similar to: PRIO inside HTB - trouble attaching filters correctly?

Hi, I wanted to implement some QOS on my Linux Box with HTB, but after some time spend on the configuration and tests, I still don''t manage to have some correct results. Here are the details : -ROOT 2000 kbits -HIGHPRIO SUBCLASS 50 kbits prio 0 -SUBCLASS1 750 kbits prio 1 -SERVICE1 250 kbits prio 1

hello folks, this is my first post to that list. so I hope I am not completely OT here :-) reading the (excellent!) lartc and then writing my own qos-script I have still some open questions which I will try to formulate now: - "Now we can optionally attach queuing disciplines to the leaf classes. If none is specified the default is pfifo." - I can''t find info about Pfifo.

Hello, I use HTB with linux-2.4.20-ac1 and iptables-1.2.7a (pathced for IMQ). I configured one HTB qdisc on an IMQ device. This qdisc has some classes (about 5) and all of the classes has qdisc pfifo. I sometimes got out from my linux (while I was working) and I found in logs: Dec 4 11:49:27 core kernel: HTB init, kernel part version 3.7 Dec 4 11:49:28 core kernel: HTB: quantum of class

I thought that the below email would be of interest to LARTC readers. I wasted quite a bit of time tracking down this "feature" (bug?). Any comments that shed light on this would be appreciated. In short, "tc filter" + htb + bridging works only with ip_forward off. Andrew Athan ----------------------------------------------------------------------- All: It seems that

Hi, I have some interesting problem with htb , I set up root class and sub-classess: $TC qdisc add dev eth0 root handle 1: htb $TC class add dev eth0 parent 1: classid 1:1 htb rate 1990kbit ceil 2000kbit $TC class add dev eth0 parent 1:1 classid 1:10 htb rate 190kbit ceil 200kbit $TC class add dev eth0 parent 1:1 classid 1:11 htb rate 1400kbit ceil 1600kbit $TC class add dev eth0 parent 1:1

Hi, I''ve failed miserably in my endeavours so far and I''m at the point where help would be much appreciated. I want to have 3 bandwidth limited classes on my Internet interface. In each of those classes I want 3 prioritization bands, and then use "tc filters" to place the traffic into the correct class and priority. The problem is that the traffic

hi all, i saw this message today & am reporting it(as it says) [root@cab1 surfNet]# tail -f /var/log/messages Sep 1 04:02:03 cab1 syslogd 1.4.1: restart. Sep 1 09:35:27 cab1 kernel: HTB: mindelay=500, report it please ! [root@cab1 root]# iptables -V iptables v1.2.6a [root@cab1 root]# tc -V tc utility, iproute2-ss020116 [root@cab1 root]# uname -a Linux cab1 2.4.19-r #2 Sun Aug 25 01:49:24

Help me  ... I try use the tc filter, but seems he doesn''t work, I already reconfigured my kernel ( 2.4.32 ) with all options related a QOS enabled ( like modules ) and nothing happens. I get the tc tool from HTB source package, well  this is my set : eth0 is my internal NIC. tc qdisc add dev eth0 root handle 1: htb default 12 tc class add dev eth0 parent 1: classid 1:1 htb rate

Hi again, I keep posting about my problem with HTB -> http://mailman.ds9a.nl/pipermail/lartc/2005q3/016611.html With a bit of search I recently found the exact same problem I have in the 2004 archives with some graphs that explain it far better than I did -> http://mailman.ds9a.nl/pipermail/lartc/2004q4/014519.html and http://mailman.ds9a.nl/pipermail/lartc/2004q4/014568.html

Hello all, Please could someone help me with this, I have been trying for days to get this to work. I would like to have BE, AF & EF classes with HTB qdisc. I can''t find any scripts online where this has been done. If I enable this filter: #tc filter add dev eth0 parent 2:0 protocol ip prio 1 \ #tcindex mask 0xf0 shift 4 pass_on then BE & AF classification seems to be fine but

