similar to: multiple uplinks works on linux router but not on clients

Hello! I have set up a LINUX router with two seperate uplinks to do load balancing. I made all the configuration after the "NANO-HOWTO to use more than one independent Internet connection" document. I patched my 2.4.24 kernel with patches, described in this document. My configuration is: --------------------------------------------------------------- #!/bin/bash

Hi, I have a problem with my script. I have a debian with a kernel 2.6.8 patched with patch-2.6.8-ja1.diff of nano.txt site. I have 3 internet connections : - eth1 : - ip : 192.168.8.75 - gw : 192.168.8.73 - eth2 : - ip : 192.168.1.200 - gw : 192.168.1.2 - eth3 : - ip : 192.168.2.200 - gw : 192.168.2.1 and my eth0 for

Hello list, I want a set-up with a satellite link (eth0) and a cellular cdma link (ppp0) coming into a linux box with a LAN (eth1 or wlan0) to be able to route first through the satellite when it''s on, or else the cdma when it''s in range. Load sharing is not critical, but it would be nice. The satellite has a static IP, the cdma is dynamic. Both WANs are

Hello, I have finished setting up the load balancer with IPROUTE ... also patch the kernel to support DGD and now it''s working fine with the valuable guide at LARTC website, Julian Anastasov, and the kind people in this mailing list. Now I would like to launch a web server and a ftp server to the public but I''m stuck into a problem and really need your help. Currently internal

Hi! I had two uplinks till today. We stopped one of them today, so i thought i could share my experience. (it is maybe useful for somebody) I hadn''t managed to configure it using a LARTC howto, but the Nano-howto (http://www.ssi.bg/~ja/nano.txt) and julian''s kernel patches. I had some problems with icq connections, because it is a two step connection (It is just theory). 1.

Hi folks, i spent my whole day trying to set up my linux router using load balancing with multiple uplinks. I mainly focused on the nano howto, but somewhere I have a big mistake within my head. Basically the load-balancing is working, but not on a per-connection basis - just on a per packet basis. Practically this is not usable of course <g> But as far as I understood it should work..

hello, my name is Denny. I am new in this list. I am trying use multiple uplinks as describe in the lartc documentation (http://lartc.org/howto/lartc.rpdb.multiple-links.html) with squid transparent proxy in my gateway server. let me draw the configuration : /----------------- -----DSL1-----| \ |Transparent proxy |----Local network -----DSL2-----|

I have a private lan that is connected to the world via 3 dsl lines. I put up a linux box that handles all the dsl lines, lan gateway and all is working well...until...one of the dsl lines goes down. My routing table is: x.x.x.x dev ppp0 proto kernel scope link src x.x.x.x x.x.x.x dev ppp1 proto kernel scope link src x.x.x.x x.x.x.x dev ppp2 proto kernel scope link src x.x.x.x

Hello, I am trying something crazy here. I have gone through the old archives, lartc.org and lot''s of documentation, but still something is wrong. Here is the situation; The server is Fedora core 2 running kernel 2.6.5 I have 2 uplinks to two different ISP''s. (It will be 3-4 in the future). These ISP''s should serve the bandwith to local clients with multiple subnets.

Folks, Ive got two ISP connections that I am using with: --- ip route add 192.168.200.0/24 dev eth2 src 192.168.200.11 table connection1 ip route add default via 192.168.200.1 table connection1 ip route add x.175.244.0/24 dev eth1 src x.175.244.2 table connection2 ip route add default via x.175.244.1 table connection2 ip rule add from 192.168.200.11 table connection1 ip rule add from x.175.244.2

Been running this for quite a while and noticed that have intermittent problems getting out. Find that if I ping the same site from 2 computers it may work on one and fail on the other. Also was surprised that some time they are going out different interfaces at the same time. Seems to work all the time from the firewall. Running 2.6.10 kernel with the multipath routing patches on a debian

Hi all, I''m trying to put a linux GW running with this seput: Internet -> DSL Modem -> VLAN2 \ eth2.2 Linux > Lan eth2.3

Hello! I have access server with 4 uplinks (nice, huh?). I ran RedHat 7.3. Yesterday I did an upgrade to RedHat 9. After upgrade Linux says the third link is bad: # ip route show 2.2.2.0/30 dev eth2 scope link src 2.2.2.2 4.4.4.0/30 dev eth4 scope link src 4.4.4.4 3.3.3.0/29 dev eth3 scope link src 3.3.3.3 1.1.1.0/28 dev eth1 scope link src 1.1.1.1 10.1.1.0/24 dev eth0 scope link

Hi all, ive been using the nano howto to load balance to adsl links for a good while now ive got our live server running kernel 2.6.11.6 and these links work fine. i set up another server same model of machine and used the same kernel config ( wanted to try some tos stuff out) 2.6.11.6 but this one doesnt balance properly. what ever i put in table 222 (which is looked at from all sources) it

Sorry about this, but do any users have more detailed iax.cc information? Will they do trunking? What are the hosts that I will be logging into? I want to make sure that they will work well for me, and I would like to do some traceroutes to make sure that they are close! Thanks. -- Kristian Kielhofner

Hi everybody, Right now, we are blocking pings and traceroutes to our website. But, in order for our members to test the connection when they are experiencing slow browsing, we are thinking about unblocking them... Are there still any security issues (flooding, etc...) in enabling them or is that an old problem fixed a long time ago? Thanks, JD

Hi, I read the howto of iproute, I have the same case with HOWTO, the difference is that the whole incoming traffic goes through interface 0, the other difference is that I do not want to balance the out going traffic, because I have specific networks to take it throughout another interface. Mi Case IF1 --> Input and Output IF2 --> Only aoutput for three Network I need Help, How can I

Hi, I''m with a problem here on configuring our server to use multiple uplinks with different providers. The packet goes though on my way, but there is some lost packets that I don''t known where it''s going and causing my link to goes slow and stop sending/receiving data. Here i''m listing the route tables and the rules. It''s only for 1 IP.

provide me complete detail of your linux box like firewall script (iptables script), kernel''s .config file, multigatway file (i.e. /sbin/ip ....... commands file) so i can check and try to resolve your issue. sonu.... --------------------------------- Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail Beta. _______________________________________________ LARTC

Hi, I configured a router box to use 2 providers, as described in the HOWTO. (Apendix 1) I want to use both links to reach a single smtp server. As I read in the kptd and in some old messages of this list, doing a SNAT in the postrouting chain comes _after_ the routing desision. So I guess the following lines I''m trying to use are wrong. (See Apendix 1) What can I do to have multiple