similar to: is it possible?

http://barakas.servebeer.com/stuff/tc_htb.txt

Hello LARTC, Internet connection - ADSL, interface nas0 (115kbit guarantied, up to 1mbit possible. Depends on ISP load, impossible to guess). Internal interface LAN, eth0. Is it possible to successfully shape download traffic on eth0 using HTB? Classes must have guarantied rate calculated from 115kbit possible rate (for example 3 classes) and the possibility to borrow up to 1mbit (depends on ISP

Hello, I know that there are devices which are not working with arp. For example, the loopback device. I was wondering whether it is possible to create neighbours in a NUD_NOARP state; so that "ip neigh show" will show such neighbours where their state is NUD_ARP. I made some tests with the loopback device , but could not find such a way to cause it to appear as NUD_NOARP. Also if I

Hello All, I have a linux box running with three NIC''s, I have used brctl tool to configure this box as a bridge, i have given it ONE logical ipaddres, Every thing is working fine, but now i am required to configure the same bridge as a LOAD BALANCER.... On some googling i found the following link http://lartc.org/howto/lartc.rpdb.multiple-links.html This HOWTO requires me to have one

Hello, Is routing within the same network possible? If it is, what configuration should I put for the firewall/router shown below? I basically want the host debian13 to be able to send packets via a multi-homed firewall. I think the multi-homed firewall involve some routing. +-------------------+ |debian13 | |eth0:192.168.0.13 | +-------------------+ |eth0 |

I wonder if PuppetLabs will work with Amazon to try to add Puppet as an option to OpsWorks as well ? I don''t think people using Puppet with AWS in a stable fashion would try to move to OpsWorks and migrate everything to Chef, but new customers/startups would think twice in choosing Puppet if the service offered in AWS OpsWorks is based on Chef. I haven''t tried OpsWorks yet,

Hi all, Given below ia the simple network diagram. I need to control uplink for the individual private network IPs as depicted in the diagram. Is this possible in a NATed environment using CBQ or HTB. I learnt that we can control only outgoing traffic. So if I control in the eth1 interface the source IP will be masqueraded, and it may not result in the desired behaviour. Is there a solution to

Hello lartc, I''ve made a script for shaping a network with about 3000+ users using hashing tables and everything seems to go down well, i''ve been testing it (for about 10 mins and it''s doing the job, matching filters and so on. It counts about 5000+ filters on eth1 (limit download) and about the same on eth0 (upload). The actual

Hi people I''m new to the mailing list, but I''ll save my presentation to another mail as I already have some strong questions. Now I just faced this mail that arose me a question I had when "installing" my qos. > Internet connection - ADSL, interface nas0 (115kbit guarantied, up to 1mbit possible. Depends on ISP load, impossible to guess). > Internal interface

Hi Leo, here's a suggestion: in your dialplan (extensions.conf) send multiple users to the same mailbox (e.g. 999) if they do not pick up within 30 seconds: ; SIP Phone 100, Tom exten => 100,1,Dial(SIP/100,30) exten => 100,2,VoiceMail(999) ; SIP Phone 200, Eric exten => 200,1,Dial(SIP/200,30) exten => 200,2,VoiceMail(999) and in your voicemail.conf you do not specify a single

Hello All, I was curious to know if I can do traffic shaping on abonded Interface? Ex: I have to interfaces eth1 and eth2 which i have bonded together as bond0 , now the question is can I do shaping on eth1 and eth2 ?? Thanks KartheeK --------------------------------- Here''s a new way to find what you''re looking for - Yahoo! Answers Send FREE SMS to your

Hello to everyone, Here is the situation: [LAN1]---[eth3]/----------\ | LinuxBR |[eth2]---[LAN0]---[linuxGW]---[internet] [LAN2]---[eth4]\----------/ Whole LAN is in subnet 10.0.0.0/24. So I need: LAN0, LAN1, LAN2 could not see each other. LAN0, LAN1, LAN2 is in same subnet (10.0.0.0/24). All LANs have to get only internet. How can I configure LinuxBR to do so?

I have some filters.. like this: $TC filter add dev $dev_isp protocol ip parent 3:0 pref 3 u32 match ip protocol 6 0xff match ip sport $prt 0xffff flowid 3:2 I throw only few types of packets to 3:2, all other traffic I want to put on 3:3, but this doesn''t work(!): $TC filter add dev $dev_isp protocol ip parent 3:0 pref 4 flowid 3:2 When type that command I have this: Unknown filter

Hello there, I'm a new Asterisk user and I wonder if it is possible to associate a voicemail box with a group of users, i.e., a single recorded message is sent to everyone in that group. If so, where can I find more information about that? Thanks in advance, Leo Burd

Is it possible to make GPO changes from the server (i.e. without using Windows) ? I would like to include some configuration in my build-out script and wonder if it is possible. Specifically, I am trying to provide a logon script. Here's what I know. 1. I can identify the correct GPO GUID object using "samba-tool gpo listall" or with something like this $ ldbsearch -H

Hello, I''m new to the list and iproute2 itself. I was searching for a way to simultaneously use several IPs on the *same network interface* for outbound traffic. Let me explain: I have eth0 interface to which I set 2 IP addresses; 192.168.0.1 and 192.168.0.2. Then I want to connect to Internet through 192.168.0.254 gateway using round-robin between those 2 addresses. The iproute2

Is it possible to negate the "match" to the ip? I want to match all traffic to dport 80 NOT going to dst 1.2.3.4: $TC filter add dev ${DEV_IFB} parent 1:0 prio 2 protocol ip u32 \ match ip protocol 0x6 0xff \ match ip dport 80 0xffff \ match ip dst 1.2.3.4/32 \ classid 1:14 I can''t find it in the docs. I tried "!" "\!" and "not" in several

hello . i have no problem shaping incoming traffic from WAN how do i shape outgoing traffic to WAN depending on the speed limit of each subnet .... ex: 10.10.6.0 --> 512kbps (DOWNLOAD / UPLOAD) 10.10.5.0 --> 256kbps (DOWNLOAD / UPLOAD) do i have to used forward handle, and used iptables -s 10.10.6.0/24 -d WAN -j MARK --set-mark 101 and used iptables -s 10.10.5.0/24 -d WAN -j MARK

I am working on traffic shaping using the nextenso proxy platform(a product of alcatel)on linux platform, I wish to do dynamic traffic shaping means on a fly, is that possible with TCNG?? With Warm Regards, Aruna Baghel "Gratitude can transform common days into thanksgivings, turn routine jobs into joy, and change ordinary opportunities into blessings."

Hello, I wonder if I can write a test that runs only on Linux. I was thinking of adding “REQUIRES” to the test, but couldn’t find a feature name for Linux (if one exists). Thanks! Best, Taewook -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20170303/807b40ac/attachment-0001.html>