similar to: Please help - totally confused (NAT + FWMARK + IMQ + HTB)

Hi, i am running imq + htb on my router , the situation is like this eth0 = uplink to my provider eth1 = 1st customer eth2 = 2nd customer eth3 = 3th customer eth0 has limit 512 and i want to share this between eth1 eth2 and eth3 , but not working , this is the script i used, \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ #!/bin/sh

i''m trying to limit upload and download but something is wrong(it is about NAT) i will post here my "script" maybe someone could tell me what is wrong my kernel(2.6.9) is patch with imq(linuximq.net) and my iptables(1.2.11) also #flush tc qdisc del dev eth0 root tc qdisc del dev eth1 root tc qdisc del dev imq0 root tc qdisc del dev imq1 root ifconfig imq0 down

Hello, I wrote a simple traffic shaping script (below) that should have allowed me to shape my internet traffic a bit (ppp0 - adsl 128kbit/64kbit; local interface eth0). The script works only partially - the speed is being limited but too much. Without running this script my download rate is about 10kBytes (with second computer also downloading at about 6kBytes). After running it my download speed

Folks, I''m so surprised what happened to my box just in the few weeks lately. Here is my setup: INTERNET <----------> [eth0] SHAPER-BOX [eth1] <----------> USER-FARM both eth0 & eth1 got public ips (202.x.x.x) Why traffic monitored at eth0 is bigger than eth1 ? eth1 shaped just exactly the same as rate i defined in HTB. I just have 1024Kbps from my ISP and i defined the

Hi. The configuration script is at the bottom. My configuration looks similar to this: imq0 | 1:1 (12mbit) | 1:2 (10mbit) | 3:0 | 3:1 (256kbit) / \ 3:2 3:3 icmp (rest) both 3:2 and 3:3 have rate 1kbit ceil 256kbit Icmp bucklet have priority 1 (better), "rest" bucklet have prio 2 (worse) I tested the script with heavy download

Hello, I have HTB on IMQ device. My rate does not work as I configured. I configured 1920kbit/s and I can download only about 290kbit/s (while it should be the whole bandwidth). My script: /sbin/modprobe imq numdevs=1 /usr/local/sbin/tc qdisc del dev imq0 root 2> /dev/null > /dev/null /usr/local/sbin/tc qdisc del dev imq0 ingress 2> /dev/null > /dev/null /sbin/ifconfig imq0 down

Hello to all people there . Can i guarantee ICMP respond time no metter how loaded is internet line . i have typical NATed enviroiment like External IP |linux router| LAN - 192.168.0.0/24 i have example setup with IMQ but is it possible to be done also if i attache htb to eth0 and eth1 for example . if i start shaper ping i better that without shaper but it''s not guarantted i mean

I want to shape the incoming traffic ( download ) "but using only fwmark", i know there are other methods, but i want to use this one particularly... So, first i create DOWNLOAD and mark with 20 all the traffic with destination 10.0.0.3 ( eth1 ) incoming from my internet device ( eth0 ). #$IPTABLES -t mangle -N DOWNLOAD #$IPTABLES -t mangle -I PREROUTING -i eth0 -j DOWNLOAD

hi stef oone more pb while shaping incoming traffic with imq .this one tc qdisc add dev imq0 root handle 1: htb default 20 tc class add dev imq0 parent 1: classid 1:1 htb rate 2mbit burst 15k tc class add dev imq0 parent 1:1 classid 1:10 htb rate 1mbit tc class add dev imq0 parent 1:1 classid 1:20 htb rate 1mbit tc qdisc add dev imq0 parent 1:10 handle 10: pfifo tc qdisc add dev imq0 parent

Hello I have a server with a dsl connection on eth1 and local interface eth0. Because of the NAT i cannot direct traffic to IMQ device in PREROUTING chain but have to use INPUT and FORWARD. So i use rules. iptables -t mangle -A INPUT -i eth1 -j IMQ --todev 0 iptables -t mangle -A FORWARD -i eth1 -j IMQ --todev 0 And now the strange thing: FORWARD traffic gets directed nicely to the IMQ, but

