similar to: HTB + IMQ + IPtables marking.

i''m trying to limit upload and download but something is wrong(it is about NAT) i will post here my "script" maybe someone could tell me what is wrong my kernel(2.6.9) is patch with imq(linuximq.net) and my iptables(1.2.11) also #flush tc qdisc del dev eth0 root tc qdisc del dev eth1 root tc qdisc del dev imq0 root tc qdisc del dev imq1 root ifconfig imq0 down

Hello, I wrote a simple traffic shaping script (below) that should have allowed me to shape my internet traffic a bit (ppp0 - adsl 128kbit/64kbit; local interface eth0). The script works only partially - the speed is being limited but too much. Without running this script my download rate is about 10kBytes (with second computer also downloading at about 6kBytes). After running it my download speed

On 2/19/07, Salatiel Filho <salatiel.filho@gmail.com> wrote: > Well , thanks to imq all my client machines are now shaped and > everything is great ... > But now i have a doubt , is there a way to shape the traffic that goes > to the route [doing a wget from the router for example ]? > > > I have a PREROUTING IMQ0 and a POSTROUTING IMQ1 , everything is > working like

Hello to all people there . Can i guarantee ICMP respond time no metter how loaded is internet line . i have typical NATed enviroiment like External IP |linux router| LAN - 192.168.0.0/24 i have example setup with IMQ but is it possible to be done also if i attache htb to eth0 and eth1 for example . if i start shaper ping i better that without shaper but it''s not guarantted i mean

Hi all, my IMQ device works OK (thanks to Andy Furniss), but now I''ve problems to attach the traffic in the qdisc''s. This is my conf: ----------------------------------------------------------------------- INET | |eth0 300Kbps ROUTER (NAT) |eth1 | LAN ----------------------------------------------------------------------- MAX=300 tc qdisc add dev imq0 root handle 1: htb

Hi, I have a default class for my un-marked traffic (prio 5) and a prio 0 class for the important stuff, but I do not understand why my download traffic is duplicated in both. It work fine for my upload traffic (same setting except the red class but I have the same result if I create an esfq instead). Any comments/information will be appreciated. Below my config : tc commands from my scirpt :

Hello, I''m trying to get my shaper to work, but have only a partial success. Can someone help me with that. My setup unfortunately is not so trivial, but I think some people could have similar one... 1. There is a router connected to the internet line via interface eth0 2. There are users connected to the router via two interfaces : eth1 and wlan0 3. All users are assigned private IP

Hello everyone... I have a little trouble and need some help :P How can I check on which interface the packet is going (eth0, eth1; I have two ISP and on eth3 little LAN), using to check it TC and IMQ? (HTB script) I tried to mark packets, but on chain POSTROUTING this does not work... Maybe because packets fall on IMQ before signing. I tried marking it on FORWARD but packets also

I have: tc qdisc add dev imq0 root handle 1: htb default 30 tc class add dev imq0 parent 1: classid 1:1 htb rate 512kbit ceil 512kbit tc class add dev imq0 parent 1:1 classid 1:30 htb rate 64kbit ceil 512kbit then: iptables -t mangle -A PREROUTING -i ppp0 -s 192.168.2.2 -j IMQ --todev 0 tc class add dev imq0 parent 1:1 classid 1:22 htb rate 64kbit ceil 128kbit tc filter add dev imq0 protocol

Hi ! I have a single host which is connected via an 512kbit ADSL link to the n= et. I quite often use some realaudio application that uses some bandwidth = and I want to avoid other traffic to scale that bandwidth down. So I used = some classes (with htb) on imq0 device and applied some filters and it see= ms to work in most cases. However, there are some sites with which downloa= d is

Hello I have a server with a dsl connection on eth1 and local interface eth0. Because of the NAT i cannot direct traffic to IMQ device in PREROUTING chain but have to use INPUT and FORWARD. So i use rules. iptables -t mangle -A INPUT -i eth1 -j IMQ --todev 0 iptables -t mangle -A FORWARD -i eth1 -j IMQ --todev 0 And now the strange thing: FORWARD traffic gets directed nicely to the IMQ, but

bridge was configured with "brctl" three NIC was bind to br0 imq and htb was used to control traffic. #modprobe imq numdevs=3 "htb scripts" #iptables -t mangle -A PREROUTING -i br0 -j IMQ --todev 1 #ip link set imq1 up but this can not do the traffic controling. please tell me how can i do _________________________________________________________ Do You Yahoo!? 银行巨头聚会中原

Hi folks, I`ve a problem to use HTB and SFQ. The first script, below, to show a simple configuration, does work fine...!!! But, in the second example, does not work, becouse i put more code to clasify the traffic by protocol, http and ftp in this case. Somebody can tell me the errors? Thx, in advance.- NOTICE: IMQ device is to asociate with ETH1 my external iface. SCRIPT que funciona:

What''s wrong... I have Celeron 633MHz nd 768Mb RAM. When I''m running my script everything is OK, but when I''m connecting Internet and LAN link computer is hanging. But when i dissconnect this everything is OK. I have 500 users, 1500 classes and 3000 filters. Is it normal? What should I do?

hi stef oone more pb while shaping incoming traffic with imq .this one tc qdisc add dev imq0 root handle 1: htb default 20 tc class add dev imq0 parent 1: classid 1:1 htb rate 2mbit burst 15k tc class add dev imq0 parent 1:1 classid 1:10 htb rate 1mbit tc class add dev imq0 parent 1:1 classid 1:20 htb rate 1mbit tc qdisc add dev imq0 parent 1:10 handle 10: pfifo tc qdisc add dev imq0 parent

Hello, I have a serious problem with HTB which I wasn''t able to solve myself. I run a masquerading router with ppp0 as interface to the Internet. Three clients need to share a downstream of 1 MBit, which I want to divide with tc. When I see a packet being forwarded to one of these clients, I give it the appropriate unique mark: iptables -t mangle -A FORWARD -d 192.168.34.141 -j MARK

Hi I try setup imq pseudo device for shaping I''m work such script #!/bin/sh TC=/sbin/tc /sbin/modprobe imq numdevs=1 /sbin/ip link set imq0 up $TC qdisc add dev imq0 handle 1: root htb default 1 $TC class add dev imq0 parent 1: classid 1:1 htb rate 10mbit # client1 tunnel tunnel $TC class add dev imq0 parent 1: classid 1:2 htb rate 256kbit $TC filter add dev imq0 protocol ip parent 1:0

On my debian woody (kernel 2.4.31) the tcpdump doesn''t work with imq0 devices. If I try to tcpdump imq devices there is no packet seen: [...] rt1:~# tcpdump -n -i imq0 Warning: arptype 65535 not supported by libpcap - falling back to cooked socket tcpdump: WARNING: imq0: no IPv4 address assigned tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on

ive got such network: |--------| |-------------| | WORLD |---|ROUTER/server| ------ NATED LAN |--------| |-------------| I want to use imq on ROUTER, what behaviour to choose ? AA, BA, AB, BB ?? --