similar to: Spill over

Guys All the recent discussions recently, and the knowledge of a 2.6 port, of WRR has made me very keen on trying it. I had a look at the docs and examples know but my mind is not in a very receptive state. Take this simple example. Incoming internet connection of 1mbps. Shared between up to 25 users simultaneously. I know that WRR can fairly distribute the traffic amongst the currently

Hi! I am making some tests here, and i wanna miror all the traffic going to a ip from one interface to another ip. example: all packets going to 64.223.167.100 should be transmitted by ppp0 to internet and by eth2 to the adress 192.168.1.100. Someone know how can i do it using iptables or ip route/ip rule? Tks in advance! Fernando Favero _______________________________________________ LARTC

Guys Considering the festive season is upon us, thanks to everyone contributing to the list and helping all the readers with your great input! I don''t want to mention names, I''ll most certainly leave someone out. With this mail I''d like to test some theory on bandwidth management, with my own successes and failures during the past year. Sharing a link between 200

List Out of interest, I use transparent squid proxies for caching websites, and I shape the clients that browse the net, this all works perfectly so no questions in this regard... CLIENT <--- eth0 ----> SQUID <----- ppp0 -----> NET What I just realised was that all egress traffic on eth0 gets shaped, squid gets data from ppp0 and hence is not shaped. Does this mean that squid

Hope everyone had a festive easter weekend! Is it possible to monitor how much memory iptables or kernel consumes while processing packets as they go through the firewall? The same question goes for having a large number of routes in the routing table (>700). A few reasons for asking, but the two major ones are from the following situations: 1. We provide 420 flats in a complex with

netfilter and lartc members I just thought it''s time I contribute. I created this little script to help me while setting up iptables rules for firewalling, shaping or both. I hope this helps someone. Called tableview.sh, inspired by Table Mountain, Cape Town, ZA :) --- SOF ---- #!/bin/sh # ____ # /\/ \/\ # /__________\ # # Simple loop for keeping track of what is happening in

Hi all Is the EventMachine website (www.rubyeventmachine.com) down? I can''t access it from South Africa, and have tried using tor as well with no luck. I''m kinda new to EventMachine, so I first have a lot of examples to work through and reading to do before I start pestering the mailing list with questions. Thanks to everyone who partook in creating the library, so far

Hi. Why i receive this? this is not the first time i receive. "Your membership in the mailing list LARTC has been disabled due to excessive bounces The last bounce received from you was dated 29-Apr-2005." Can anybody tell me? Thanks a lot.! Marcelo

Hi, I am taking my machine loaded with Mandrake 10.0 and Suse 9.1 to my friend''s place. She has 2 different ISP providing pppoe connections in her office. She has allowed me try load balancing on my machine on Sunday. I just wanted to know does lartc stand good with pppoe? I have heard conflicting opinions on the same. I do not want to patch my kernel at all for it. Is it possible

Hi, I''m subscribed to this mailing list for a long time. During that time, I enjoyed reading all posts and try to understand them :) LARTC started as a something I could use to impress my boss. After a while it became clear to me that my boss was not impressed ;(, but I kept following this list because it was fun. I also placed a lot documentation online on

Hello Everybody, I have configured a Linux box that does traffic shaping. Its working wonderfully fine, just as expected...Now i want to measure the bandwidth consumed by each of my hosts....But I dont want SNMP to run on all the hosts[as required by MRTG] I used iptraf on my linux box, but it only measures the bandwidth on interface basis only.... I tried installing traffic-vis, its not working

Guys Given the replies and interests lately on the WRR scheduler, and the shameless promotion of Route Hat (only kidding), my question is simple. Is there an alternative for the 2.6.x kernels? >From what I gather WRR is only available for the 2.4 kernels... Regards -- Kenneth Kalmer kenneth.kalmer@gmail.com http://opensourcery.blogspot.com

Hi everyone Been spending the whole day on the wiki and in the list archives on using dovecot for POP3 mail. I'd like to present my findings and ask for some feedback. Our current software setup: * Courier-IMAP running POP3/IMAP * Postfix MTA * MySQL backend for user and login info As for the system layout, it looks like this: * NFS server which is the same server that houses single

Guys I''m looking for some advice on the following situation: We''re serving a residential complex with internet, the network has grown and with it has the problems, below is a descriptive layout of our current setup: Connection: ADSL Down/Up speed: 512kbps/256kbps (1024kbps/256kbps in the near future) 2.0GHz Celeron D with 512MB RAM Current users: 140 Maximum amount of users:

I heard something about execshield in some thread on OSnews.com. Does CentOS4 have an execshield compiled kernel? kind regards, Peter

Dear All, I''m using the kernel 2.6.6, iproute2-2.4.7.20020116, iptables v1.2.9, and gentoo. I have a leased-line 64 kbps. I can see the counter works in iptables, but in the htb, it doesn''t go to the right class (it always go to the default class). Any help will be appreciated here''s my htb conf #!/bin/bash tc qdisc del dev eth1 root tc qdisc add dev eth1 root

Guys After reading through the archives I found some insightful ways to be able to shape traffic to pppoe clients from the server. I have two questions on the topic of setting up a pppoe server however... 1. The clients will all be connected to each other using a normal ethernet network, the segments connected with managed switches. The capacity is roughly 500 nodes. Will these pppoe sessions

Hi, more than a month ago I proposed an addition to the HOWTO to address a certain packet classification problem/bug and how to fix it (see http://mailman.ds9a.nl/pipermail/lartc/2005q3/016728.html). I never received any reaction from the HOWTO maintainers, not even when addressing them directly (see mail below). Given that a month has gone by: Is the HOWTO currently unmaintained? Regards,

Yesterday I posted a question, but I guess too much detail is provided that no one would bother to read, so I rephrase the question and hopefully some one may be willing to read. Sorry to spam. I am using TEQL on two computers, each with two network interfaces. The two eth0 are connected directly, and the two eth1 are connected via a gateway (a linux machine). The problem is that when I send

Hi, I can''t get traffic shaping working. This is my situation: -------- ------ Net1 ----- |router| -------------------- | TC | ----------- Net2 -------- leased line ------ eth1 eth0 We use the leased line for normal traffic but also for synchronisation between 2 servers. The leased line is 2mbit. The synchronisation