similar to: A newbie question

Ok, With everything restore on rtp.c, still I have no audio however the call is not destroyed immediately as before. I'm going to put a second Granstream box, and findout if between two boxes this happen too. I cannot believe that we cannot do 2 g726 on the same box at one time. Carlos -----Original Message----- From: Carlos Alperin [mailto:calperin@senecacom.net] Sent: Wednesday,

Dear sirs, I have the following situation: I need to prioritize traffic as this: Higher priority UDP traffic from VoIP servers, Medium priority http port 80, low priority SMTP & POP ports 25 & 110. Now, we run OSPF & BGP with Zebra routers on at least 8 different routers before going out to the Backbone provider. As I understand, the problem with Zebra is that only hold 1

Yes, I can call the phones, they ring, etc, and call call out, just no outbound audio. Is their any difference in the inbound & outbound audio streams in Asterisk that could cause it, e.g., different ports, protocols, connection/discovery methods, etc? Thanks, Ross ---------- Original Message ---------------------------------- From: "Carlos Alperin"

There has been numerous threads etc regarding this but all that has left me is more than a little confused :-(. I have setup and environment consisting of two OpenVPN tunnels and wish to load balance at the packet level between them. I am currently running on Linux edm 2.4.21-20.EL.c0custom #2 Tue Oct 12 08:52:23 BST 2004 i686 i686 i386 GNU/Linux And have install Quagga at each end to provide

I have a fairly simply laid out network that could easily use static routing. However, I plan to expand quickly and don''t wish to spend the better part of my life maintaining static routes. INTERNET | --------- Gateway | - LAN 172.16.1.x | - LINK 192.168.1.1 --------- |<----wifi --------- router 2 | -LAN 172.16.2.x | -Link 192.168.1.2 ---------

List members; I have been reading the digest for some time now and I would like to ask some conceptual questions. I am a telecommunications systems designer and not a software guy, but I have tried and used a number of the tools availabel in the LARTC and Iptables, and many of the other great things included in Linux. We are designing commercial products and I don''t want to ask my

Hello. I''m running linux box with Slackware 9.1 and compiled kernel 2.4.31 with "yes" to VLANs and "yes" to all QoS. On this box i have more ethernet interfaces: eth0 eth1 eth2 and so as more vlan interfaces: eth0.100 eth1.3 eth1.4 This is entrace(uplink) router to our whole network and my goal is to shape users on this machine. I want for this purpose use HTB so

Dear Sir, I have point-point ethernet connections to my linux boxes on which I am running Zebra OSPFD. I am unable to understand the output of the tcpdump. Please clarify the terms in the output. The output of the command tcpdump on BOX 1 is as follows: I have also shown a part of my network below. 14:0831.849801 eth0 M 192.168.2.2 > 224.0.0.5: OSPF v2-hello 48: rtrid 192.168.4.2 backbone

I tried to test Asterisk 1.4 on FC6 x86_64. I have it working on FC5 x86_64 very good, but since FC keeps updating, I tried to follow newer kernel versions. I can't pass the zaptel compilation. Everything is OK, but when I finished, and tried to load it, allways got module not found when I run modprobe zaptel, and modprobe ztdummy. I already tried to modify is with the sed 1 option but

I finished to try to install Asterisk Now 1.4.0 on an AMD 3800 dual processor machine. The install lookups on the search for the Sata drive, since however it loads the sata_sil driver it doesn't work. Did someone knows what version of Linux is using on Asterisk Now? Thanks, Carlos Alperin -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, all! Can I enable multicasting via shorewall? I have router with Gentoo Linux (one interface to ISP, one with alises - to local network). Shorewall work perfect! But now I need setup Quagga (zebra) for dynamic routing between one more router via another provider. All routers daemons (zebra, ripd, ospf) used multicasting. In my configuration already enabled allowBcast and etc.

Hi all, I am using a redhat 8.x linux box configured with zebra routing software which is also configured with ospfd I have 2 backbone routers running ospf connected to different isp''s I have 3 local routers also running ospf within themselfs and also with the 2 backbone routers (all are linux boxes) router A - backbone router 1 router B - backbone router 2 router C - local router 1

Before I start, I don''t want to do ECMP or simple bonding ... I have multiple Internet connections available to multiple boxes on one of my networks. Box A connects to ISPs 1, 2 and 3 Box B connects to ISPs 1 and 4 Boxes A and B are both connected to each other and the rest of the network. 1) I would like to set up some dynamic routing in such a way that any given outgoing packet from

My setup: LAN A | |-- Wireless-r1 --| |-- Wireless-r2 --| ..................| .................LAN B LAN A is my primary (external) LAN. LAN B is my wireless LAN. LAN A does iBGP and OSPF routing. Each wireless router does the following: 2 Bridged Ethernet + STP connections to LAN A 2 Bridged Ethernet + STP connections to LAN B 2 VLANs on LAN A 5 VLANs on LAN B UCARP on each wireless

I have, for the time being, decided to split my dual ISP/single shorewall connection into two shorewall connections/boxes, each handling one ISP. I am running OSPF in the network and so far things are working out fairly well (from a client of the two gateways). $ ip route ls 10.33.66.2 via 10.75.22.199 dev eth0 proto zebra metric 20 192.168.200.1 via 10.75.22.254 dev eth0 proto zebra metric

I manage internet access for our company. We have our main link which is a 2 meg leased line, we then have a 2 meg adsl line for backup from a different ISP What i want is live failover for outgoing traffic, not only for complete link failures but also when then main isp has routing issues to a given ip range (e.g during the recent disruption to 2 of the transatlantic links) The solution

Hi Nitin, First of all, you can verify that ntpd is responding on ingress with netcat : nc -u ingress 123 (udp connection on port 123) also try a netstat -an on ingress to be sure that the port 123 is in listen state... I recently install ntpdate, and it has worked as a client and a local ntp server immediatly. Good Luck, Yannick / Annecy in France -----Message d''origine----- De :

Hello Anyone used Zebra routing daemon and created virtual routers before? Is it possible to run OSPF/BGP on each virtual server and get them to talk to each other? I''m new to Xen and I need to know... I will be trying this out in the coming days and I want to know about any pitfalls to avoid. -- Nonchalantly yours GobbledeGeek [Every thing but Gobbledegook.. !!]

We''re trying to figure out how to have equal cost multipath routing using OSPF (quagga) and have come up with the following... Has anyone done something similar? -- How do you deal with incoming services (mail/web/etc) in such a scenario as below - And does anyone have any suggestions? There''s more detail below.... Diagram and overview: Network A connects to Core1 and Core2

Hi all, I am currently trying to emulate a satellite link, via Netem, on a testbed which is OSPF-enabled. I''d like to set up a Netem box between two routers. Since all routing between routers is dynamic, I''m wondering how to set up OSPF on my Netem box? Could someone indicate me if it is feasible and give me some guidelines to possibly do so? Thanks in advance, Vincent.