similar to: problem - multiple links to a network

Hello Im having a problem similar to sawar Here is my configuration --------------eth1---192.168.1.128---------- -------------192.168.1.1 ISP router 1 | my | ---Eth0---192.168.10.157----| | | linux |

Hello all I continue fighting with load balancing, I though it was easier :-/ Here is the script with my configuration #!/bin/sh IFI=eth0 IPI=192.168.10.155 NMI=24 IFE1=eth1 IPE1=192.168.1.128 NWE1=192.168.1.0 NME1=24 BRD1=192.168.1.255 GWE1=192.168.1.1 IFE2=eth2 IPE2=192.168.254.128 NWE2=192.168.254.0 NME2=24 BRD2=192.168.254.255 GWE2=192.168.254.254 ip link set $IFI up ip addr add

Scenario: Our Asterisk 13 PBX (on network 192.168.254.0/24, bound to 192.168.254.1:5060) is behind a NAT, acting as a client to our ITSPs SIP server. But also, this Asterisk is server for various VoIP telephones. Acoording to Asterisk's wiki, the transport section of pjsip.conf is configured as follows: ; Transport via UDP [transport-nat-udp] type= transport

Hello * community, I have 2 * boxes spanning a t1 with hdlc. I'm trying to route packets so people on a subnet seperate of the * boxes can browse the boxes on the * spanned subnet. The * boxes and the boxes on subnet controlled by * can see everything. The boxes on the seperate subnet inside the company can only see so far as the first * box and can't ping across the span.

Gents, first of all thanks for tinc, and thanks in advance for your advice. At the risk of revealing my stupidity and opening myself to ridicule.... I am trying to connect a new remote lan into an existing tinc vpn with the central tinc vpn server located at 10.57.132.1 on the 10.57.132.0/24 subnet. I set up this central tinc vpn server myself along with several other remote lans linked to

Hello everyone, I have followed this guide to enable my Windows 10 guest to reach my Arch Linux host: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Virtualization_Host_Configuration_and_Guest_Installation_Guide/App_Macvtap.html My VM now has 2 NICs: - macvtap (VEPA) - virtual network 'isolated' I have statically assigned the IP 192.168.254.2 to my

Hello everyone, I have followed this guide to enable my Windows 10 guest to reach my Arch Linux host: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Virtualization_Host_Configuration_and_Guest_Installation_Guide/App_Macvtap.html My VM now has 2 NICs: - macvtap (VEPA) - virtual network 'isolated' I have statically assigned the IP 192.168.254.2 to my

Hi, The private adresses (192.168.254.0/255.255.255.0) of my network are sent dynamically by dhcp on my network. The dhcp server is on the firewall which address is 192.168.254.1/255.255.255.255 (this address is static). I''ve got a rsync server on this network which is on a separe server. His address is 192.168.254.200/255.255.255.255 (this address is static). I want that the users

Hi, This is the first time I write to the list. My english is not so good, but I hope I''ll be understood. I have 4 adsl routers, plugged on a linux box, and this box e used to connect to a local network. The linux box has 5 NICs. eth0: local network inet 10.0.0.56/24 brd 10.0.0.255 scope global eth0 eth1: adsl router 1 inet 192.168.254.1/24 brd 192.168.254.255 scope global

Dear All, I am trying to enable router mode of tinc on Windows 7 platform. Although I have enabled the router mode and IP routing in Windows 7 PC (Network A Server). The PC B is still unable to connect the Network A and PC A. But the Network A and PC A is able to communicate each other via tinc. Please help and advise me any incorrect of that. Network A server Real - LAN adapter IP:

Hello all, We have a Mandrake 10.1 server with Samba 3.0.13. The box has 2 NICs, 2 IPs and our DNS servers have both entries (same name for 2 IPs). Since kerberos is not working around here (tried to fix it for about 3 weeks, then gave up) I found my workaround: I use NetBIOS alias for my server, all clients use this alias for samba access and they authenticate thgrough SSPI. My problem is that

Hi When I start shorewall, the multicast stream is stopped. My config: Windows VLC Client-----eth0:192.168.254.1/24--fw---eth1:191.168.254.254/16-------------------------Linux VLC Streaming server 192.168.254/24 lan wan (but it''s really a internal lan !) 191.168.1.21/16 on the FW/shorewall route add -net 224.0.0.0 netmask

I'm quite new to Asterisk and using Asterisk 13 on FreeBSD current. Asterisk is behind a NAT router, the physical setup is very much a trivial one. The Asterisk PBX is supposed to act as the telephone gateway for several VoIP/SIP phones. I'm using throughout pjsip as configuration, I have no experience with chan_sip since I started recently using Asterisk for several SoHo and lab's

Hi, 'm trying to setup a Win 2k8 r2 as member server of my domain as Andrew did on his video, but I've come across this error: Aug 9 22:47:10 voip named[17100]: client 192.168.254.160#62102: updating zone 'samba.dghvoip.com/IN': update unsuccessful: samba.dghvoip.com: 'name not in use' prerequisite not satisfied (YXDOMAIN) I followed SambaWiki howto word by word, and my

Hi I have a default route to 192.168.1.1 as soon as I start shorewall the default route dissapear. What do I need to do to have it not disappear. Kind Regards My network setup /etc/network/interfaces: # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.17 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255

Hi, You will find attached the output of "net ads testjoin -d4" and "-d3". Yes replication seems to work properly. Alexis. On 07/06/2016 18:55, lingpanda101 at gmail.com wrote: > On 6/7/2016 12:31 PM, Alexis RIES wrote: >> I was wrong, the problem persists, it is not because of the DNS. >> You have the same configuration as me, but with two domains controller

Hello everyone! I'm trying to get tinc running, but couldn't make it until now... My current situation is: all tincs are connected, but there ist (almost) no traffic: Only two PCs are able to ping to another, but not to itself. Let me explain, what I'm planning to do: I've got four networks: PROM: 10.69.0.0/16 PAN: 192.168.30.0/24 (I'm afraid, I can't change PAN to

Hi, here it attached my smb.conf and Winbind debug log after reboot. My OS is Debian Jessie and has a fixed ip. Thank you On 06/06/2016 22:05, Rowland penny wrote: > On 06/06/16 14:52, Alexis RIES wrote: >> Hello, >> >> After each reboot, my Samba AD member server lost domain join after >> reboot, I have to re-enter the server in the domain with the "net ads

Hi all, I have set up a working OpenVPN2 connection between my Server and my gateway at home. Now I want all traffic to be routed through this VPN connection. Currently everything is going through eth1 to the internet (to the gateway of the University which forwards it to the internet :-). We must use a prox-server and because of this I am not abel to watch the real-Media streams on

Using RedHAT 9.0 and Samba that came with it.. Samba states it is up and running..Here is the current samba.conf file.. I can browse from the linux box and get into the window shares. Can ping the address of the linux server.. See the workgroup from windows, but no machine or folders available.. Please Help.. Thanks, Mike #samba conf-12-12-03 # Global parameters [global] workgroup = rharch