similar to: HTB is being hang my computer :/

ive got such network: |--------| |-------------| | WORLD |---|ROUTER/server| ------ NATED LAN |--------| |-------------| I want to use imq on ROUTER, what behaviour to choose ? AA, BA, AB, BB ?? --

i''m trying to limit upload and download but something is wrong(it is about NAT) i will post here my "script" maybe someone could tell me what is wrong my kernel(2.6.9) is patch with imq(linuximq.net) and my iptables(1.2.11) also #flush tc qdisc del dev eth0 root tc qdisc del dev eth1 root tc qdisc del dev imq0 root tc qdisc del dev imq1 root ifconfig imq0 down

Hello everyone... I have a little trouble and need some help :P How can I check on which interface the packet is going (eth0, eth1; I have two ISP and on eth3 little LAN), using to check it TC and IMQ? (HTB script) I tried to mark packets, but on chain POSTROUTING this does not work... Maybe because packets fall on IMQ before signing. I tried marking it on FORWARD but packets also

Folks, I''m so surprised what happened to my box just in the few weeks lately. Here is my setup: INTERNET <----------> [eth0] SHAPER-BOX [eth1] <----------> USER-FARM both eth0 & eth1 got public ips (202.x.x.x) Why traffic monitored at eth0 is bigger than eth1 ? eth1 shaped just exactly the same as rate i defined in HTB. I just have 1024Kbps from my ISP and i defined the

On my debian woody (kernel 2.4.31) the tcpdump doesn''t work with imq0 devices. If I try to tcpdump imq devices there is no packet seen: [...] rt1:~# tcpdump -n -i imq0 Warning: arptype 65535 not supported by libpcap - falling back to cooked socket tcpdump: WARNING: imq0: no IPv4 address assigned tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on

ingress can be used to control the incoming packet, such as: tc qdisc add dev eth0 handle ffff: ingress tc filter add dev eth0 parent ffff: protocol ip prio 5 u32 match ip src 172.16.1.11 police rate 10kbit burst 10k drop flowid :1 tc filter add dev eth0 parent ffff: protocol ip prio 5 u32 match ip src 172.16.1.22 police rate 10kbit burst 10k drop flowid :2 first ,I do not sure these method can

On 2/19/07, Salatiel Filho <salatiel.filho@gmail.com> wrote: > Well , thanks to imq all my client machines are now shaped and > everything is great ... > But now i have a doubt , is there a way to shape the traffic that goes > to the route [doing a wget from the router for example ]? > > > I have a PREROUTING IMQ0 and a POSTROUTING IMQ1 , everything is > working like

Hello, I wrote a simple traffic shaping script (below) that should have allowed me to shape my internet traffic a bit (ppp0 - adsl 128kbit/64kbit; local interface eth0). The script works only partially - the speed is being limited but too much. Without running this script my download rate is about 10kBytes (with second computer also downloading at about 6kBytes). After running it my download speed

Hi there! Some questions I couldn''t find an answer for: IPtables: - Is it possible to filter those ACK-packets (to eleminate problems with ADSL-connections) with IPtables? It wasn''t possible with IPchains, so u32 had to be used. Now there is this nice little --tcp-flags option. But I just don''t know if this is all I need. The u32 was checking for packetsize too. So if

Hi folks, I have three network cards on my Slackware box and eth0 and eth1 are for two Internet connections. They have imq0 and imq1. All traffic shaping works fine. Internal eth2 does no traffic shaping. But recently I have put two OpenVPN tunnels (tun devices) and both work via eth0. So my question is - how to shape the traffic on these tun0 and tun1 devices? Thanks Remus

bridge was configured with "brctl" three NIC was bind to br0 imq and htb was used to control traffic. #modprobe imq numdevs=3 "htb scripts" #iptables -t mangle -A PREROUTING -i br0 -j IMQ --todev 1 #ip link set imq1 up but this can not do the traffic controling. please tell me how can i do _________________________________________________________ Do You Yahoo!? 银行巨头聚会中原

Hello, I''m trying to get my shaper to work, but have only a partial success. Can someone help me with that. My setup unfortunately is not so trivial, but I think some people could have similar one... 1. There is a router connected to the internet line via interface eth0 2. There are users connected to the router via two interfaces : eth1 and wlan0 3. All users are assigned private IP

Hi, I have a default class for my un-marked traffic (prio 5) and a prio 0 class for the important stuff, but I do not understand why my download traffic is duplicated in both. It work fine for my upload traffic (same setting except the red class but I have the same result if I create an esfq instead). Any comments/information will be appreciated. Below my config : tc commands from my scirpt :

I have: tc qdisc add dev imq0 root handle 1: htb default 30 tc class add dev imq0 parent 1: classid 1:1 htb rate 512kbit ceil 512kbit tc class add dev imq0 parent 1:1 classid 1:30 htb rate 64kbit ceil 512kbit then: iptables -t mangle -A PREROUTING -i ppp0 -s 192.168.2.2 -j IMQ --todev 0 tc class add dev imq0 parent 1:1 classid 1:22 htb rate 64kbit ceil 128kbit tc filter add dev imq0 protocol

Hi! By iptables I set marking (-j MARK) just before -j IMQ. There are only three marks. Exectly all of them are ditected to 1:20 Why I see 3 pkts in default 1:30? How explain it? ### imq0: queueing disciplines qdisc htb 1: r2q 10 default 30 direct_packets_stat 0 Sent 631429 bytes 1812 pkts (dropped 0, overlimits 20) ### imq0: traffic classes class htb 1:20 root prio 0 rate 100Kbit ceil

Hi All, I''m trying to create a contended section of bandwidth using IMQ. I have the imq0 device up and running, with traffic passing through it. Firstly, I need to throttle the entire device imq0 to 2mbit/s. I would then like to add throttle rules for individual IP addresses, allowing them to pass up to 512kbit/s each, as long as imq0 has not reached its 2mbit/s. The configuration

Hello I have a server with a dsl connection on eth1 and local interface eth0. Because of the NAT i cannot direct traffic to IMQ device in PREROUTING chain but have to use INPUT and FORWARD. So i use rules. iptables -t mangle -A INPUT -i eth1 -j IMQ --todev 0 iptables -t mangle -A FORWARD -i eth1 -j IMQ --todev 0 And now the strange thing: FORWARD traffic gets directed nicely to the IMQ, but

Hi ! I have a single host which is connected via an 512kbit ADSL link to the n= et. I quite often use some realaudio application that uses some bandwidth = and I want to avoid other traffic to scale that bandwidth down. So I used = some classes (with htb) on imq0 device and applied some filters and it see= ms to work in most cases. However, there are some sites with which downloa= d is

Hi! I have read all informations i could find, but some things are still not clear. My setup is: ---INTERNET1(eth0)-\ /- Local net1 (eth2) GW ---INTERNET2(eth1)-/ \- Local net2 (eth3) I have NAT and a working setup using HTB,SFQ, classifying with the iptables -j CLASSIFY way. I shape only the traffic coming from the internet heading to the intranet. I would like