similar to: Several basic doubts

Can anyone help us... We're Samba ist Timers... We're trying out a Linux machine as a feasability study. We're running a copy of SuSE 6.1 Linux on a DX4/100 and trying to get Samba up asd running. As far as I can tell it's all ok, but I can't ping anything from the Linux box and Win95 / NT workstation can't see Linux. The DX4 has a 3Com509B NIC, and as for as I can tell

I copied and tried to adapt to my necessities the excellent script of Pedro Larroy, but I am inexperienced in QoS and I have doubts. I have cablemodem to Internet 1024kbit down and 256kbit up, through eth0. The LAN has eth1 and NAT. I formed the band so that shaping goes by the eth1 (of the LAN) with bandwidth maximum CEIL=768. But I observe that the traffic sometimes accelerates and other

Hello all, I am with a doubt about QoS solution... I have a 4 Mbit backbone coming from the telco I use... This is the link I serve to my clients, so I make this classes: $TC qdisc add dev $DL root handle 1: htb default 60 CLASS="/sbin/tc class add dev $DL parent" $CLASS 1: classid 1:1 htb rate 4096Kbit $CLASS 1:1 classid 1:10 htb rate 256Kbit ceil 3072Kbit burst 15k $CLASS 1:1

I am trying to generate a set of random numbers that fulfill the following constraints: X1 + X2 + X3 + X4 = 1 aX1 + bX2 + cX3 + dX4 = n where a, b, c, d, and n are known. Any function to do this? Thanks, -Ala' [[alternative HTML version deleted]]

hello i have slackware installed and i have two internet connections , ADSL(2,5mbps) + CableModem(1mbps) i want to share the connections in a small network NAT for the ADSL connection, and a proxy server for the cablemodem connection i searched all over the internet (probably not where i was supposed to) but i could''n find a solution if someone could give me a tip i would really

I am trying to build a firewall and from my reading of the list archives and other places, I''m worried about unintended interactions between iptables and iproute2. Here is my situation I have an internal network on eth0 and two separate dmzs on eth1 and eth2 respectively (a wireless network and a kiosk). On the outbound side, I have a cablemodem provider and a dsl provider. What I

Hello: Is it possible to run SAMBA over IPX/NetBeui? (I will thank any suggestion) I hava an small LAN of 3 computers, connected to the Internet through a Cable-modem with DHCP (the cablemodem and the computers are all connected to a hub). The CableModem assigns every computer a random public IP adress, but usually from diferent range (ie: 212.78.x.x, 62.57.x.x, etc), so I cannot get SAMBA or

I would benefit from IPX support in both Samba and smbfs. I subscribe to Road Runner, a cablemodem service run by Time Warner Cable. The cablemodem hooks up to an ethernet hub. The ethernet hub is hooked to three computers. One of those computers runs Windows 98. The other two can dual boot between Windows 98 and Linux. TCP/IP works perfectly on all the computers, in both Win98 and Linux

I have a situation where I'd like to be able to have icecast reach out to another icecast server as a client. Is this possible with relaying? From what I read relaying and master relaying both have the server reach out to another server. The reason is this. I have a hardware encoder (Telos audioactive) sitting on a cablemodem. I have a remote provider (streamcheap or something) set to

Hi All, I did a clean install of CentOS 5.3 yesterday. During setup I activated both adapters on startup. etho is my public IP and eth1 is my private/internal IP. It did not let me specify nameservers though. So I know this is resolv.conf. I know I put in: nameserver xxx.xxx.xxx.xxx nameserver xxx.xxx.xxx.xxx But how do I put in nameservers for specific networks? Example, I want my

While troubleshooting my MultiISP box, I suspect I might have found either a bug or an incompatibility with CentOS 5.2. In prog.header (function detect_dynamic_gateway), Shorewall tries to look for: /var/lib/dhcp/dhclient-${1}.lease However (at least under CentOS 5 - unknown about other OSes), this should be: /var/lib/dhclient/dhclient-${1}.leases (different path, and "leases"

It is working very good :) Thank You. I only need to write Interface etho in maclist file. My MAC addresses don''t neet the ~ in front of. Thanks ! Maciek -- ---- Oferta jakiej jeszcze nie by³o! Serwer www 60 MB za 99 z³ rocznie Szczegó³y: www.oferta.alpha.pl ----

Hey, I have such a script: tc qdisc add dev $DEV root handle 1:0 htb default 21 r2q 2 tc class add dev $DEV parent 1:0 classid 1:11 htb rate 100mbit tc class add dev $DEV parent 1:11 classid 1:21 htb rate 512kbit ceil 512kbit tc class add dev $DEV parent 1:11 classid 1:23 htb rate 1024kbit ceil 1024kbit tc class add dev $DEV parent 1:11 classid 1:25 htb rate 3072kbit

The nbdkit tests take a long time to run especially on armv7. To try to get an idea of which tests take the most time, and since I happen to have a qemu aarch64 *TCG* guest available, I ran the tests on that guest. A TCG guest is about the worst case for libguestfs, used by some tests, since it uses double-nested TCG, and as you can see below there are tests taking over 6 hours. In fact I

Hi all. Here''s the situation Linux box with eth0 connected to LAN, and eth1 connected to internet via cablemodem. Connected to the lan are some voip devices, ive configured htb in eth1 to save some bandwith for the voip devices. Now i have another issue, at some hours of the days, some servers in the lan downloads data from other servers in internet and they use all bandwith available.

Hi all, I have read the larc howto and I need to apply a traffic shaper with this configuration: router / two interface etho and eth1 lan lan is on eth1 and on eth0 I''ve the dsl connection (1.2 Mbit / 256 kbit) I need to limit the bandwith towards lan and I''ve thought at HTB and tcng. I write the script belove. I want limit the p2p and ftp (ssh and irc) connection at 15

Hello everybody on the list, I have the following situation where I want to police the speed of incoming packets from specific subnets to 1024kbps and then police all the rest to 256kbps, which is the speed my ISP grants for the rest of the internet. So, eth1 is the one connected to the cable modem and then to the internet. I do: tc qdisc add dev eth1 ingress handle ffff: then: tc filter

On Wed, February 18, 2015 13:07, Les Mikesell wrote: > On Wed, Feb 18, 2015 at 11:39 AM, James B. Byrne > <byrnejb at harte-lyne.ca> wrote: >> 2. How does one configure the routing table on network startup to >> specifically detail the route particular addresses are supposed to >> take? >> > > Not exactly sure how routing works with aliases on the same

Hello, I want only a very simple thing, but I have been unable to get it working so far. I would like to shape my DC++ traffic firmly to certain speeds. I am using an embedded linux router (asus wl500g), and a NATed PC (address 192.168.1.100). eth1 is a WAN interface and br0 is the LAN interface of the router.DC++ client is running on 4111 ports(tcp and udp) I actually managed to shape download