similar to: Monitoring the traffic shaping setup

Hi, I have implemented QOS classifiers using TC with HTB. The classification is working. I would like to know whether there is some tool which will help me in monitoring the bandwidth share of the various classes. Thanks, Vinod C

Hi iam looking to graph the tc classes and qdisc iam trying to access the stef scripts but its site is totally broken could some one point me where i can graph using good docs hare

Hi I''ve patched net-mrtg http://www.net-snmp.org/ with http://x-ray.prokon.cz/data/snmp/ sucefully Also I''ve copied QOS.TXT to /usr/local/share/snmp/mibs when I make a normal use of snmp, with mrtg in order to monitor all traffic on eth0 and eth1, it works OK. But, how must I do in order to get monitor for a specific class ? If I make a snmpwalk (like README suggest), I get

Hi can anybody tell me what is the best and right way to gather statistics from htb.init usage in graphics or in any other format cause it''s pretty uncomfortable to view statistics in text when you''ve got 4 interfaces and enough filters and queues Thank you ! Dzmitryj Jakavuk

Hi All, I have one query which may be quite silly. My Linux internet gateway has Dead Gateway Detetction patches applied to it''s kernel. If I am right, the DGD patches allow us to add static routes which are not destroyed even if the interface or the link goes down. I want to know whether, with the DGD patches applied, the traffic shaping rules defined using tc, added to an interface

Hello everybody, I am new to the lartc mailing list. I have been using "tc" for some time now. To be precise, tc & HTB to shape traffic. I did a lot of search on Google for 2 things: - A GUI to create configure new qdiscs & classes for HTB - A utility that will graph the data sent through all configured classes or qdiscs. I could not find anything. Could someone tell me if a

Hi all, I hope someone can help me with this one. I'm trying to graph all traffic on the localhost's network card with Cacti. >From what I understand I should use SNMP to query the traffic, but I can't seem to get SNMP info for the network interface. I have installed all the necessary snmp tools, "yum install snmpd net-snmp net-snmp-utils net-snmp-devel net-snmpt-libs "

Hi ALL, I am trying to use the SNMP extension of michel http://x-ray.prokon.cz/data/snmp/ i pached the snmpd damon as mentioned in the README but when i run "snmpwalk -c community target enterprises.18756" i get this error "snmpwalk: No securityName specified (Sub-id not found: (top) -> enterprises)" any idea ? Thanks , venkat

Hello I'm trying to setup SNMP on my Centos 4.2 server. I want the ability to monitor the disk and some other non default settings that can be defined in snmpd.conf but when I request the data, it doesn't give the disired results. Config below and trap results below. Thanks in advance for any help. Kevin [root at localhost snmp] snmpget -v 2c -c public localhost disk

I wrote a Perl script to poll `tc` for traffic control statistics (just bytes presently) for leaf qdiscs. The information is fed to either RRDTool or Munin[2], depending on what parameter is passed to the script. If the option for a RRD database is used, graphs[3][4] are written to disk for each ten second polling interval. If invoked via Munin[2], it handles graphing and samples at five

OpenBSD 5.6 nut-2.7.2 (bin package) Liebert IntelliSlot Unity Card IS-UNITY-DP ups.conf: ...... ? mibs = ietf ? snmp_version = v1 ...... The problem is that the card responds to other snmp (v1,2c,3) requests normally but not to the 1.3.6.1.2.1.33.1.1.1.0 (UPS-MIB.upsIdentManufacturer). # snmp-ups -a laes2ups -DDDDDDD Network UPS Tools - Generic SNMP UPS driver 0.72 (2.7.2) ?? 0.000000???? debug

Couple of little things I noticed with a new RELENG_7 AMD64 box (as of yesterday) ifstat from the ports cannot seem to find interfaces for some reason ? It works fine on i386 [ns8]# ifstat -b ifstat: no interfaces to monitor! [ns8]# [ns8]# ifconfig em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I figured out why nut seemed to segfault at startup from my Solaris boxes (and snmp-ups too) - I believe that nut is trying to use some MIBs that do not exist on my particular PW9170, for whatever reason. It dies on my Linux box too, complaining like this: pkdick:~/nut/bin# ./snmp-ups -x mibs=pw -x community=publicstring upsname Network UPS Tools -

Hi John, do you have the device (which one? An old SNMP WEB or new UNITY DP or something else?) Or you like to buy one? If you have (or you can buy) the old one SNMP WEB - then nut should work fine with it via generic snmp driver and you don't need anything else. If you have (or you must buy) the new one UNITY DP - then I can share my snmp subdriver for it, and you should insert this

Hello all, We have two ADSL lines configured on a single box, hence interfaces ppp0 & ppp1. Is there a way to route packets to ppp0, say based on destination port 80 & other traffic like voice through ppp1? Thanks.

Greetings all, I''ve been searching high and low for any inkling of how people are monitoring classes for long term usage data. I''m thinking something along a script to collect the data for mrtg or perhaps even an snmp module that would present them as interfaces to be polled....has anyone done any work in this area? John Dunning Assistant Director Net & Tech Svcs Wayne

Dear All, I have configured Cluster Suite with 2 servers Server 1 : 192.168.13.110 IP Address Server 2 : 192.168.13.179 IP Address Floating : 192.168.13.83 IP Address (Assumed by currently active server) I want all snmp packets going out through the active server to be stamped with floating IP So i have added a iptables rules as "iptables -t nat -A POSTROUTING -p udp -s

I had been using L7-Filter[1] successfully for edonkey/eMule traffic until recently. I upgraded to the latest release of mldonkey, 2.5.28a, which implements eMule compatibility, and with support for Kademlia[2] enabled, network latency increases greatly. [1] http://l7-filter.sourceforge.net/ [2] http://www.infoanarchy.org/wiki/wiki.pl?Kademlia Has anyone created a new pattern match for

Hello, I setup iproute2 and iptables on my box, is a P4 2000 Ghz / 1GB memory. I have setup squid and iptables to be a transparent proxy, with cache. I''ve read on lartc.org almost everything and i want to ask if there is a u32 match for the connection time or something like that, or an u32 match for the packet number in a connection. All i want to do is shape the web traffic for long

I reported this previously and it was verified. Is this a bug in netlink or what? Who should I report this to? Original Oops report: http://mailman.ds9a.nl/pipermail/lartc/2004q2/012614.html Thanks. Linux rebecca 2.6.4 #1 Mon Sep 27 15:16:48 EDT 2004 i686 GNU/Linux Sep 27 19:02:58 rebecca kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 Sep 27 19:02:58