similar to: HTB at 100+ Mbits/sec

When I run this: tc filter add dev eth0 parent 1: protocol ip prio 1 handle 1 fw I get: RTNETLINK answers: Invalid argument The traditional interpretation of that gnarly error message is that cls_fw is missing, but lsmod | grep cls_fw gets me: cls_fw 2336 4 (autoclean) I can''t remove it because it''s in use, but all 4 statements that use it failed, so

Hello I am using htb (krenel 2.6.14.3 + esfq patch from fatooh.org) to limit the bandwidth. But I want the absolute maximum rate to be for example 5Mbit and not to exceed it. here is the script: $tc qdisc add dev ${NETIF} root handle 1 htb r2q 4 $tc class add dev ${NETIF} parent 1: classid 1:21 htb rate 5Mbit ceil 5Mbit $tc class add dev ${NETIF} parent 1:21 classid 1:101 htb rate 2Mbit ceil

Hey, one more question for ipp2p iptables -t mangle -A DSL-IN -p tcp -m ipp2p --ipp2p -j CONNMARK --restore-mark iptables -t mangle -A DSL-IN -p tcp -m mark ! --mark 0 -j ACCEPT iptables -t mangle -A DSL-IN -p tcp -m ipp2p --ipp2p -j MARK --set-mark 7 iptables -t mangle -A DSL-IN -p tcp -m ipp2p --ipp2p -j CONNMARK --save-mark iptables -t mangle -A DSL-IN -p udp -m ipp2p --ipp2p -j MARK

Hi all. I''m going on my 3rd week trying to get a simple traffic shapping to work the right way :( !! My goal it to shape the traffic coming from one machine (pc1) to another machine (pc2) throught the "eth0" interface. My test configuration is as follows: PC1   IP: 192.168.105.237   Mask: 255.255.255.0   OS: Red Hat Linux Kernel 2.4.20-8   Rules:

Hi all, I am running Slackware 10.1 with Kernel 2.6.14.3 includes iptables 1.3.4 with layer 7 My network diagram below: - INTERNET --- LINUX_ROUTER_FW --- PCs Below is my simple iptables script: - echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -t mangle -A POSTROUTING -m layer7 --l7proto applejuice -j MARK --set-mark 1 iptables -t

Hi all, based on the information in the "Linux Advanced Routing & Traffic Control HOWTO", I was trying to set up traffic shaping on my firewall. While I found the HOWTO very useful, in the process I ran into some problems that I did not forsee: According to the HOWTO it seems that it should have worked, even after spending some time going through the sections looking for answers,

Hi, my situation: One internet connection 256 kbps uplink/downlink, pretty stable speed, a Linux router with three NICs (one to ISP, one to DMZ and one with VLANs enabled to our LAN). Each of three VLANs (1, 10, 11) is a region for me; id 1 gets guaranteed 128 kbps, id 10 and 11 both get guaranteed 64 kbps (both uplink and downlink). Simple configuration. After I read relevant parts of lartc

Hi, I''ve failed miserably in my endeavours so far and I''m at the point where help would be much appreciated. I want to have 3 bandwidth limited classes on my Internet interface. In each of those classes I want 3 prioritization bands, and then use "tc filters" to place the traffic into the correct class and priority. The problem is that the traffic

Hi, I have a setup like this: class 1:1 rate 7600kbit (on a imq device) | |\class 1:10 rate 100kbit ceil 5600kbit prio 7 (here goes p2p traffic) \class 1:12 rate 7500kbit ceil 7600kbit | |\class 1:121 rate 3100 ceil 7500kbit prio 0 |\class 1:122 rate 2200 ceil 7500kbit prio 2 \class 1:123 rate 2200 ceil 7500kbit prio

I''ve applied julian''s paches to a 2.6.14 gentoo kernel with the appropiate options enabled, and i''m using a modified version of the mpath2.sh script also available on julian''s site http://www.ssi.bg/~ja/ Overall everything works nearly perfectly. Incomming connections to either the fios (PPPoE) connection, or cable modem get routed back out correctly. The

Could whomever is in charge of the lartc mailing list please change it to add the header: Reply-To: lartc@mailman.ds9a.nl Every other list I''m on is setup so that by default replies will go to the list. When replying to lartc emails I notice myself and others constantly forgetting this list does not behave like the rest, and that we have to either do a reply-to-all, or manually enter in

Hello everyone, I''m a newbie experimenting with CBQ shaping and am facing a few problems. Can any of you please help? TEST SETUP: +---------------+ +----------------+ | 10.0.0.103 |----------->| 10.0.0.102 | +---------------+ +----------------+ 10.0.0.103: Linux, 100Mbit/s NIC 10.0.0.102: Windows, 100Mbit/s NIC, iperf tcp server (ports 2000 and 2001) WHAT I

I''m using HFSC to limit bandwidth for our wireless customers. However, I''d also like the bandwidth prioritized based on packet type. This is what I''m trying right now, and I''d just like some input from anyone out there knowledgeable in this on whether it does what I want it to do: Eth1 -> HFSC ........|-> HFSC (User1) (Min 512 Kb, Max 1024 Kb, Burst 1536

Hi all, I just recently began using HTB to try and manage bandwidth for my network. This is the script I''m using: /sbin/iptables -t mangle -A FORWARD -o eth1 -s ! 192.168.244.2 -j MARK --set-mark 53 tc qdisc add dev eth1 root handle 1: htb default 20 tc class add dev eth1 parent 1: classid 1:1 htb rate 100mbit burst 131072k quantum 59000 tc class add dev eth1 parent 1:1 classid 1:10

Hello, First of all, I already contacted Martin Devera, the developer of HTB, and he told me to search for help on this mailinglist, thus I am describing my problems here now... I am kind of seriously annoyed by QoS as I have been trying for over 3 years to get it working properly - first I did not understand how it works, then it seemed not to work, then it was working perfectly for half a

Hello all, I have set my QoS solution and now I am facing a little problem... When I ping to my server it has some lost packages: Estatísticas do Ping para 172.30.0.1: Pacotes: SENDED = 1029, RETURNED = 880, LOST = 149 (14% de perda), Aproximar um número redondo de vezes em milissegundos: Mínimo = 0ms, Máximo = 686ms, Média = 105ms If I disable my QoS ping stats to be ok. I even have

Hi, I wanted to implement some QOS on my Linux Box with HTB, but after some time spend on the configuration and tests, I still don''t manage to have some correct results. Here are the details : -ROOT 2000 kbits -HIGHPRIO SUBCLASS 50 kbits prio 0 -SUBCLASS1 750 kbits prio 1 -SERVICE1 250 kbits prio 1

Hello all, I am trying to match some conections using u32 but I tryed this: [root@ns1 ~]# tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip src 0/0 match ip dst 0/0 match ip sport 80 0xffff flowid 1:10 RTNETLINK answers: Invalid argument We have an error talking to the kernel [root@ns1 ~]# I have this class at device eth1: [root@ns1 ~]# tc class show dev eth1 class

Hello I have some rules inserted in the NAT table dual SNAT and DNAT for a connection They use at some moment the same port of the outside network. The problem i have is that the connection tracking in the kernel checks first the oldest rule and then the newest one. I use a system based on ARM XScale processor. Is that the default behaviour and how can i change this behaviour? Marius

Hello, I''ve been trying to shape the bittorrent traffic (on my external interface, upload), but without luck, for this I''m using layer7 filter right now, but I''ve also tried ipp2p, with the same results, I might say that this is not a problem with this packet classifiers, the problem is with HTB, here''s why. When I open azureus (the bittorrent client I