similar to: Transfer speed exceeding the ceil

A bit more detail. I have the following htb classes set up... class htb 1:356 parent 1:4 leaf 356: prio 4 quantum 1600 rate 12800bit ceil 51680bit burst 15Kb/8 mpu 0b overhead 0b cburst 1663b/8 mpu 0b overhead 0b level 0 class htb 1:357 parent 1:4 leaf 357: prio 4 quantum 1600 rate 12800bit ceil 51680bit burst 15Kb/8 mpu 0b overhead 0b cburst 1663b/8 mpu 0b overhead 0b level 0 class htb 1:2 root

What''s going on here? I''m spewing UDP traffic at this thing, and it is exceeding the ceil, (i watched it for a few minutes, it didn''t slow down). Anyone know how to fix this? class htb 1:613 parent 1:5 leaf 613: prio 6 quantum 2560 rate 20480bit ceil 103360bit burst 15Kb/8 mpu 0b overhead 0b cburst 1728b/8 mpu 0b overhead 0b level 0 Sent 16591370 bytes 4159 pkt (dropped

Hi Guys, I want to create multiple virtual interfaces on a system running linux 2.6. The main requirment being, to assign unique MAC address fo each of the virtual interfaces. I need to know, if this is possible and will really appriciate if someone can provide me pointer in this direction. Thanks a lot. R. Singh _______________________________________________ LARTC mailing list

Hi, Does anyone tried to get ipip or gre tunnel behind NAT environments. ? i''m trying to make both side tunneling with ipip or gre with private address just like belows.. A -------------------FIRWWAL -------------------INET ------------------- B PRIVATE PUBLIC PUBLIC (10.100.0.1) (211.xxx.xxx.xxx) (

I''m using a fairly large number of classes, andf borrowing is not working as expected... I''ve called this setting it up on an IMQ device with speed 1200/256 on a 1536/384 line. I''m then throwing a UDP data transfer at it that gets tossed in one of the class under parent 1:6. The classification is working fine, but when I try to ping out, ping times are in the 900ms

Hi, I have a box set up to distribute load over 4 satellite connections. I cannot use Instant Messenger programs with it as it stands, I believe that using iproute2, the path to the server is not being locked to one interface, so the IM servers are getting user traffic from multiple IPs. When I set just one default gateway, IMs work great. When I use the scope global/nexthop method of load

Hi, I have the my gateway with load balancing traffic going out over two providers. Web browsing is fine...working great. But, my clients (office staff) complains that MSN keeps disconnecting (in 5 mins). Why? Please help me... Regards, ro0ot

https://bugzilla.mindrot.org/show_bug.cgi?id=1513 Summary: CIDR address/masklen matching support for permitopen= Product: Portable OpenSSH Version: 5.1p1 Platform: All OS/Version: All Status: NEW Severity: enhancement Priority: P2 Component: sshd AssignedTo: unassigned-bugs at mindrot.org

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have a linux system with 4 ethernet interfaces, eth0 goes to the internet, eth1, eth2, and eth3 are NAT''d LANs. I want to use an ingress filter to prioritize bandwidth (downstream from internet) to various IPs. I want to sett it up something like this.... eth0 <--[NAT]--> dummy0 <---> dummy1 <---> eth1,eth2,eth3 dummy1

In this simple htb setup: # tc -s -d class ls dev eth0 class htb 1:1 root rate 300000bit ceil 300000bit burst 1749b/8 mpu 0b overhead 0b cburst 1749b/8 mpu 0b overhead 0b level 7 Sent 13171835 bytes 13169 pkt (dropped 0, overlimits 0 requeues 0) rate 45848bit 10pps backlog 0b 0p requeues 0 lended: 5272 borrowed: 0 giants: 0 tokens: -84429 ctokens: -84429 class htb 1:2 parent 1:1 prio 0

Hi all, I have been getting some strange results with HTB in kernel 2.6.11, and was wondering if anybody could give me some advice. Also, if someone could direct me to the changelog for the recent versions so I can see if it is worth upgrading? Anyway, the problem can best be summed up by looking at the output of ''tc -s -d class show dev eth0''. Some of the relevant results

After varying degrees of success with p2p detection modules, I would like to write the following rules using iptables to reliably identify p2p traffic: 1. If a host on the network has 5 or more simutaneous tcp connections to ports above 1024, mark all connections to ports 1024 and above as 60. 2. If a host has received (or sent) UDP packets from 5 different hosts'' ports above 1024 in a

Hi, I just installed Redhat AS 2.1 on a a new machine with tons of RAID5 space. During the install, I created the partition/filesystem /largedisk with 550784264 blocks. After everything is installed and mounted, I get the following in a df: /dev/sda8 550784264 32828 522773144 1% /largedisk The avail + used != total, not even close. I realize that the 32828 is probably the

Dear Sirs, I need to make a backup of email accounts (Maildir) a Linux server to a Windows server with NTFS, but get the following error: rsync: rename "/mnt/rsync/cur/137D94_29.ml110c.qnet.com.pe,S=32828:2,S.M92y5w" -> "cur/137D94_29.ml110c.qnet.com.pe,S=32828:2,S": Invalid argument (22) I have installed Rsync v3.0.9 The command is executed: rsync -rltDvu

Hi all! I''m working in a " _really_ end user simple", yet powerfull, flexible, scalable, GPL htb/htb-init front end, but now, in the "test fase" im facing an utlimate problem... Absoult minimalistic scenario: #Use a FIXEDFONT to read this #inet-ethx-|FIREWALL|-lan-ethx <-> |client_host_1| # #FIREWALL class(rate,ceil) at lan-ethx

Any ideas on this warning? If I call this number, sometimes I get this error and sometimes the call goes thru fine. Why would it work sometimes? -- Executing Goto("SIP/3044-8d49", "cytel-outgoing|915124512424|1") in new stack -- Goto (cytel-outgoing,915124512424,1) -- Executing SetCIDNum("SIP/3044-8d49", "2814494000") in new stack --

An earlier exchange about someone seeing the rate larger than the ceiling is posted below. Andy explained the reason for the "above ceiling" rate in Daniel''s output . . . but I just saw an example that doesn''t fit. >> tc output >> class htb 1:14 parent 1:1 leaf 14: prio 1 quantum 3072 rate 256000bit ceil 282000bit burst 1820b/8 mpu 0b overhead 0b

Dear Marc. Thanks =) Already have dovecot-solr installed. Is there a way to see if dovecot-solr is actually working? Thanks Kevin On Fri, Jan 23, 2015 at 2:42 PM, Marc St?rmer <mail at marc-stuermer.de> wrote: > > Zitat von Kevin Laurie <superinterstellar at gmail.com>: > > Hello, >> >> I need to recompile dovecot on ubuntu 14.04 >> What would be

I am trying to setup vinum on a box using 4.8 RELENG_4 (as of about a week ago snapshot). This box was running 4.6 /w vinum on same hard drives for the last 4 months wonderfully... but since it is my current 'scratch/backup' box, I just reinstalled with -STABLE. # uname -a FreeBSD polya.axista.com 4.8-STABLE FreeBSD 4.8-STABLE #22: Tue Jun 24 17:01:07 EDT 2003

On 22 May 2013 16:14, Eric Christopher <echristo at gmail.com> wrote: > Hi All, > > I fear starting another centi-thread on this but I'll give it a shot. > > We're currently supporting two build systems which is definitely one > more than we (or I) want to support. > > I don't know of any support in autoconf past the > --host/--build/--target case