similar to: mrtg monitoring shaped traffic

Hi, I have setup MRTG with 14all.cgi cgi script. I downloaded it from below URL. http://my14all.sourceforge.net/14all-1.1.txt and did only below 3 changes to that file. those can be seen in BOLDletters. # if MRTG_lib.pm (from mrtg) is not in the module search path (@INC) # uncomment the following line and change the path appropriatly: #use lib qw(/usr/local/mrtg-2/lib/mrtg2); use lib

Hi all. I am having an issue and quite frankly would rather not spend the entire next two days learning the entire snmp program. I am hoping someone out there has used MRTG and SNMP to make it work. I have both installed. Single server, polling itself. Question 1- does snmpd have to run as a daemon, or only run once so I can get OID and MIBs from it? Question 2- does anyone know the command

Hi guys, I''m new to TC HTB traffic shaping.... I installed it at my first try on my Bearing Leaf Router/Firewall I use the tc -s class show dev eth? To see my output All looks dandy and nice, but it''s figures, of which at current momment looks like French to me, I would like to see exactly what these figures looks like in a GRAPH style... I know I can use MRTG, I do have

Hi All, I am a new member of this list. I want to know about a way to monitor the traffic shaping setup to confirm whether it is working as expected. I went through the archives of this list and found some pointers related to tc-snmp extension/patch for net-snmp and some perl scripts on www.docum.org. I want to know whether this type of a setup work. Or else is there any other way ? Actually I am

Hi, i'm running CentOS 6.0 on my server and installed mrtg from the rpm-package mrtg-2.16.2 . I also installed the depending packages perl-IO-Socket-INET6 perl-Socket6 .... mrtg works fine with IPV4-Addresses. When i specify a Target by IPV6-Address (or hostname resolving to a V6-address) mrtg fails. Here i have a small sample-config for V4 which is working: LogDir: /tmp ThreshDir: /tmp

I got itchy fingers over the weekend and decided to fix what wasn't broken and upgraded one of the older servers from Centos 5.2 to Centos 5.3. Following the recommended process of updating glibc and such before the rest, it appeared to work perfectly and rebooted without problem. However, MRTG 2.15.2 started complaining about unexpected values. I installed/updated both MRTG (2.16.2) and

Has anyone written any MRTG scripts for monitoring domain CPU usage? It''s probably pretty simple to do, but there''s not much point re-inventing the wheel. Thanks James _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi, I''ve managed to create a web based interface to some of the advanced routing capabilities in Linux. Currently it is functional (and pretty, i think :) although far from perfect. I''m looking for people with better programming skills and/or understandings of advanced routing concepts in Linux than I have who''d like to help out with the project. The overall goals

Hello all. I created a "plug and play" kind of solution for bridge-based QoS LAN-WAN traffic shaping. Based on the LEAF bering-uClibc branch, I''m calling it ''QBox'' and the project site for now is located at: http://content.cs.luc.edu/projects/comp412/q-box I''m interested in any feedback you might have. This is based off of experience I have over the

Hi all, I've just recently replaced my old firewall with a new one, running CentOS 5.. Yesterday, I decided to get MRTG up and running again, so I entered sections like this into the mrtg.conf file: Title[vlan10]: Bandwidth usage on tenchi.4th-age.com (Internet) PageTop[vlan10]: <H1>Traffic stats on VLAN 10 (Internet)</H1> Target[vlan10]: `ifconfig vlan10 | /usr/bin/awk

i''ve installed mrtg to make graphics of the trafic from the interfece throw the snmpd, and the same with ipac witch put iptables accounting rules colect them and store, and gets the output, but the "problem" is that ipac graphics are 3 times smaller that the snmpd. Why??? i did catch all the trafic with ipac so no problem here, and i know that ipac/iptables is at level 3, and

mrtg-drop-hits v1.3 Thanx a lot to Steve Cowles for his help and improvements CHANGELOG: 1.3 - 2003-01-10 - fix: size of counter_file equals zero - Bering/ash compatibiliy added by Steve Cowles - INSTALL.snmp added by Steve Cowles - small cleanup in INSTALL ftp://slovakia.shorewall.net/mirror/shorewall/mrtg/ http://slovakia.shorewall.net/pub/shorewall/mrtg/

Greetings all, I''ve been searching high and low for any inkling of how people are monitoring classes for long term usage data. I''m thinking something along a script to collect the data for mrtg or perhaps even an snmp module that would present them as interfaces to be polled....has anyone done any work in this area? John Dunning Assistant Director Net & Tech Svcs Wayne

I want to check some client OpenVPN TUN interfaces with MRTG running at my VPN server, so I have to specify their OID interface numbers in mrtg.cfg. The problem is, these numbers are dynamic, as they may change whenever OpenVPN restarts for any reason... so, how can I write stanzas such as Target[somehostvpninterface] : ifInOctets.X&ifOutOctets.X:public@ <SOMEHOST.IP> without wiring up

On Tue, 22 Jul 2008, tl wrote: > I search a simple variant to generate CPU,Load for MRTG. > Actually I use following configuration. > But I see CPU-usage of xen0 only, not a summary of all VM. > - net-snmp does not support xen [1]. > - dtc-xen [2] show CPU-usage from each VM, but not summary. > This view is confusing. [3] > For monitorings from more than 3 physical

Hallo xenusers, I search a simple variant to generate CPU,Load for MRTG. Actually I use following configuration. But I see CPU-usage of xen0 only, not a summary of all VM. - net-snmp does not support xen [1]. - dtc-xen [2] show CPU-usage from each VM, but not summary. This view is confusing. [3] For monitorings from more than 3 physical machines unpractically. - enomalism [4] is too large

Hi I''m trying to move the tracking of the shaping from MRTG to Cacti. My predecessor, who built all this stuff and was far more advanced than I, had a shell script that collected data by running tc -s qdisc show dev on both eth 0 and 1 and then pushing it out via snmp to another server running MRTG. I''m building a new server with cacti and having trouble with the custom

Hi all Just wondering if anyone has pointers for graphing data from Samba using MRTG. I already have MRTG graphing things like signal strength (cisco aironet pci), total kbps in/out each interface, mem and disk i/o usage. I'd like to graph, for example, average number connections over time; or maybe logins per hour .... or failed logins per hour. I know MRTG's requirements for input

I check system load like so: [root at server cron.daily]# w 10:07:33 up 4 days, 15:01, 2 users, load average: 4.22, 3.17, 3.09 I would like to to graph the 3.17 5 minute average with MRTG. Anyone know of some examples of doing this?

Hello, I am a newbie . I use a PC which have Windows OS . I want to monitor bandwidth , bytes, packets, packet dropped etc at several linux routers . I want to ask you some questions : Can I use round robin database and mrtg tool to generate html files at linux routers and call them from windows PC ? If it is impossible , can I use snmp to retrieve data from linux router at windows PC (snmp