it is not possible to use dummy,
mut you can use imq which was made exactly for this purpose.
http://pupa.da.ru/imq/
----- Original Message -----
From: "Ryan Castellucci" <u52firw02@sneakemail.com>
To: <lartc@mailman.ds9a.nl>
Sent: Monday, April 05, 2004 2:34 AM
Subject: [LARTC] Routing through dummy interfaces?
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I have a linux system with 4 ethernet interfaces, eth0 goes to the internet,
eth1, eth2, and eth3 are NAT''d LANs.
I want to use an ingress filter to prioritize bandwidth
(downstream from internet) to various IPs.
I want to sett it up something like this....
eth0 <--[NAT]--> dummy0 <---> dummy1 <---> eth1,eth2,eth3
dummy1 should have an ingress filter on it controling outbound bandwidth
to the internet
dummy0 should have an ingress filter on it controling inbound bandwidth
from the internet
Let''s say...
eth0 is 10.53.62.2/30
dummy0 is 192.168.255.1/24
dummy1 is 192.168.255.254/24
eth1 is 192.168.1.1/24
eth2 is 192.168.2.1/24
eth3 is 192.168.3.1/24
How do I set up routing so traffic to/from the internet gets routed
through the dummy interfaces?
If this is not possible, how might i achive a simmilar effect?
- --
Any mail sent to the address this message was posted from will be bounced.
PGP/GPG Fingerprint: 3B30 C6BE B1C6 9526 7A90 34E7 11DF 44F3 7217 7BC7
On pgp.mit.edu, import with `gpg --keyserver pgp.mit.edu --recv-key
72177BC7`
Also available at http://www.cal.net/~ryan/ryan_at_mother_dot_com.asc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)
iD8DBQFAcJt7Ed9E83IXe8cRAmDhAJkBGUOBWjWU9j1+i3Umf/ahQroGvQCfb4a3
9jHTZdXlv1mrGyRc+m29KFQ=b/
-----END PGP SIGNATURE-----
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/