similar to: Equal bandwidth for any client (i.e. automatic class generation)

Hi, How can I set equal bandwidth of 512kbit downlink and 256kbit uplink for every single IP address of 254 IP addresses I have in my LAN? Regards, ro0ot

Hi all, I need to provide shell hosting for about 40 users, and few days ago I found the wondershaper script, so Im trying to know if this script could help me to improve interactive ssh/telnet connections. Wondershaper could help me or its only efective on OUTGOINGS requests? Ok, any comment and feedback will be welcome. Sorry for my bad english and THANKS in advance.

i''am new here and i saw some tutorials but those was old for the 2.4.xkernel and i don''t know were to start correctly. many thanks to all of you. sincerly: Timi _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Hello, we are using HTB for dividing 15 Mb/s upload rate to 1022 classes (rate 14 kb/s, ceil 15 Mb/s), but sometimes ksoftirqd_CPU0 uses the most of the CPU-time (over 90% CPU load is casual in such situation). This situation occurs several times a week and takes minutes or one hour and during that time it has enormous packet loss. Reboot of the machine usually solves this problem. Because

Dear members, I am trying to share the bandwith for all users fairly. because some users heavily uses p2p programs and a few hosts consume most of bandwith. when we limit each flow it does not work as one client has many connection at same time. Firstly I tried to write a script that use the ipfm(which accounts traffic usage) logs as follow .extract ip addresses heavy bandwith users from

Hi, I want to see bandwidth every ip address in the local network that passing my linux gateway in the console, may be it''s similar like mrtg (web based version) It''s possible ? Best regards, >--<Kristiadi Himawan>--<

Hi everybody. I have a dilema and I think you guys can help me out. I am trying to shape the bandwith for about 500 clients, and I want the bandwith to be alocated dynamicly. Lets say I have 4 MB bandwith. I give each ip (500 IP''s) a sustained rate of 4 KB/sec . I wonder if I can shape the bandwith so when for example only 100 clients are online, to give them a rate of 4MB/100. How can

I am working on traffic shaping using the nextenso proxy platform(a product of alcatel)on linux platform, I wish to do dynamic traffic shaping means on a fly, is that possible with TCNG?? With Warm Regards, Aruna Baghel "Gratitude can transform common days into thanksgivings, turn routine jobs into joy, and change ordinary opportunities into blessings."

Hi, at my local university network, I have to make sure no student uploads more than x GB/day. So far, I give them unlimited bandwidth until they have more than y GB (y<x) upload. After that, I use the u32 filter to associate the affected IP address with a HTB class limited to the rate (remainingtraffic/remainingtime). Since the accounting is done with ipt_ACCOUNT right now and the netfilter

Guys All the recent discussions recently, and the knowledge of a 2.6 port, of WRR has made me very keen on trying it. I had a look at the docs and examples know but my mind is not in a very receptive state. Take this simple example. Incoming internet connection of 1mbps. Shared between up to 25 users simultaneously. I know that WRR can fairly distribute the traffic amongst the currently

Hi folks, So, I have a pretty simple setup - a linux router machine running as a firewall/router for a small neighborhood LAN (approx 20 machines). I also have squid running on the box in non-transparent mode, and also I have set up NAT for TCP/UDP ports above 1024 for all clients and SSH/POP/SMTP/CVS NAT''d for selected ones based on MAC filtering. No hosts whatsoever can access ports 80

Hi all As part of may project i wants to implement the WFQ in linux, at present upto my knowledge there is no such implementation in linux. The only mannual i got from "Csaba Toth", He explained the tc command so i hope that is in linux also. DID any one know about it, Please infome me about it also, Thanks for all regards ********* *Sunil* *********

I would like to implement WFQ queuing discipline in Linux as a part of our deploma project. How to assign weight to each flow using ''tc'' commands.Then which will be the main queue. Thanks and Regards sheba

Hi all, As I read into the forum, NATting (SNAT) is expensive, using iptables to translate IP sucks the performance of the system. I just want to know if IProute2 can handle NATting and if it handels NATting can it performed faster than iptables? thanks, Wennie

Ok, the story is this, I''m running an Unreal Tournament 2004 server. It''s running on a system that has two external NICs that are connected to different ISPs. I would like players to be able to connect to the server from either link. My default gateway goes through NIC1. For traffic through NIC2 to work I simply added an extra routing table and rule. The extra routing table has

I''m trying to build a wan latency test environment, where packets from different "remote" locations get delayed by different amounts of time, depending on which remote location we''re pretending they are from. Currently, I''m doing this using the ''prio'' qdisc to obtain multiple bands, and hanging a different netem qdisc off each of the branches

what is the limit on the arp cache entires ?! Does someone have very big LANs with linux-routers ? How big ? (i mean flat L2 network, not segmented) I want to know how much can my net can scale ? thanx _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Guys Reading through my lartc mail, and thinking on how to tackle my next shaping solution, gave me an idea. I''d like to propose this idea for scrutiny and if it sounds viable I''ll definitely need to start developing in due time. For me in my day to day work with developing network application specifically geared for middle-tier ISP''s, and reading on other peoples

Guys I''m looking for some advice on the following situation: We''re serving a residential complex with internet, the network has grown and with it has the problems, below is a descriptive layout of our current setup: Connection: ADSL Down/Up speed: 512kbps/256kbps (1024kbps/256kbps in the near future) 2.0GHz Celeron D with 512MB RAM Current users: 140 Maximum amount of users:

Etx1 - First Internet Line - eth0 Ext2 - Second Internet line - eth2 LAN - Local Area Network - eth1 Other traffic - Ext1 -------+-------+--------------- Ext2 ---Web goes Here eth0 | |eth2 +-------+-------+ | ROUTER | +----+------+---+ |eth1 192.168.0.0/24 -----------------+ | 192.168.0.1/24------------------- - Gateway |