similar to: problems with multipath routing (2nd attempt)

Hello, guys! This is my very first post on this mail list.. and I hope this can be a productive relation! :-) I''m Edmundo Carmona. Computer Engineer in Venezuela. I''m also registered at the netfilter mail list and sometimes help there (as well as make questions, of course). Now the post: Some time ago, I set up a linux box that was supposed to balance the load on three

You want multiple IP Addresses for email if you are hosting more than one domain. The reason is, everyone now checks for reverse DNS with email so you need a different public IP Address for each email domain. This way, all the reverse DNS translations will be unique. For apache, you can have multiple websites sharing the same IP Address as long as you don''t do anything with SSL. SSL

Hi, I am tring to us ip route to load balance between two interfaces. ip route add equalize 10.200.1.0/24 nexthop via 10.200.0.2 dev neta nexthop via 10.200.0.2 dev neta2 Where neta and neta2 are gre tunnels. Testing show that packets travel in a single sided manner. Do I need to use the multipath (IP_ROUTE_MULTIPATH_CACHED) module? thx jason

Hi, I want to have several IP''s for my connection and each IP will have it''s own hostname. Now I want to serve a web server and mail server for each hostname/IP_addr pair on the same box in the internal LAN using one apache and one postfix daemon. If I do one SNAT and several DNATs then only the hostname which I SNAT the server to would work. Is the only way to do it

Hi, I have a linux router with 4 ethernet cards; eth0 through eth3. Basically, all I want to do is route all traffic from eth2 to eth0, and all traffic from eth1 to eth3. I''ve looked through the LARTC how-to, specifically at chapter 4, about multiple providers. However, I am still a bit confused, and not sure how to set up my routing tables, as my scenario differs from the one in the

Hi, I have established two connections to the same ISP. After that ip route list showed this: 195.14.247.94 dev ppp0 proto kernel scope link src 81.173.141.207 195.14.247.94 dev ppp1 proto kernel scope link src 81.173.237.84 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.1 default via 195.14.247.94 dev ppp0 I want 192.168.0.2 to connect to the internet by ppp1 and all

hai, i need following topics for your help give the full articals.pls send . thanks prabhukumar On Mon, 2006-10-02 at 12:03 +0000, samba-request@lists.samba.org wrote: > Send samba mailing list submissions to > samba@lists.samba.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.samba.org/mailman/listinfo/samba > or, via email, send a

The reason for the behaviour observed below turned out to be that the device entry in /etc/multipath.conf was inadvertently appended *after* the devices section , rather than inside it - so that we had #devices { # device { # blah blah # } (file has a bunch of defaults commented out) # etc #} # # device { our settings } *rather than*

No soy experto en data mining con R, sé que existe algún paquete al respecto, pero no sé si R sería lo más adecuado para cantidades ingentes de datos… Saludos, Juan Carmona. De: Eduardo Bieñkowski [mailto:edukoski@gmail.com] Enviado el: miércoles, 04 de junio de 2014 17:07 Para: Joan Carmona CC: Isidro Hidalgo; r-help-es Asunto: Re: [R-es] Cargar csv de 16GB en R Si pero que pasaría

hi all We have a rh linux server connected to two HP SAN controllers, one an HSV200 (on the way out), the other an HSV400 (on the way in). (Via a Qlogic HBA). /etc/multipath.conf contains this : device { vendor "(COMPAQ|HP)" product "HSV1[01]1|HSV2[01]0|HSV300|HSV4[05]0" getuid_callout "/sbin/scsi_id -g -u -s /block/%n"

Hello I am wondering if anyone este tried this. I Have few CentOS 6.2 systems that are running KVM virtual machines. As storage backend for them I use 2 iscsi targets (based on openindiana). For accessing these disks I use dm-multipath, since I use 2 separate networks for access. For these reasons I want host system to force not to scan dm-multipath disks for partitions. According to

Using CentOS 5.1, though with a few hours work I could update to 5.2.. I can install to SAN with a single path no problem but I'd like to be able to use dm-multipath. From the kickstart docs it seems this is supported but there is no information as to what the various options mean http://www.centos.org/docs/5/html/5.1/Installation_Guide/s1-kickstart2-options.html -- multipath (optional)

Sebastián, Una forma es aggregate(cbind(X1,X2) ~ B + C, t, function(x) mean(x < mean(x))) Saludos, Jorge.- 2013/9/25 Sebastian Kruk <residuo.solow@gmail.com> > Hola Juan. > > ¿Si yo en vez de querer obtener la media quiero sacar el porcentaje de > casos que son menores que la media como lo haría? > > Saludos, > > Sebastián. > > > El 17 de septiembre

Hopefully someone can help get multipath working inside a domU. I'm using Xen 4.2.3 on a SLES 11 dom0, and both a SLES11 domU and a CentOS 6 domU. I'm using NPIV to connect my SAN disks to my domU, and, due to the way my SAN presents the LUNs, need to use multipath inside the domU. I've tried this on both SLES11 and CentOS6 with pretty much the same result. The root issue seems to

Hi all, I have a Dell server running cent 5.6, new install, connecting to an IBM DS3500. I have configured iscsi connections using iscsid and can log into the targets on the IBM. I can also mount the LUNs when accessing them from their active controller path. When I throw multipath into the mix, it fails completely. Multipath is working, when I run multipath -ll it shows me the correct active

Hello, suppose I want to use a special configuration for my IBM/1814 storage array luns, then I put something like this in multipath.conf devices { device { vendor "IBM" product "^1814" product_blacklist "Universal Xport" path_grouping_policy "group_by_prio" path_checker

Hi. Somehow I do not see any out put using multipath -l or multipath -ll . But I can see using dry run ie multipath -d. Also I do not see /dev/dm-* It was there before. How do I re claim it. Thanks! Paras. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20100111/6c286a02/attachment-0001.html>

CentOS Errata and Enhancement Advisory 2018:0142 Upstream details at : https://access.redhat.com/errata/RHEA-2018:0142 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 52fcc4a771585ce8e80889c9b6c0a38dc3790a1cdc6e8935e1fa62e071cd4f61 device-mapper-multipath-0.4.9-111.el7_4.2.x86_64.rpm

CentOS Errata and Enhancement Advisory 2018:2464 Upstream details at : https://access.redhat.com/errata/RHEA-2018:2464 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: cf13f936fe22315827e3389260cc08aeca4d9081280e37c88fa8a9d98fd9142b device-mapper-multipath-0.4.9-119.el7_5.1.x86_64.rpm

CentOS Errata and Enhancement Advisory 2020:5022 Upstream details at : https://access.redhat.com/errata/RHEA-2020:5022 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 43561875a5de2607f06bea160d4eb38c49eb95d2de1193d32c75d69bbef928de device-mapper-multipath-0.4.9-134.el7_9.x86_64.rpm