similar to: Problem attaching htb class to a htb qdisc

Hello, I''m a total tc newbie, and I''m trying to tweak the wondershaper script (http://lartc.org/wondershaper/) to get a slightly different result. Excuse me if I will not use the correct technical terms, it''s a whole new world to me :) wondershaper.htb creates 3 HTB classes; 1:10 is high prio, 1:20 is bulk (default), and 1:30 is low priority. The classes are

Hi! I''m trying to limit the uplink bandwidth using htb but no packets are overlimit or dropped. :-( My router config: * Linux kernel 2.4.20-pre10 (htb v3.7) with everything built as modules in QoS, iptables in use. * tc binary from htb3.6-020525.tgz * external interface eth0: Internet access, 512 kbit/s uplink speed * internal interface eth1: internal LAN, 100 Mbit/s The hosts in the

Hello, I’ve read this Article avout VOIP and HFSC http://automatthias.wordpress.com/2006/06/30/hfsc-and-voip/ I’ve got few questions ? Considering this tc class add dev $DEV parent 1:1 classid 1:2 hfsc \ rt m1 ${UPLINK}kbit d 50ms m2 $[1*$UPLINK/10]kbit \ ls m1 ${UPLINK}kbit d 50ms m2 $[3*$UPLINK/10]kbit \ ul rate ${UPLINK}kbit rt = realtime curve ls = linksharing curve but m1 = ? m2 = ? d =

Hi folks, I''m trying to shape two clients in my LAN when accessing the internet. Actual situation is that EVERY traffic goes into 1:40, so the client which should fall into 1:30 does not get the lower uplink it should have, but the uplink defined for the client defined as 1:30 When I disable the definition of 1:40, every traffic falls into 1:30 (except for the traffic defined to be in

As seen on my post at: http://www.sveasoft.com/modules/phpBB2/viewtopic.php?p=28112#28112 This works very well... It does NOT work with stable 4.0! sveasoft will be issuing a bug fix for this (4.1) in the near future. Final Rev of working script w/ asterisk support I'm not going to run alchemy on production machines until it is stablish. Remember to set your uplink properly and to set

tc class add dev $DEV parent 1: classid 1:1 htb rate ${UPLINK}kbit burst 6k tc qdisc add dev $DEV handle ffff: ingress tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip src \ 0.0.0.0/0 police rate ${DOWNLINK}kbit burst 10k drop flowid :1 why does the download is being sent to class 1 which is limited by uplink ? why the rate is being mentioned in filter and in class ?

Hi I''m moving to hfcs (mostly succesfuly:) ), but I''ve encountered a strange problem: When I download something from this server using wget (one thread) via an idle uplink, I get no more than 130 kbit/s, and when I''m using prozilla (or start more wgets), I get about 200 kbit, but still it''s not all the link can do (240) - the rest remamins unused. Is this

Greetings, My question deals with the htb version of wonder shaper. I used it for some time without much alteration except I noticed something odd in the way the rates are set up for the 3 htb classes. The way I understand it, there are 3 classes: 1:10 - high prio class with rate ${UPLINK}kbit 1:20 - bulk/default class with rate $[9*$UPLINK/10]kbit 1:30 - bulk/default low priority

Hi all, I''ve got a BOX running CentOS 4.5. It acts as a firewall + router. I have installed both iptables and iproute2. I has 3 network cards. eth0 is connected to Internet (is has an internet ip. pls assume its ip is 1.2.3.4/29). it is a 256 Kbit link. eth1 is DMZ. its ip is 192.168.100.254 eth2 is LAN. Its ip is 192.168.101.254 I have alreday shaped traffic to 64 Kbit on eth1 for

Dear friends: I was analizing the HTB script at "The ultimate traffic conditioner", at the Cookbook, at Lartc. I have a very basic question: First, it is defined the root htb qdisc, as expected; then, it is defined the main (parent) htb class, with the total uplink as rate, also as expected; then, they are defined 2 child clases: first of them has also the total uplink as rate (!)

