similar to: tcng

Hello. I have been trying to duplicate these u32 matching rules using TCNG, but without much success: tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32\ match ip protocol 6 0xff \ match u8 0x05 0x0f at 0 \ match u16 0x0000 0xffc0 at 2 \ match u8 0x10 0xff at 33 \ flowid 1:10 Wondershaper 1.1a implements this and if I run it things seem to be shaped as expected. But this TCNG

Help! I can''t get TCNG to compile!!! It did this on 2 different machines! Here are the errors: -------------------------------------------- Kernel: 2.4.22 [root@localhost tcng]# uname -a Linux localhost.localdomain 2.4.22-1.2149.nptl #1 Wed Jan 7 13:08:26 EST #if KFULLVERSIONNUM >= 0x20416 /* gratuitous interface change in 2.4.22 :-( */ ERROR: ake -f Makefile.unclean tcsim make[2]:

Hi, I downloaded the latest tcng release, however am having problems to build it.below are the kind of error messages am getting. Do u people have a clue as to why this is happening ? Thanks in advance =-============================================ - - - - make[3]: Entering directory `/home/joolia/tcnge/tcng/tcsim/ulib/iproute2/lib'' gcc -D_GNU_SOURCE -O2 -Wstrict-prototypes

How To Installing tcng at slackware 10.1

Hi all, Can I give more bandwidth to a specific URL. Regards Abdul Khader __________________________________ Do you Yahoo!? Yahoo! Small Business $15K Web Design Giveaway http://promotions.yahoo.com/design_giveaway/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

I can''t seem to match packets less than 512 bytes: class( <$bulk> ) if tcp_dport == 81 && !( ip_len & 0xfe00 ) ; or if tcp_dport == 81 && ip_len < 512 Both rules match any packet I send to port 81, even when the total IP length is much greater than 512 bytes: class htb 2:4 parent 2:1 leaf 5: prio 1 rate 8000bps ceil 24000bps burst 6Kb cburst 1839b Sent

Hi I have tried to compile tcng-9m using Linux SuSE 9.1 Professional on my Intel box but it doesn''t work as follows: Step 1 - Downloaded iproute2-2.4.7_now_ss020116_try-i386-2.tgz Step 2 - Downloaded tcng-9m.tar.gz Step 3 - Downloaded linux-2.5.4.tar.bz2 Step 4 - Source kernel 2.5.4 extracted to directory ~/tcng/tcsim Step 5 - Source iproute2-2.4.7 extracted to directory

How can i do a tcng configuration with nested classes, could someone give me a example -- Juan Felipe Botero Ingeniería de sistemas Universidad de Antioquia _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

I know that tcng is old but I have a question about it. Was there ever a way to inject real traffic into the simulation, something like the output of tcpreplay? Thanks, Larry

hello people and nice to meet you. tasoss@starla:~/tcng$ ./configure Reading configuration defaults from ./config building tcsim: yes Kernel source: /home/tasoss/linux-2.6.16.20 Kernel version: 2.6.16 iproute2 source: /home/tasoss/iproute2-2.6.16-060323 iproute2 version: 060323 Host byte order: little endian tcng command: /home/tasoss/tcng/bin/tcng YACC is:

Hi all, this is really not really very easy to understand, or, to get in. Well, I''ve the following configuration on the router box: LAN - interface: eth0 - network: 192.168.2.5/24 - bandwidth: 100Mbit/s INET interface - interface: ppp0 - network: .dynamic.ip./0 - bandwidth: DOWN=1536kbit/s and UP=256kbit/s the LAN interface is to serve 6 other clients with internet and

... is on SourceForge, http://tcng.sourceforge.net/#src Besides a bunch of bug fixes, this release also contains a greatly improved version of the comtc utility that copies comments from the tcng source to tcc''s "tc" output. There are a few infrastructure changes to make comtc work smoothly: - tcc''s -E option is now called -Wexperror or -Wexppostopt, respectively

I had been using L7-Filter[1] successfully for edonkey/eMule traffic until recently. I upgraded to the latest release of mldonkey, 2.5.28a, which implements eMule compatibility, and with support for Kademlia[2] enabled, network latency increases greatly. [1] http://l7-filter.sourceforge.net/ [2] http://www.infoanarchy.org/wiki/wiki.pl?Kademlia Has anyone created a new pattern match for

Hello all, We have two ADSL lines configured on a single box, hence interfaces ppp0 & ppp1. Is there a way to route packets to ppp0, say based on destination port 80 & other traffic like voice through ppp1? Thanks.

Hello, I setup iproute2 and iptables on my box, is a P4 2000 Ghz / 1GB memory. I have setup squid and iptables to be a transparent proxy, with cache. I''ve read on lartc.org almost everything and i want to ask if there is a u32 match for the connection time or something like that, or an u32 match for the packet number in a connection. All i want to do is shape the web traffic for long

I reported this previously and it was verified. Is this a bug in netlink or what? Who should I report this to? Original Oops report: http://mailman.ds9a.nl/pipermail/lartc/2004q2/012614.html Thanks. Linux rebecca 2.6.4 #1 Mon Sep 27 15:16:48 EDT 2004 i686 GNU/Linux Sep 27 19:02:58 rebecca kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 Sep 27 19:02:58

Hi, i want to control in my network, the netmeeting transfer of traffic, how can i control the audio or video transfer whether this services use dynamics ports? thanks -- Juan Felipe Botero Ingeniero de sistemas Universidad de Antioquia _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

I have a question, can i use traffic control in a linux pc if the linux is enabled as a bridge? -- Juan Felipe Botero Ingeniería de sistemas Universidad de Antioquia _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Hi, I have implemented QOS classifiers using TC with HTB. The classification is working. I would like to know whether there is some tool which will help me in monitoring the bandwidth share of the various classes. Thanks, Vinod C

i have 4096 ip''s how many clasesc can i use i wanna to mark classes like ip 81.180.254.123 -> class 81180254123 or 89.32.32.49 -> class 89323249 can i use this kind of class? Thank''s