similar to: tcng + NAT

//Just to not forget eth0 is WAN and eth1 is LAN . The box is NATing my lan. I configured tcng to shape both download and upload and i got connection loss again. Maybe it is my script fault or it is something bad with packets marking . this is how i mark outgoing packets iptables -t mangle -A MYSHAPER-OUT -p tcp -s 192.168.1.23 -j MARK --set-mark $ip and this part of my script which is intented

Hello all, I am trying to set up a simple htb based system, where packets with source ip 10.0.0.1 should have their own class. I plan to use tcng to set it up easier. Is there something wrong in my tcng file ? ~/tcng$ cat htb /* */ #include "fields.tc" #include "ports.tc" dev eth0 { htb ( ) { class ( rate 600kbps, ceil 600kbps ) {

Zviad O. Giorgadze wrote: > My ISP provides guarantied 115kbit bandwidth for GLOBAL TRAFFIC. During the low load period (early morning, evening, night) customers can get up to 1mbit traffic. That''s download traffic we''re talking about, since you seem to be shaping on your local LAN interface? Variable rate ISPs are tough to shape right, I guess... Does this 115kbit vs.

I am trying to shape a client (somewhat advanced). This is my target: Client is 192.168.2.224. I would like to allow him to download with 500000 bits/sec in general. But, for a specific port(say 22), i would like him to download with 300000 bit/sec only. The problem is that my configuration (maybe wrong) allows him to download with 800000 bit/sec. (500000 generally + 300000 on port 22) I thought

Thank you for your help. It generates this script : tc qdisc add dev eth0 handle 1:0 root htb default 2 tc class add dev eth0 parent 1:0 classid 1:1 htb rate 75000bps ceil \ 75000bps tc class add dev eth0 parent 1:0 classid 1:2 htb rate 125000bps tc filter add dev eth0 parent 1:0 protocol all prio 1 u32 match u32 \ 0xa000001 0xffffffff at 12 classid 1:1 But I thought it was necessary to

Help! I can''t get TCNG to compile!!! It did this on 2 different machines! Here are the errors: -------------------------------------------- Kernel: 2.4.22 [root@localhost tcng]# uname -a Linux localhost.localdomain 2.4.22-1.2149.nptl #1 Wed Jan 7 13:08:26 EST #if KFULLVERSIONNUM >= 0x20416 /* gratuitous interface change in 2.4.22 :-( */ ERROR: ake -f Makefile.unclean tcsim make[2]:

Hi, I downloaded the latest tcng release, however am having problems to build it.below are the kind of error messages am getting. Do u people have a clue as to why this is happening ? Thanks in advance =-============================================ - - - - make[3]: Entering directory `/home/joolia/tcnge/tcng/tcsim/ulib/iproute2/lib'' gcc -D_GNU_SOURCE -O2 -Wstrict-prototypes

hi all, i''m having problems building a module from my tcng configuration file. could someone verify the syntax for building a kernel module? i did it as shown below ... module gets built but i cannot load it. thanks charles ps -- sorry, don''t know c++ :-) [root]# cat /etc/tcng.test #define LAN "eth0" #define LAN_INGRESS 750000 #define LAN_EGRESS 750000 dev

Hi, I have tried unsuccesfully to limit my ftp server send speed in linux. I have an ipcop linux firewall/router with 2 nics. 1 nic (eth1) is connected to a 3mbit/384Kbit cable connection and the other (eth0) a switch. Behind it i have a suse linux box and a windows box. On the suse box i run proftpd. I need to shape my passive ftp send speed to 34KBytes because if it is maxed out at 45K

Hello mailing list, I don´t know how to use HFSC queuing discipline with tcng configuration language. I become always this error: syntax error near "hfsc" Is it possible, that tcng provides no support for this classful hfcs queuing discipline? Please help! thanks ----------------------------------------------------------------------------

Nobody knows something new about tcng? I really think that this kind of language help people, i order to do easier configurations i want to know how can i do in tcng a nested classes configuration with HTB? -- Juan Felipe Botero Ingeniería de sistemas Universidad de Antioquia _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl

FYI, i''ve just created a quick patch adding esfq (Enhanced Stochastic Fairness queueing discipline) for tcng (Traffic Control Next Generation). Patch is located at http://devel.dob.sk/tcng+esfq. Enjoy. Sam

Hi I''m completely stuck with the tcng language - I assume there must be some way to arrange queues hierachically like eth1 | TBF | PRIO / \ class class but my attempt (below) produces a "inferno.tc:8: qdisc "tbf" has no classes near "prio"" when run through tcc. dev eth1 { egress { tbf (rate 128kbps, burst 64kb,

Hello every one! I''m making a project to a discipline in the university and the project is make a Linux router that grants QoS to Multimedia connections (the prof. say we can use Open Source Soft. :) or reinvent the wheel). I have been googeling and googeling and i found the l7-filter in source forge and the spectacular simple language that is TCNG. Well the problem is how can i

Hello List, I''m new to QoS/tcng/HTB and friends, so please forgive me if my question might be silly... After having read lots of HowTo documents I''m totally confused... The Challenge: ============== I''ll have to deploy several "mirror" download servers (Linux) which must be able to handle a huge number of HTTP download requests (about 10k to 20k unicast

Hi I have tried to compile tcng-9m using Linux SuSE 9.1 Professional on my Intel box but it doesn''t work as follows: Step 1 - Downloaded iproute2-2.4.7_now_ss020116_try-i386-2.tgz Step 2 - Downloaded tcng-9m.tar.gz Step 3 - Downloaded linux-2.5.4.tar.bz2 Step 4 - Source kernel 2.5.4 extracted to directory ~/tcng/tcsim Step 5 - Source iproute2-2.4.7 extracted to directory

Hi, Trying to compile tcng on 64bit server (centos-5 64bit), I''m getting: -------------- cc -g -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -I../shared -DVERSION=\"`cat ../VERSION`\" -DTOPDIR=\"/usr/local/src/tcng-non-patched\" -DDOLLAR -DCONFIRM_EXCEED -c -o f_fw.o f_fw.c In file included from ../shared/memutil.h:13, from

Hi folks, first of all, sorry for my bad English ^^ and for the fact that I am a Linux N00b. I have a little Problem installing TCng on my Debian System. At the make install command the following error occured: tar: lib/tcng/include/klib/kernel/include: Cannot stat: no such file or directory tar: Error exit delayed from previous errors Can somebody help me ? greets Marcus -- GMX im TV

How To Installing tcng at slackware 10.1

Hi all, Can someone please help with a tcng setup? I have played with tc and tcng in the past, and now would like to get some serious rules in place. However, I have a difficulty in setting them up. My setup is as follows: One machine working as a firewall: eth0 is the interface connected to a 512K DSL line eth1 is connected to a LAN eth2 is connected to another LAN, a bit like a DMZ eth1 and