similar to: Advanced routing routing table limits and rule design

How to use IFB as replacement of IMQ There is not much documentation about it Please explain with example -- Failure seldom stops you. What stops you is the fear of failure. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

helo again. I think this question i am asking is worth: we know that pppoe-server creates a pppX device on each connection done to it. So, when i have to shape, i have to shape each pppX connection device on itself alone. What i know is that the borrowing method on one device by itself, e.g. ppp0, alone using HTB or the like. this means that i have to create for another device, e.g. ppp1,

Hello. The problem I have is route nat. Short question: Must "route nat", mentioned in ip-cref documentation comming with iproute2 package, work with 2.6.9 kernel? Long question and description of the problem: There is an appendix C in ip-cref by Alexey Kuznetsov called "Route NAT Status". I''ve followed this configuration with 2.4.2x kernel and everything works.

Hello, This is a CentOS 5.2 box configured as a router for a network handling about 200-300 Mbps, routing traffic to/from the internet for about 6,000 IPs. After about 2-3 days, the kernel complains about "dst cache overflow" and even thought it hasn't crashed, the network is un-responsive. All IP forwarding stops and the server cannot be reached from any network interfaces.

From: Cong Wang <amwang at redhat.com> This is a long-standing bug and reported several times: https://bugzilla.redhat.com/show_bug.cgi?id=880035 http://marc.info/?l=linux-netdev&m=136164389416341&w=2 This bug can be observed in virt environment, when a KVM guest communicates with the host via multicast. After some time (should be 260 sec, I didn't measure), the multicast

I know I have some quirky behavior involving my layer two tinc host, and the IPv6 subnet that runs off of it. Facebook just issued a kernel patch that changes the behavior of the IPv6 tunnel mechanism: I can't tell from the patch itself, if it might also improve functionality for non IP6-IP6 tunnels.

On 25/07/2018 10:59 PM, David Miller wrote: > From: "Michael S. Tsirkin" <mst at redhat.com> > Date: Wed, 25 Jul 2018 12:40:12 +0300 > >> On Mon, Jul 23, 2018 at 11:36:03PM +0900, Toshiaki Makita wrote: >>> From: Toshiaki Makita <makita.toshiaki at lab.ntt.co.jp> >>> >>> Add some ethtool stat items useful for performance analysis.

On 25/07/2018 10:59 PM, David Miller wrote: > From: "Michael S. Tsirkin" <mst at redhat.com> > Date: Wed, 25 Jul 2018 12:40:12 +0300 > >> On Mon, Jul 23, 2018 at 11:36:03PM +0900, Toshiaki Makita wrote: >>> From: Toshiaki Makita <makita.toshiaki at lab.ntt.co.jp> >>> >>> Add some ethtool stat items useful for performance analysis.

Yesterday while fixing xoff stuckiness issue in the TUN/TAP driver I got a chance to look into the multicast filtering code in there. And immediately realized how terribly broken & confusing it is. The patch was originally done by Shaun (CC'ed) and went in without any proper ACK from me, Dave or Jeff. Here is the original ref

Yesterday while fixing xoff stuckiness issue in the TUN/TAP driver I got a chance to look into the multicast filtering code in there. And immediately realized how terribly broken & confusing it is. The patch was originally done by Shaun (CC'ed) and went in without any proper ACK from me, Dave or Jeff. Here is the original ref

The following series adds 2 new flags to bridge. One flag allows the user to control whether mac learning is performed on the interface or not. By default mac learning is on. The other flag allows the user to control whether unicast traffic is flooded (send without an fdb) to a given unicast port. Default is on. Changes since v4: - Implemented Stephen's suggestions. Changes since v2: -

Hello, I recently figured out, that it is impossible to activate the "Advanced Printer Features" of any printer attached to a samba server. The idea was simple: set up a cups print server, create raw printers, publish them via Samba and distribute corresponding driver files. Everything works fine, except of the general setting for the "Advanced Printer Features". Root is able

Hello, I haven''t been keeping up with sending ESFQ [ANNOUNCE] messages to this list, but I''ve still been working on the patch. If you''re curious about recent changes, take a look at the home page, ChangeLog, and README: http://fatooh.org/esfq-2.6/ http://fatooh.org/esfq-2.6/current/ChangeLog http://fatooh.org/esfq-2.6/current/README Meanwhile, I''m interested

3ware now provides driver disk for CentOS. A couple of months ago, I had to add support for the 3ware 9550sx. The driver disk provided for CentOS 4.1 work perfectly. I now need to add support for the 3ware 9550sx for CentOS 4.3 x64. Although the driver disk is available, it doesn't seem to work. Anaconda just can't find the 3w-9xxx module. This is the same seutp as CentOS 4.1 (which

Great thanks, I'll test your config files now! some questions before: > I would also recommend Installing the 'acl' & 'attr' packages (if not already installed), those are installed and at the latest version on the file share server, are they needed on the AD too (I would think no)? > read up on using POSIX ACLs and lose the 'force' lines in the member

The following series makes use of the skb fragment API (which is in 3.2 +) to add a per-paged-fragment destructor callback. This can be used by creators of skbs who are interested in the lifecycle of the pages included in that skb after they have handed it off to the network stack. The mail at [0] contains some more background and rationale but basically the completed series will allow entities

We are running a windows 2000 domain where I work. I am developing a linux client for desktop deployment so that we can stop the spread of cancer (read microsoft). I can get winbind to join the domain, but when i try a winfo -t, it tells me "could not check secret". I have scoured the internet looking for help and could not find anything. I used the HOW TO from John Trostel, with no

http://bugzilla.mindrot.org/show_bug.cgi?id=1155 djm at mindrot.org changed: What |Removed |Added ---------------------------------------------------------------------------- BugsThisDependsOn| |1218 Bug 1155 depends on bug 1218, which changed state. Bug 1218 Summary: GSSAPI client code permits SPNEGO usage

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 http://marc.theaimsgroup.com/?l=openbsd-misc&m=106375452423794&w=2 http://marc.theaimsgroup.com/?l=openbsd-misc&m=106375456923804&w=2 Does this affect FreeBSD? - -Justin -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/Z7QbdYQBw9Ox1VgRAsb2AJ0eZxI/s3Q5KJQxvgROLM8FnU1kiQCfSsma XcJ/R/6s9yQJwBTYDeWI2+Y= =BoVH