similar to: Ho do i manage NAT''ed egress bandwidht?

Hi, I''m getting this warning/error in /var/log/messages: May 26 18:21:05 mail kernel: HTB: quantum of class 10010 is small. Consider r2q change. Its a big deal? What should I do? Many thanks Oliver -- Oliver Schulze L. <oliver@samera.com.py>

Hi, there is something I''m not able to understand about HTB statistics. Why the qdisc show show how many packets are overlimits but in the classes there are always 0 packets overlimits or dropped? I try to expain with a simple example. I create a qdisc htb with only a class and then i do a lot of traffic. pc-innocenti:~# tc qdisc add dev eth0 parent root handle 1: htb default 10

Hi all, We have 2 class C networks that are connected by a Linux router with the internet. We want to apply traffic control (bandwidth control). For that we wrote the tcc script below. We have 2 problems: 1. To establish a 2 megagit download we must actually set the value to 2500kbps. Is there a possible reason for that? 2. If we enable the WAN device we get very hight ping times (they change

Hi everyone, My HTB script is showing me those "r2q change" warnings. I read that I should test with r2q values to gain accuracy and stop the warnings but I made some tests with r2q and with burst and I still get the warnings. Any ideas on this issue will be very helpful. The script seems to be working as the bandwidth for the IPs is being shaped. The NIC works at 100mbit and the

Hi all, I have 2 questions regarding policing 1. What is the problem with policing as in most mesages I can find people say don''t but I have not found a why? 2. I have the egress below working (numbers in example are bogus, I know). How do I add an ingress policy? /* compile this file with tcc filename > limit.sh and run that file */ dev eth1 { egress { class (

Hi, I want to stop routing for 1 particular host in my network. I thought that this would do it: iptables -D INPUT -d aaa.bbb.ccc.ddd -j DROP iptables -D INPUT -s aaa.bbb.ccc.ddd -j DROP But that still shows traffic. What is the corract way to do that? Groeten, Joost Kraaijeveld Askesis B.V. Molukkenstraat 14 6524NB Nijmegen tel: 024-3888063 / 06-51855277 fax: 024-3608416 e-mail:

Hi all, I want to apply traffic control using TCNG 1.30 on a NAT router. Can I use the IP addresses on my LAN to shape the traffic on the outgoing interface, with other words, does the address translation take place before or after traffic control? (Or does it depend and if so, on what?) Groeten, Joost Kraaijeveld Askesis B.V. Molukkenstraat 14 6524NB Nijmegen tel: 024-3888063 / 06-51855277

Hi all, I get this warning from Asterisk and I want to assess whether it is important, and if so, if I should complain to the telephone manifacturer or start up my programmer's editor: chan_sip.c:5152 handle_response: Host '172.31.1.7' does not implement 'NOTIFY' What does this mean and am I missing some important feature? Groeten, Joost Kraaijeveld Askesis B.V.

Hi all, The following ingress statement: .... $host2 = SLB(cbs 1024kb, cir 2048kbps); class(<>) if ip_dst == 81.175.84.2 && SLB_else_drop($host2); .... is compiled by TCNG into the folling tc command: ... tc filter add dev eth0 parent ffff:0 protocol all prio 1 u32 match u32 0x51af5402 0xffffffff at 16 classid ffff:0 police index 505 rate 256000bps burst 131072 mpu 0 action

Hi all, It is my understanding that with HTB, the rate and the ceiling are divided over the elements of the class. E.g. using a rate of 100 kb and a ceiling of 2000 kb for a class with 10 elements on a 100Mb NIC, the effect of the ceiling will be that if all elements are generating their maximimum possible trafic they will be effectively limited to ~ ceiling / number of elements, in this case

> After functioning correctly for more than 6 months suddenly > Samba died : the users and usergroups are not recognized > anymore. Restarting the Windows 2000 ADS (mixed mode) server > and/or the Debian Samba server does not help. I even re-added the > server to the domain: > > net rpc join -U Administrator reports a sucessful join. > Active Directory shows the Debian

My gateway is showing these messages: htb*g j=4929 htb*r7 m=0 htb*r6 m=0 htb*r5 m=0 htb*r4 m=0 htb*r3 m=0 htb*r2 m=0 htb*r1 m=0 htb*r0 m=0 HTB: quantum of class 10001 is big. Consider r2q change. What does it means ? Thanks, Luciano Lima _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:

Hi, Is it possible to create a routing rule that depends on the source host/network, besides the target host/network? E.g. route everything from 192.168.0.x to 10.0.0.1, and route everything from 192.168.1.x to 10.0.0.1. TIA -- Groeten, Joost Kraaijeveld Askesis B.V. Molukkenstraat 14 6524NB Nijmegen tel: 024-3888063 / 06-51855277 fax: 024-3608416 web: www.askesis.nl

Hi, I have a router that should do routing between 2 networks for a network *except* if the destination is a private network *and* the source is a specific machine, in which case it has to NAT. I thought that this would do the trick: .... iptables -A POSTROUTING -s 10.20.1.0/24 -d 192.168.0.0/16 -j RETURN iptables -A POSTROUTING -s 10.20.1.1 -o eth1 -j SNAT --to-source 172.16.0.1 .... But

Hi everybody! I''m using an edge bridge box with two ethernet cards to shape traffic in a WAN link. I''m running Debian 3.1 stable with kernel 2.6.8 and iproute from packages. I recompiled the kernel with the following built-in options: [*] 802.1d Ethernet Bridging [*] QoS and/or fair queueing <*> HTB packet scheduler <*> SFQ queue [*] QoS support

Hi, Is it possible to manage bandwidth based on a router macaddress that is between two machines? E.g. dest<-->bandwidth management <-->router<-->source Groeten, Joost Kraaijeveld Askesis B.V. Molukkenstraat 14 6524NB Nijmegen tel: 024-3888063 / 06-51855277 fax: 024-3608416 e-mail: J.Kraaijeveld@Askesis.nl web: www.askesis.nl

Hi all, I want to create a bridge (see picture below) between 2 LANs with the same IP range (192.168.0.0/24) using 2 wireless links that use load sharing over multiple interfaces (as descibed here: http://lartc.org/howto/lartc.loadshare.html) for load balancing and fault tolerance. Both links should use IPsec for encryption. I have googled for an example that does this but I could not find it.

Hi Thomas, > Try to: > > - stop winbindd > - remove the winbindd_cache.tdb file > - start winbindd again. This did not do it. > If it doesn't help: > - what samba version are you running? > - what errors do you see in the log.winbindd and log.wb* log files? Upgrading from samba_3.0.14a-3 to samba_3.0.14a-3sarge1, and adding winbind separator = + winbind use

Hi, After functioning correctly for more than 6 months suddenly Samba died : the users and usergroups are not recognized anymore. Restarting the Windows 2000 ADS (mixed mode) server and/or the Debian Samba server does not help. I even re-added the server to the domain: net rpc join -U Administrator reports a sucessful join. Active Directory shows the Debian server's computer account wbinfo

What exactly happens if the sum of the children classes rate is bigger than the parent''s? What if the majority of these classes are using less than the minimum rate established (eg. 0kbps)? -- Marco Casaroli SapucaiNet Telecom +55 35 34712377 ext 5