Hi all, my IMQ device works OK (thanks to Andy Furniss), but now I''ve problems to attach the traffic in the qdisc''s. This is my conf: ----------------------------------------------------------------------- INET | |eth0 300Kbps ROUTER (NAT) |eth1 | LAN ----------------------------------------------------------------------- MAX=300 tc qdisc add dev imq0 root handle 1: htb

Hi All, I''m trying to create a contended section of bandwidth using IMQ. I have the imq0 device up and running, with traffic passing through it. Firstly, I need to throttle the entire device imq0 to 2mbit/s. I would then like to add throttle rules for individual IP addresses, allowing them to pass up to 512kbit/s each, as long as imq0 has not reached its 2mbit/s. The configuration

HTB and imq was used to control traffic. modprobe imq numdevs=3 but only imq0 and imq1 can be used; if there are five NICs, please tell me how can I can use imq2 , imq3 and so on. _________________________________________________________ Do You Yahoo!? 新鲜到底,娱乐到家 - 雅虎推出免费娱乐电子周报! http://cn.ent.yahoo.com/newsletter/index.html _______________________________________________ LARTC mailing list /

first: my ISP mark MAN traffic with TOS 15 and i want tu can to filter this kind of traffic with iptables second: i use imq patch for kernel 2.6.9 and htb for some traffic management third: i want to redirect the traffic marked with TOS 15 imq1 or imq0 and then to came with some htb rules. just this ... how must to modified to can to do some thins ? ... #iptables -t mangle -A PREROUTING -m

I want to shape the bandwith for only 2 PC''s but cannot make this work. This is what i do ( i want to use imq for all this ) ip link set imq0 up tc qdisc add dev imq0 root handle 1: htb default 2 tc class add dev imq0 parent 1: classid 1:1 htb rate 100kbit burst 6k prio 0 tc class add dev imq0 parent 1: classid 1:2 htb rate 50kbit burst 6k prio 2 tc filter add dev imq0 parent 1:

On my debian woody (kernel 2.4.31) the tcpdump doesn''t work with imq0 devices. If I try to tcpdump imq devices there is no packet seen: [...] rt1:~# tcpdump -n -i imq0 Warning: arptype 65535 not supported by libpcap - falling back to cooked socket tcpdump: WARNING: imq0: no IPv4 address assigned tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on

I have: tc qdisc add dev imq0 root handle 1: htb default 30 tc class add dev imq0 parent 1: classid 1:1 htb rate 512kbit ceil 512kbit tc class add dev imq0 parent 1:1 classid 1:30 htb rate 64kbit ceil 512kbit then: iptables -t mangle -A PREROUTING -i ppp0 -s 192.168.2.2 -j IMQ --todev 0 tc class add dev imq0 parent 1:1 classid 1:22 htb rate 64kbit ceil 128kbit tc filter add dev imq0 protocol

bridge was configured with "brctl" three NIC was bind to br0 imq and htb was used to control traffic. #modprobe imq numdevs=3 "htb scripts" #iptables -t mangle -A PREROUTING -i br0 -j IMQ --todev 1 #ip link set imq1 up but this can not do the traffic controling. please tell me how can i do _________________________________________________________ Do You Yahoo!? 银行巨头聚会中原

Hi I try setup imq pseudo device for shaping I''m work such script #!/bin/sh TC=/sbin/tc /sbin/modprobe imq numdevs=1 /sbin/ip link set imq0 up $TC qdisc add dev imq0 handle 1: root htb default 1 $TC class add dev imq0 parent 1: classid 1:1 htb rate 10mbit # client1 tunnel tunnel $TC class add dev imq0 parent 1: classid 1:2 htb rate 256kbit $TC filter add dev imq0 protocol ip parent 1:0