similar to: Open Source Project "Q*Box" Launched

Hi all, I need to provide shell hosting for about 40 users, and few days ago I found the wondershaper script, so Im trying to know if this script could help me to improve interactive ssh/telnet connections. Wondershaper could help me or its only efective on OUTGOINGS requests? Ok, any comment and feedback will be welcome. Sorry for my bad english and THANKS in advance.

Hi all, please, tell me about security of Darkstat. Is it good idea to install it on firewall/gateway ? I'd like to measure our company traffic, but I do not have Apache running on the gateway. How could I redirect Darkstat's output to web-server inside company ? Or is there some other tool, which can measure in/out traffic and send output to another machine ? I know MRTG, but it uses

I have a very simple setup exactly as described in the HOWTO section " 4.2. Routing for multiple uplinks/providers". One is cable (eth1: dhcp) and the other is PPPoE (ppp0). I used the following commands to configure the routing once all of my interfaces are up and i have configured SNATing for them: ip route add 66.11.173.0/24 dev ppp0 src 66.11.173.224 table 11 ip route add default

Is there an other place than www.docum.org where one could get monitor_tc.pl? Docum.org seems to be down. Peter -- The bogosity meter just pegged.

Hi, I'm helping out with a political campaign and would like to use asterisk to blast out about 200,000 calls with a short message from the candidate. Provider: I'm thinking voipjet may be a good solution? Hardware setup: I will have access to several T-1 lines so I would just want to set up the dialers to limit the number of concurrent calls and so forth. I found teleyapper on

>>> >>last OS I can think of with an actual Bourne shell was Solaris. >>> >> >>> >> >> > >> >The various *BSD's have & use the actual Bourne shell .... >> > >> > > Which one? All the BSDs I know of use the Almquist Shell except for > OpenBSD which uses a patched version of the Public Domain Korn Shell

Once upon a time, JJB <jack at internetguy.net> said: > Interesting. Back in 1980 we called /bin/sh the Mashey shell. It > did not have command substitution or other things we now take for > granted. Bourne did that for us. So there's a version or two > missing in history... Check the history here: https://github.com/dspinellis/unix-history-repo -- Chris Adams

Hi, Has anyone used TC in a wireless environment, which is dynamic. I understand that the parameters for queuing are static and cannot be changed unless the queuing discipline is deleted and reloaded with different parameters. If anyone can share any experience, that would be helpful. Thanx. Azim. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl

Hi all, I am writing a simple shopping cart which will consist of a single class. There will be no DB table for carts so I do not want to make my Cart a model. But where do I place my Cart class so that I can access it in my controllers? I want to be able do do things like this (for instance in a shop controller): def add_to_cart @session[''cart''].add(article_id, amount)

I'm trying to get MRTG up and running on CentOS, but the displayed http page says that I don't have permission to access /mrtg/ on the server. Here are my commands yum install mrtg vim /etc/httpd/conf.d/mrtg.conf /etc/init.d/httpd restart cfgmaker --global 'WorkDir: /var/www/mrtg' --global 'Options[_]: bits,growright' --output /etc/mrtg/mrtg.cfg public at 10.200.200.1

Hi All, After reading the sparse info and attempting to get this running, I'm unsuccessful and could use some guidance. I already have a MRTG server up and running serving hundreds of router interface graphs. I would like to add SIP/IAX channel graphs for all our asterisk servers. I'm running asterisk 1.2 and MRTG 2.4.17. I tried the script from http://karlsbakk.net/asterisk/ but get

Mark LaPierre <marklapier at ...> writes: > > On 02/15/15 22:48, Mark LaPierre wrote: > > Hey Y'all, > > > > I though I would resurrect a long dead mail chain. > > > > I'm looking for a good replacement for Rhythmbox. I need a pod catcher > > to catch podcasts and download them to my HD where I can then move them > > onto my mp3

I have created shell script for MRTG statistics of droped/rejected packets: ftp://slovakia.shorewall.net/mirror/shorewall/mrtg/ http://slovakia.shorewall.net/pub/shorewall/mrtg/ rsync://slovakia.shorewall.net/shorewall/mrtg/ example: http://slovakia.shorewall.net/pub/shorewall/mrtg/example/ It is not based on /var/log/messages (syslog), but iptables counter. A lot of packets are droped/rejected

Hi all. I am having an issue and quite frankly would rather not spend the entire next two days learning the entire snmp program. I am hoping someone out there has used MRTG and SNMP to make it work. I have both installed. Single server, polling itself. Question 1- does snmpd have to run as a daemon, or only run once so I can get OID and MIBs from it? Question 2- does anyone know the command

If you have a working proxyARP setup, will you please post it? I''ve tried to insert a Linux box between the DSL connection and the switch, but I''m getting nowhere. Everything works correctly when all the servers in this network use the switch to get to the DSL. Any box directly connected to the DSL also works correctly. http://www.sjdjweis.com/linux/proxyarp/ makes it sound

Hi! I answer to two messages from this thread (I use digest). lartc-request@mailman.ds9a.nl wrote: > > Message: 3 > Date: Fri, 16 Jul 2004 10:51:37 -0700 (PDT) > From: ibro tj <ibb_linux@yahoo.com> > Subject: Re: [LARTC] QoS for Voip. > To: lartc@mailman.ds9a.nl, alessandro.ren@opservices.com.br > > Hi, > > the hint from Martin A Brown which I am

I have the following situation: Asterisk 1.2.1 25+ Polycom 501 telephones. Bootrom 2.6.2.0032 Application 1.6.2.0041 Some 501's local to my network, some across the great INTERNET divide. PRI connected to Sangoma card. Issue: horrible echo (and squeals, and "underwater-like" sound) on speaker phone when calling from extension to extension. echo not present when calling outbound

Hi guys, I'm using Centos 3.5 with Apache-2.0.46. i linke my mrtg from /var/www/mrtg to /var/www/html/mrtg so i did the command ln -s /var/www/mrtg. it worked fine last week but when i checked the mrtg today it say 403 forbidden. Forbidden You don't have permission to access /mrtg/ on this server. ------------------------------ Apache/2.0.46 (CentOS) Server but when i tried to link

Hi There, I''ve installed xen 3 and xen-tools on my Debian etch server and all seems well, until I try to start a guest domain. debian:/home/xen# xm create /etc/xen/D4G3.cfg Using config file "/etc/xen/D4G3.cfg". Error: Device 2049 (vbd) could not be connected. Backend device not found. I get the error: "Error: Device 2049 (vbd) could not be connected. Backend device

Hi, i'm running CentOS 6.0 on my server and installed mrtg from the rpm-package mrtg-2.16.2 . I also installed the depending packages perl-IO-Socket-INET6 perl-Socket6 .... mrtg works fine with IPV4-Addresses. When i specify a Target by IPV6-Address (or hostname resolving to a V6-address) mrtg fails. Here i have a small sample-config for V4 which is working: LogDir: /tmp ThreshDir: /tmp