Help me  ... I try use the tc filter, but seems he doesn''t work, I already reconfigured my kernel ( 2.4.32 ) with all options related a QOS enabled ( like modules ) and nothing happens. I get the tc tool from HTB source package, well  this is my set : eth0 is my internal NIC. tc qdisc add dev eth0 root handle 1: htb default 12 tc class add dev eth0 parent 1: classid 1:1 htb rate

I''m streaming audio over a WAN that is 1.5Mbit/s. The audio has to go both ways and can be over tcp or udp. The manufacturers recommend udp as it has less overhead but has a higher chance of dropping out. The audio requires 130-200kbit/s in each direction for a combined 260-400kbit/s. I have two transparent bridges on either side of the WAN to do traffic control. I split it so

Hi, I''m trying to use prio qdisc with htb, however not the "usual" way (like for example FairNAT). Here is my idea: Root has HTB shaping traffic to link speed -> then goes PRIO queues -> each prio queue has HTB with sublasses for each user, should look like this: 1: htb qdisc | 1:1 htb class

Hi all, First, let me say I''ve been most impressed with how quickly and professionally people on this list ask and answer questions. Next, let me say that with which I need help is properly configuring strict PQ, and gathering certain stats. Specifically: - I need to create a priority queue with four queues (let''s say they are of high, medium, normal, and low priority) - I

Hi, I''m trying to setup QoS in my TSL box. Following to mailing list reccomendations I changed PSCHED_CPU but can''t get accurate shaping with HTB. I have disabled HYSTERESIS also (by setting it to 0). I have Intel Celeron 1.8Mhz (TSC supported I think). ******** My script ****** tc qdisc add dev eth0 root handle 1: htb default 22 r2q 10 # Class corresponding interface

Hey, I have such a script: tc qdisc add dev $DEV root handle 1:0 htb default 21 r2q 2 tc class add dev $DEV parent 1:0 classid 1:11 htb rate 100mbit tc class add dev $DEV parent 1:11 classid 1:21 htb rate 512kbit ceil 512kbit tc class add dev $DEV parent 1:11 classid 1:23 htb rate 1024kbit ceil 1024kbit tc class add dev $DEV parent 1:11 classid 1:25 htb rate 3072kbit

Hello, I have problems setting up HTB. This is my setup : NET 1024/256 ADSL || eth1 Linux Firewall eth0 || LAN 10.a.a.a I want to GUARANTEE for an IP (10.x.y.z) a 800kbit bandwidth for HTTP download. But When 10.x.y.z does no HTTP download, other trafic must get the whole bandwidth, of course. The script I use (see below) is quite the same as presented at (the greeeeat page) :

Hi all, I''m experimenting with HTB and the prio parameter and it does not give me results I expect. I''ve created 4 HTB classes: 1:10 TCP ACKs (prio 0) 1:20 TCP traffic on dst port 10001 (prio 1) 1:30 TCP traffic on dst port 10000 (prio 2) 1:40 Default (prio 3) ceil and rate parameters are the same for all 4 classes (rate is

Hi, machine: AMD K6 200 MHz Linux distribution: Mandrake 8.1 kernel: compiled 2.4.21 applied this: #define PSCHED_CLOCK_SOURCE PSCHED_CPU in file linux/include/net/pkt_sched.h bevore compiled the kernel (described on http://www.docum.org/stef.coene/qos/faq/cache/40.html) bandwitch on eth0: 128kbit The most simple configuration - 122kbit guaranted for WWW (sport 80) and

hello, a friend of mine have this configuration: 10 x PC -- router/linux/rh8 -- ADSL Modem -- ISP let''s say that the bandwidth is: 5M and 800K he does dc++ and counter-strike, so let''s say the UP is full, and the ping from the counter server is 300ms, the server cut the connection, and no more game, the player is unhappy. The normal ping is 50ms. so he thinks to put some