similar to: Multipath Routing in same subnet - Please take a look

Hi all iam trying to deploy loadbalance and failover My setup description --Fedora Core 4 --Linux 2.6.12.3 #1 SMP Mon Jul 25 22:37:34 IST 2005 i686 i686 i386 GNU/Linux --tc utility, iproute2-ss050314 --ip utility, iproute2-ss050314 --iptables v1.3.0 And i had deployed Following configuration #table main with priority 50, the highest one ip rule add prio 50 table main #table 201 ip rule add

I''ve applied julian''s paches to a 2.6.14 gentoo kernel with the appropiate options enabled, and i''m using a modified version of the mpath2.sh script also available on julian''s site http://www.ssi.bg/~ja/ Overall everything works nearly perfectly. Incomming connections to either the fios (PPPoE) connection, or cable modem get routed back out correctly. The

Ok folks, here goes.. I have been boggling with a problem for the past week, and still haven''t found a solution.. I''m trying to route traffic from two providers through a Linux machine. But that is not the problem. The ISP''s have provided me with a WAN IP class for both of the lines, to be routed into a DMZ where the machines a to respond to their respective

Hi all, After posting some emails here and googling in the net. I have now a little clarity where and how to start bandwidth Management. Hope I can still be guided though. My understanding is I will be needing these modules and linux utilities. I hope someone can confirm. 1. I need to use iptables/ebtables for packet marking. 2. I can use tc for packet shaping. 3. I can use bwm_ng for

Hi to all i think this is not a new problem for this forum....but its newest for me as i m a new linux lerner. Even if it is new plzz....reply me ur answer..n if its already asked n have solution..plzz forward the solution. My problem is here mentioned: I have fedora core 4 as a linux server. there r two external links connected to this. the settings are as: eth0 ->for internal (that is

Hi all, I have a similar question like many asked before I know but Please help as i cant figure out where the problem is and how should I tackle. I have 2 ISP connections. I want to share the bandwidth from both. I have copied the script from many places and created my own after changes. Problem is that only one connection is utilized at a time. Not both working. ratio of consuming

Here is a puzzle. I have a network with several servers. It''s a mess. It''s a /24 and pieces and servers are all over the place inside this /24 block, on both sides of the firewall. For example, the router at 1.2.3.1 is outside the firewall and many of the servers at 1.2.3.nnn/24 are behind the firewall. (Obviously, 1.2.3.nnn is a fudged network.) eth0 points outward to

http://www.linuxquestions.org/linux/answers/Networking/Spanning_Multiple_DSLs -- Thank you Indunil Jayasooriya _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Hello everybody I’m french and ‘im a network administrator. It the firs time I write on this mailing list .. I configure a debian distribution (the last one sarge) with iproute2 to route packets depending on source ip address It works fine but it is very very slow . When I make a ping for example on a windows machine : [in French ] $> ping www.Google.Fr Envoi

Although this SmartLink comes with a Linux program to monitor it, I'd rather use nut if possible. The biggest reason for preferring nut is that the supplied software forces one to set the On Battery time rather than allowing the battery to go critical and then sending a shutdown. Guessing how long the battery will last is problematical, especially as the battery ages. The other big reason

Hi, I have a little problem to setup iproute in my network It looks like this: ---- ----- ------ R1 R2 R3 ---- ----- ------ | | | | | | ------------------------------- ETH1 ETH2 ETH3 ETH0 ETH4 -------------> DMZ ------------------------------ | |

I have question about multipath routing. I am running a 2.6.7 kernel (gentoo). I have a route with three nexthops on the same interface. I see a different nexthop being picked for different destination addresses. All is fine. Now if one of the nexthop goes down (arp entry times out and arp request doesnt get a response), does it remove the nexthop from contention and only use the remaining two

hi i am doing my final year project on Traffic Shaping .could any one please guide me how do i actually go about it. i mean the first step.i have read the lartc documentation for the same. what do i do next.please help thanks in advance _________________________________________________________________ How good are you in a Formula One car? Play now

ok i gave up. can sb point me docs on how design proper qos rules ? about differences between them and the usage (which for wifi, which for ISPs which for homenet) ill read and do it -- *Dariusz ''tdi'' Dwornikowski | Gentoo | admin at pozman.pl | *[JID]:tdi@gentoo.pl|[gg]:2266034|[IRC]:#gentoo-pl@freenode | *[MAIL]:tdi@pozman.pl|[WWW]:www.tdi.pozman.pl |

Hi List, New subscriber/lartc user here. Have read the entire lar&tc howto, alexy''s ip_cref, etc. and must say, this makes iptables seem downright *easy*. I''m trying to build a three-legged linux router (WAN/LAN/DMZ) and have had it more or less working with iptables but would like to learn layer2 routing with iproute2. I have an adsl/29 network and would like my

Hi all :) there is somekind of strange Routing problem that im getting with Linux-2.6.16 and iproute 2.6.16 , when i use command like : ip route add default nexthop via 1.1.1.1 dev eth0 nexthop via 1.1.1.2 dev eth1 all packets goes on 1.1.1.2 ( always last interface ) , whats is the problem ? this situation also tested with equalize flag , on two physical interface and etc ... -- Lady Luck

Hi. I''ve trying to balance outgoing traffic by using multipath routes, but I can''t get it to work. Only one of the routes are used. I''m adding the route like this: ip route add table 101 default \ nexthop via X.X.X.X nexthop via Y.Y.Y.Y It shows up the routing table like this: default nexthop via X.X.X.X dev vlan110 weight 1

i´ve been searching for a load balance solution since a month ago... what i can say is that it simply doesn´t work. I was unable to find one guy that did it with sucess. When "load balance" is the subject of the message on the list, the message is simply ignored. So... if it doesn´t work... why LARTC don´t delete it from the HOW TO and answer us with some "it simply doesn´t

I hope this list is still active. I''m an experienced Linux Sysadmin, but I haven''t done much in the way of routing. Due to a decision made by my higherups, I need to jam a computer between my ISP and my LAN to do bandwidth throttling. My current setup: 1 Crappy Cable Modem (7Mb/768Kb connection) with a static IP. 4 servers (all have static, routable IPs) - One of which is

Hi all, I need to provide shell hosting for about 40 users, and few days ago I found the wondershaper script, so Im trying to know if this script could help me to improve interactive ssh/telnet connections. Wondershaper could help me or its only efective on OUTGOINGS requests? Ok, any comment and feedback will be welcome. Sorry for my bad english and THANKS in advance.