similar to: SNMP docs

Dear all, I have installed mrtg via yum on centos 7, and using cron job to load mrtg every 5 mins. Everything work fine but just snmp v3 graph no show up. I try to load the command LAND=C /usr/bin/mrtg /etc/mrtg/metg.cfg it will show an error "SNMP V3 libraries not found, SNMPV3 disabled.". so, i installed all the net-snmp but still showing the error. I can't find any suggestion on

Hi Rowland, I'm still seeing the problem that I described earlier. I have however uncovered some more information that might help resolve the issue. On Thu, 18 Apr 2019 at 13:10, Mason Schmitt <mason at ftlcomputing.com> wrote: > Hi Rowland, > > > I hope someone has seen this before and knows what's going on. Given >> > the time delay between the problem

Hello Yes i have separate class for every user, every class have pfifp qdisc. User direction shaping: tc -s -d qdisc show dev eth2 | grep pfifo |wc -l 3959 Internet direction shaping: tc -s -d qdisc show dev vlan0891 | grep pfifo |wc -l 3959 Nat: iptables -L -n -v -t nat | grep SNAT | wc -l 3959 For shaping i use hfsc classifier. Date: Fri, 15 Jul 2005 14:16:33 +0200 From: Peter Surda

Hi David On 4/29/20 3:28 PM, David Zomaya wrote: > Is NUT using the same SNMP v3 user as your SNMP Set or a different one? > > If it is a different one (e.g. an SNMP v1 or v2c string) does that user > / community string have read/write access? I tried setting them all with -x thing= arguments as well as letting it pull from ups.conf, same result. It's all SNMPv3 settings. sudo

Hi Jim, On Tue, 18 Feb 2014, Jim Klimov wrote: > Hello all, > > I was asked about a proper way to ensure powerfail shutdown of a blade > server fed off an APC SmartUPS, which is monitored by all hosts over > SNMP. In particular, they'd like to avoid the "untimely" return of > utility power - when the OSes are already shutting down, and would > stay down

On Jan 27, 2019, at 2:36 PM, Phil Stracchino <phils at caerllewys.net> wrote: > > SO, my full load on my core UPS is two Dell R610s, one Sun X4540, one HP > DL360p gen8, two six-core Thuban-II workstations plua their monitors, > and the network stack and KVM. > > The APC SU3000RM (3KVA) that blew up last week considered this to be > just short of 60% load. > The new

Dear All, I'm having trouble on 2 laptops Lenovo B580 since upgrading to Centos6.5. ( Because it's a Lenovo I cannot switch the network card for a better supported network card. ) There on the latest kernel : root at jac network-scripts]# uname -a Linux jac.cawdekempen 2.6.32-431.1.2.0.1.el6.x86_64 #1 SMP Fri Dec 13 13:06:13 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux With the help of

On 2014-02-19 03:04, Tim Rice wrote: > If you've got a AP9630 card these notes may be useful. > > # APC ap9630 notes: > # Use firmware 6.0.6 or later if you want SNMPv3 > # Configuration->Shutdown > # In "Start of Shutdown" section, set "Low Battery Duration" and > # "Shutdown Delay" to get enough grace time for the ESXI shutdown > #

Hi gents, I have a CentOS 6.6 install with net-snmp running. I'm using SNMPv3 Auth and Encryption with Observium polling devices every five minutes. On one of my Centos server, the net-snmp process will die after 24-36 hours of running. It seems to be hitting my system maximum file open limit which is set to 1024. > [root at mail net-snmp-5.7]# ulimit -n > 1024 That number will

On Nov 30, 2017, at 6:31 PM, Lee Damon <nomad at ee.washington.edu> wrote: > > SNMPv3 works fine when I have any one of the three configured in > ups.conf while the other two are configured with SNMPv1. It doesn't > matter which _one_ UPS is configured for SNMPv3 in ups.conf, they all > work individually (see below example). > > However, if I configure any two or

