similar to: wonder-shaper

Dear members, I am trying to share the bandwith for all users fairly. because some users heavily uses p2p programs and a few hosts consume most of bandwith. when we limit each flow it does not work as one client has many connection at same time. Firstly I tried to write a script that use the ipfm(which accounts traffic usage) logs as follow .extract ip addresses heavy bandwith users from

Hello, I''m looking how (if) can I solve the following problem using HTB and iproute2: I need to assing the same bandwidth limit to every client, but the problem is that clients will be random - i.e. I know niether number of clients no IP or MAC addresses. If anybody knows FreeBSD''s ipfw2 - I''m looking for something like "ipfw pipe 150 config mask dst-ip 0xffffffff

Guys Reading through my lartc mail, and thinking on how to tackle my next shaping solution, gave me an idea. I''d like to propose this idea for scrutiny and if it sounds viable I''ll definitely need to start developing in due time. For me in my day to day work with developing network application specifically geared for middle-tier ISP''s, and reading on other peoples

Hi, How can I set equal bandwidth of 512kbit downlink and 256kbit uplink for every single IP address of 254 IP addresses I have in my LAN? Regards, ro0ot

Guys I''m looking for some advice on the following situation: We''re serving a residential complex with internet, the network has grown and with it has the problems, below is a descriptive layout of our current setup: Connection: ADSL Down/Up speed: 512kbps/256kbps (1024kbps/256kbps in the near future) 2.0GHz Celeron D with 512MB RAM Current users: 140 Maximum amount of users:

i''am new here and i saw some tutorials but those was old for the 2.4.xkernel and i don''t know were to start correctly. many thanks to all of you. sincerly: Timi _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Guys Considering the festive season is upon us, thanks to everyone contributing to the list and helping all the readers with your great input! I don''t want to mention names, I''ll most certainly leave someone out. With this mail I''d like to test some theory on bandwidth management, with my own successes and failures during the past year. Sharing a link between 200

Hi all, Here''s the situation. I have 80 users sharing a internet link of 5Mb link. The users are grouped in /29 ip addr classes so I have 10 classes of users I want to create a root htb, then 10 htb childs each with 0.5Mb bandwidth. The traffic will be directed to each class using tc filters. Now, I want that each of 8 users from each class to share equally the class bandwidth. Can I

Hi, I want to see bandwidth every ip address in the local network that passing my linux gateway in the console, may be it''s similar like mrtg (web based version) It''s possible ? Best regards, >--<Kristiadi Himawan>--<

Hello, we are using HTB for dividing 15 Mb/s upload rate to 1022 classes (rate 14 kb/s, ceil 15 Mb/s), but sometimes ksoftirqd_CPU0 uses the most of the CPU-time (over 90% CPU load is casual in such situation). This situation occurs several times a week and takes minutes or one hour and during that time it has enormous packet loss. Reboot of the machine usually solves this problem. Because

Hi folks, So, I have a pretty simple setup - a linux router machine running as a firewall/router for a small neighborhood LAN (approx 20 machines). I also have squid running on the box in non-transparent mode, and also I have set up NAT for TCP/UDP ports above 1024 for all clients and SSH/POP/SMTP/CVS NAT''d for selected ones based on MAC filtering. No hosts whatsoever can access ports 80

Hi everybody. I have a dilema and I think you guys can help me out. I am trying to shape the bandwith for about 500 clients, and I want the bandwith to be alocated dynamicly. Lets say I have 4 MB bandwith. I give each ip (500 IP''s) a sustained rate of 4 KB/sec . I wonder if I can shape the bandwith so when for example only 100 clients are online, to give them a rate of 4MB/100. How can

I am working on traffic shaping using the nextenso proxy platform(a product of alcatel)on linux platform, I wish to do dynamic traffic shaping means on a fly, is that possible with TCNG?? With Warm Regards, Aruna Baghel "Gratitude can transform common days into thanksgivings, turn routine jobs into joy, and change ordinary opportunities into blessings."

Hi, at my local university network, I have to make sure no student uploads more than x GB/day. So far, I give them unlimited bandwidth until they have more than y GB (y<x) upload. After that, I use the u32 filter to associate the affected IP address with a HTB class limited to the rate (remainingtraffic/remainingtime). Since the accounting is done with ipt_ACCOUNT right now and the netfilter

Hi All, I''ve just installed WRR and am looking at tools to monitor, graph and display the system and throughput of each queue/class/filter. I''ve looked at: iptraf - only shows tcp/udp flows, not QOS queue throughputs show.pl - doesnt work with WRR (as far as I can tell) tc-graph.pl - doesnt work with WRR (as far as I can tell) polltc_ - doesnt work with WRR (as far as I can

Guys All the recent discussions recently, and the knowledge of a 2.6 port, of WRR has made me very keen on trying it. I had a look at the docs and examples know but my mind is not in a very receptive state. Take this simple example. Incoming internet connection of 1mbps. Shared between up to 25 users simultaneously. I know that WRR can fairly distribute the traffic amongst the currently

Greetings, My question deals with the htb version of wonder shaper. I used it for some time without much alteration except I noticed something odd in the way the rates are set up for the 3 htb classes. The way I understand it, there are 3 classes: 1:10 - high prio class with rate ${UPLINK}kbit 1:20 - bulk/default class with rate $[9*$UPLINK/10]kbit 1:30 - bulk/default low priority

Hi all As part of may project i wants to implement the WFQ in linux, at present upto my knowledge there is no such implementation in linux. The only mannual i got from "Csaba Toth", He explained the tc command so i hope that is in linux also. DID any one know about it, Please infome me about it also, Thanks for all regards ********* *Sunil* *********

I would like to implement WFQ queuing discipline in Linux as a part of our deploma project. How to assign weight to each flow using ''tc'' commands.Then which will be the main queue. Thanks and Regards sheba

Hi folks. This message may be a bit verbose and not as techie as the ones I''ve seen in this list, but describing the scenario will save a lot of messages. Scenario: A building with 17 floors, each floor with 24 offices (totals 408 offices) connected to the backbone through a border switch (1 vlan for each office). The offices can lease bandwidth of 64k, 128k, 256k, 512k, 1M and 2Mbps,