <g> But as far as I understood it should work..

Hello folks: I am trying to set up a router machine to handle all my network connections to the internet and my local network. I have five interfaces in total, three to ISPs (two adsl and one cable) and two interfaces to my local network one to a switch and one wireless card. I have some of the routing working acceptibly but another portion I cannot get working not matter what I''ve

Hello Shorewall list, I''m a happy Shorewall user since a few years now and everything works fine for me except one thing that I try to implement since a week, the multi-isp. I''ve downloaded the 2.4.0 Stable release yesterday and tried the RC2 since a week. My config is a Debian running a kernel 2.4.27 home made with the CONNMARK.diff patch applied I''m using 2 ISP,

I have a private lan that is connected to the world via 3 dsl lines. I put up a linux box that handles all the dsl lines, lan gateway and all is working well...until...one of the dsl lines goes down. My routing table is: x.x.x.x dev ppp0 proto kernel scope link src x.x.x.x x.x.x.x dev ppp1 proto kernel scope link src x.x.x.x x.x.x.x dev ppp2 proto kernel scope link src x.x.x.x

yes, this is a crazy subject. I have 4 ADSL lines to the same provider, which even have the same gateway. Those lines are connected to the same machine (more crazyness: even connected to the same nic. it works fine, I swear). this machine will serve this conenction to a local net. so, I setup the ifaces correctly, everything works. I add balancing using this command: # ip route replace default

Hi list, I have tried google but just cant get this to work or figure it out. My setup ======== vanilla 2.6.13 kernel with CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_MULTIPATH_CACHED=y CONFIG_IP_ROUTE_MULTIPATH_RR=y CONFIG_IP_ROUTE_MULTIPATH_RANDOM=y CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=y CONFIG_IP_ROUTE_MULTIPATH_DRR=y My configuration: A host with two ppp links. Ontop of these two ppp dialup

Hi, I have been searching around and trying for a few days but still can''t get it works. Hopefully the highhand here can give me hints!! I have 3 adsl connections, 1 is using hardware broadband router to connect and the other 2 are using my debian linux pc to connect. I hope to setup a route policy so that all users except user1 and user2 will use the broadband router connect (eth0),

Hi all .... I Have installed Bering LRP on Many sites and I am very pleased with the capabilites of shorewall. Howerver I came across a prob that I am unaware ot its solution. Using shorewall 2.0.2f Kernel 2.4.24 On one Site LRP box serves internet outgoing connections through ( static IP ) a DSL line AND an incoming dial-in PPP conection. My shorewall configuration Is based upon the fact

Hi, it has been days now that i am looking for a maybe non existent patch for kernel 2.6.x , currently run 2.6.9 for the equalize option in iproute i use : /sbin/ip route add default scope global equalize nexthop dev ppp0 nexthop dev ppp1 have one pptp link and another pppoe i am monitoring the 2 links and what i see is that for multiplie connections to the same destination it does not split

Hi, can anyone help me with this problem i''ve got! I have a problem with routing on my Mandrake 7.2 Linux Box i was wondering if you could help me with. I live in Australia and as broadband access isn''t very available at the moment, i have 2 modems to dialup to my isp (dynamic ips assigned) to increase my bandwidth at an affordable level. What currently happens is i have a

Hi... I have 2 ADSL lines (ppp0 and ppp1) on the same machine, and at first moment, I just want to make them both ping correctly from the internet. I already setup 2 links on the same machine, following the item 4.2.1 (split access) of the LARTC-HOWTO. I guess it was one dial-up link and one ADSL. But now, I have two ADSL lines, both from the same provider, and both lines use the same P-t-P

Hi all, ive been using the nano howto to load balance to adsl links for a good while now ive got our live server running kernel 2.6.11.6 and these links work fine. i set up another server same model of machine and used the same kernel config ( wanted to try some tos stuff out) 2.6.11.6 but this one doesnt balance properly. what ever i put in table 222 (which is looked at from all sources) it

Hi Here is a short description of my network: ppp0 (adsl) ppp1 (adsl) | | | | --------------------- | Router | | Firewall | | MASQUERAD | | DNAT | | | | eth0 | --------------------- | | | ---------------------- |

Hi. Before start i need to say that i lost a lot of weekends trying every single posible solution on the net. So this i s my last resource. This is NOT an ERROR, is just help to make something work. (sorry for my english) Hi have 3 zones loc eth0 => here we have 192.168.1.0/24 with 12 IP''s/PC''s I can subdivide in 2 tematics zones but if not needed there is no reason to

I need basic PPPoE startup help. adsl-start DID bring up my PPPoE link (ppp0) to my ISP over eth0 via the DSL modem/bridge. My IPv4 CIDR block is routing and Shorewall is doing the firewalling. But shorewall has to be started after ppp0 is up and working. For now this means running shorewall restart (or start?). Shorewall 4.2 will have a way to restart shorewall without recompiling, I

#!/bin/sh PPP=(ppp0 ppp1) IP=(`ifconfig ${PPP[0]}|sed -n 2p|column -s ":" -t|awk ''{print $3}''` `ifconfig ${PPP[1]}|sed -n 2p|column -s ":" -t|awk ''{print $3}''`) GATEWAY=(`ifconfig ${PPP[0]}|sed -n 2p|column -s ":" -t|awk ''{print $5}''` `ifconfig ${PPP[1]}|sed -n 2p|column -s ":" -t|awk ''{print