Just a hunch about your snmpwalk, what happens if you format like this? snmpwalk -l authpriv -v 3 -u user -a MD5 -x DES -A authpassphrase -X privpassphrase {host address} so snmpwalk -l authpriv -v 3 -u nut -a MD5 -x DES -A NutScan at Password43LongerWord -X NutScan at Password43LongerWord apcups Thank you, David Zomaya Tripp Lite ________________________________ From: Nut-upsuser

Is anyone using snmp-ups with the -k option successfully? This is really starting to look like a bug somewhere in nut, not a config problem. I've just tried the same command from a FBSD box with the same unfortunate result. Mind you, it could be the UPS card, I'm using the same one for both tests. : || nomad at castle nut-2.7.4 [93] ; please drivers/snmp-ups -a nutdev1 -x

I'm trying to get SNMPv3 management working for an APC AP9617 card. It is newly refurbed, running sumx v3.7.2 and aos v3.7.3. In the SNMPv3 user profiles section I have (I don't care about the password leaking, it's temporary): User Name: nut Authentication Passphrase: NutScan at Password43LongerWord Privacy Passphrase: NutScan at Password43LongerWord Authentication protocol:

> I did some local testing and it seems that you are using a curve that is not acceptable for openssl as a server key. > > I tested with openssl s_server -cert ec-cert.pem -key ec-key.pem -port 5555 > > using cert generated with brainpool. Everything works if I use prime256v1 or secp521r1. This is a limitation in OpenSSL and not something we can really do anything about. > >

Hello. We're running Samba 4.3.9 AD on two Ubuntu 16.04 LTS machines. I'm managing AD users and DNS from Windows 10 joined to the domain, by using ADUC. Last week I noticed the following error when starting ADUC as Administrator of the AD domain: ---- Naming information cannot be located because: The RPC server is unavailable. Contact your system administrator to verify that your domain

New NUT install dealing with three APC Smart-UPS 5000s, two of which have AP9617 and the third has a AP9619 card. The SNMPv3 configurations on all three are exactly the same. This is confirmed by snmpget calls that work just fine: snmpget -Cf -v3 -u [...] -l authPriv -A '[...]' -X '[...]' -a MD5 -x DES [upsname] .1.3.6.1.4.1.318.1.1.1.1.1.1.0 snmp-ups can query all three

On 1/27/19 9:13 PM, Charles Lepple wrote: > On Jan 27, 2019, at 2:36 PM, Phil Stracchino <phils at caerllewys.net > <mailto:phils at caerllewys.net>> wrote: >> The new Cyberpower PR3000 (also 3KVA), wqhich operates at a 90% power >> factor, considers this same load to be 43% load. >> >> I wasn't expecting that much of a reduction. > > So... 50%

Hello, I have the AR9285 wireless adaptor on an HP DV6-2128ca notebook. I can see it. it comes up in NetworkManager but never gets an IP. the router is a linksys using WPA/PSK security. Would/could someone please help me out trying to get this to work? Output of several commands follows: dmesg: ath: EEPROM regdomain: 0x69 ath: EEPROM indicates we should expect a direct regpair map ath:

1 4 499492 150392 4496 4763380 0 0 192 552 1227 1094 2 0 75 24 0 0 5 499492 150656 4500 4763528 0 0 0 160 465 263 1 0 68 30 0 0 5 499492 150468 4500 4763532 0 0 0 0 177 93 1 0 69 31 0 1 5 499492 151020 4500 4763540 0 0 0 0 160 132 0 0 69 31 0 1 5 499492 151268 4500 4763540 0 0 0 0 304 143 1 0 69

Dear all, I have a working 802.1x structure with a bunch of Cisco switches, and a couple of NPS RADIUS servers. 802.1x auhtentication with MSCHAPv2 is working with Windows clients and I need to get some Centos clients into the structure. I've been using wpa_supplicant and now it would be usefull to have an auto start script when the interface detects a link and call the supplicant to