Hi all, ive got 2 internet connections set up via the nano howto (which are working great) and we are running NAT. Was looking in to qos mainly to stop large http downloads/ftp downloads from hogging the line so that browsing for other users doesnt slow to a crawl, but if the line is free and no one is doing anything then for it to use the available bandwith. The wondershaper sounded exactly what

Hello, First of all, I already contacted Martin Devera, the developer of HTB, and he told me to search for help on this mailinglist, thus I am describing my problems here now... I am kind of seriously annoyed by QoS as I have been trying for over 3 years to get it working properly - first I did not understand how it works, then it seemed not to work, then it was working perfectly for half a

Hi,lartc I used iproute-060110 with iptables1.3.4 on gentoo 2005r1 kernel 2.6.14-5. I find some error messages in system logfile: HTB: quantum of class 10001 is big. Consider r2q change. HTB: quantum of class 10010 is big. Consider r2q change. tcf_action_init_1: successfull police HTB: quantum of class 20001 is big. Consider r2q change. HTB: quantum of class 20020 is big. Consider

Hi! I recently changed my qdisc from CBQ and PRIO to only HTB, and I can''t really seem to get the rates to work as I want them to. I have eight classes, which I set up as follows: tc qdisc add dev eth1 root handle 1: htb default 122 tc class add dev eth1 parent 1: classid 1:1 htb rate 1000kbit ceil 1000kbit cburst 1500 burst 50kb tc class add dev eth1 parent 1:1 classid 1:11 htb prio 0

Hi! Could somebody tell me, what is difference between these two prio parameters in http://lartc.org/lartc.html#AEN2241 1) tc class add dev $DEV parent 1:1 classid 1:10 htb rate ${UPLINK}kbit burst 6k prio 1 ^^^^^^ AND 2) tc filter add dev $DEV parent 1:0 protocol ip prio 10 u32 match ip tos 0x10 0xff flowid 1:10

Hi I tryed to use a htb qdisc/class on top of another htb qdisc/class as you can see bellow: #!/bin/bash tc="/sbin/tc" $tc qdisc del dev eth0 root $tc qdisc add dev eth0 root handle 1: htb default 40 $tc class add dev eth0 parent 1: classid 1:1 htb rate 100Mbit burst 15k $tc class add dev eth0 parent 1:1 classid 1:10 htb rate 50Mbit burst 15k $tc class add dev eth0 parent 1:1 classid

Hi All, I''m using iptables-1.2.7a on RedHat8 kernel 2.4.20. I wanted to limit the file-sharing traffic to the internet. I marked the packets with iptables: iptables -A FORWARD -t mangle -p tcp -s 192.168.1.1/24 -d ! 192.168.1.1/24 --dport 1024:1862 -j MARK --set-mark 1 iptables -A FORWARD -t mangle -p tcp -s 192.168.1.1/24 -d ! 192.168.1.1/24 --dport 1864:65535 -j MARK --set-mark 1

Hi, I have a typical configuration for my firewall/gateway box: single network card, with a pppoe connection to the DSL modem. I''m already successfully shaping the uplink (how come that the wondershaper.htb doesn''t use the ceil parameter? It should implement bandwidth borrowing!) but i found the ingress policy a little bit rough. I''d like to keep the traffic categories

Hi, When i do ''wshaper start'' the interface i have defined stops routing traffic for some reason. It resumes routing when i do ''wshaper stop''. I''m using debian stable (3.0 woody) with debian''s default 2.4.18-686 kernel. When I run the script I get no errors, and when I do a ''status'', everything looks correct. Can ANYONE

I am looking for a good htb traffic shaping script to prioritize incoming traffic over outgoing traffic for my machine. I have a 100mbit line, ftp up, backup data comming in, but whenever mirrors starts grabbing it they use all the traffic and the backup data comming in (the important data) drops to like 300kb/sec. I was thinking some script doing sleep 60 [if downstream > 1mb/sec, limit