similar to: Incoming traffic

Hello, i try to use iptables to mark packet and then to filter them with tc. Here is my script: iptables -t mangle -A PREROUTING -s 172.28.54.41/32 -p tcp -j MARK --set-mark 1 tc qdisc add dev eth0 handle ffff: ingress tc filter add dev eth0 parent ffff: protocol ip prio 1 handle 1 fw police rate 10000kbit burst 10000kbit mtu 1500k drop flowid :1 I can not use u32 because i have several

Hello, I''m using a script with tc, to limit my outgoing traffic : tc qdisc add dev eth0 root handle 1: htb tc class add dev eth0 parent 1: classid 1:1 htb rate 500kbit burst 6k tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip dst 172.28.54.9 flowid 1:1 I want to test bandwidth with iperf to see if limitation is correct. Sometimes, I get correct measure for certain rates,

Hi ; MY script: tc-htb3 qdisc del dev eth2 root ipchains -F tc-htb3 qdisc add dev eth2 root handle 10: htb default 20 r2q 40 tc-htb3 class add dev eth2 parent 10: classid 10:1 htb rate 50Mbit burst 2000 tc-htb3 class add dev eth2 parent 10:1 classid 10:100 htb rate 12mbit ceil 50mbit prio 1 tc-htb3 class add dev eth2 parent 10:1 classid 10:20 htb rate 38mbit ceil 50Mbit prio 8 ipchains

Hi, I have little experience with Wine. I use it to run two old applications I made on Windows98. With WINE 1.4 installed on Ubuntu 11.10 32 bits, they both run fine. On my new install of Ubuntu 12.10 64 bits, with the same settings, one of them won't run. First I installed WINE 1.5.3 from the Wine ppa. Then I uninstalled it and installed WINE 1.4 from the Ubuntu repositories. In both

My hfsc rule .. tc qdisc add dev eth2 handle 1: root hfsc iptables -t mangle -N ms-all iptables -t mangle -N ms-all-chains iptables -t mangle -N ms-prerouting iptables -t mangle -A PREROUTING -j ms-prerouting iptables -t mangle -A ms-prerouting -j CONNMARK --restore-mark iptables -t mangle -A ms-prerouting -p udp --dport 4444 -j MARK --set-mark 1 iptables -t mangle -A ms-prerouting -p udp -m

Hi, I'm moving my config to a new PC. I do not wish to reinstall all Windows apps under Wine. So I installed Wine on the new PC (Ubuntu 11.10), ran wincfg and then I copied the files from the old PC /home/.wine to the new one. My problem is : how can I recover the menu entries that were created when I first installed the Windows apps under Wine ? I searched the whole file system for .desktop

Hello, I have the following proplem. My DiffServ configuration is working fine when I do ping, but when I use mgen the packets are not detected at the core router. Here is my core router configuration: #!/bin/bash tc qdisc add dev eth1 handle 1:0 root dsmark indices 64 set_tc_index tc filter add dev eth1 parent 1:0 protocol ip prio 1 tcindex mask 0xfc shift 2 tc qdisc add dev eth1 parent

Hello! I need to switch from htb2 to htb3, because of speed issues (for me, htb2 is unable to handle more then 100mbit duplex with ~550 classes), kernel profiling shows htb_dequeue_prio at 1st place with 3x isolation. So, I''ve moved from 2.4.19 to 2.4.25 kernel (hi-pac for classification/marking and htb3 for queueing), and traffic rate drop from 100 to 20mbit. What can be wrong? The

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Is there any grapical interface for the QoS (Quality of Service) Traffic Control in Linux ? Greetings. - --- Carles Xavier Munyoz Baldó carles@descom.es Descom Consulting Telf: +34 965861024 Fax: +34 965861024 http://www.descom.es/ - --- -----BEGIN PGP SIGNATURE----- Version: PGP 6.5.8

Hello to everybody, We want integrate in a router/firewall (Debian Based, 2.6 Kernel), an HTB shaper. The goal is to divide the traffic for classes of workstations, at example in three classes, let say A, B and C. Example: A 70 Mb/s B 20 Mb/s C 10 Mb/s If B don''t make traffic, 7/8 of 20Mb/s must be assigned to A and all the rest at B We have used CBQ and HTB, with poor succes. Anybody

Hi, got a 25/25Mbit connection which is quite stuffed. So I applied htb rules. Uplink: class htb 1:1 root rate 24500Kbit ceil 24500Kbit burst 4661b/8 mpu 0b overhead 0b cburst 4661b/8 mpu 0b overhead 0b level 7 Sent 430600689269 bytes 730147320 pkt (dropped 0, overlimits 0 requeues 0) rate 23057Kbit 5520pps backlog 0b 0p requeues 0 lended: 199673949 borrowed: 0 giants: 0 tokens: -964

Hello I have few questions regarding tc functionality (qdiscs, classes, etc.) when vlans are in use. For example, consider interface eth0, for which I create and extra vlan with vconfig, let''s say eth0.11. Then using tc I can add usual things - qdiscs, filters, ... - to both eth0 and eth0.11. The questions are: - on which interface - virtual or real, should I actually use tc ? Or

I would like to test police in ingress. I use kernel 2.4.20. I use this configuration: iptables -t mangle -A PREROUTING -i eth0 -s 10.31.12.2 -d 10.31.11.2 -p udp --dport 1001 -j MARK --set-mark 1 iptables -t mangle -A PREROUTING -i eth0 -s 10.31.12.2 -d 10.31.11.2 -p udp --dport 1002 -j MARK --set-mark 2 iptables -t mangle -A PREROUTING -i eth0 -s 10.31.12.2 -d 10.31.11.2 -p udp --dport 1003 -j

Hi, I''m trying to perform some (what I consider) basic traffic shaping on our network utilising HTB. I have mostly reused the example on the lartc.org site: tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 100mbit burst 24k tc class add dev eth0 parent 1:1 classid 1:10 htb rate 50mbit ceil 80mbit burst 19k tc class add dev eth0

Hello, i made this script : tc qdisc add dev eth0 handle ffff: ingress tc filter add dev eth0 parent ffff: protocol ip prio 1 u32 match ip src 138.96.20.0 police index 1 rate 20000kbit burst 20000kbit drop flowid :1 tc filter add dev eth0 parent ffff:1 protocol ip prio 1 u32 match ip src 138.96.20.23 police index 2 rate 15000kbit burst 15000kbit drop flowid :2 tc filter add dev eth0 parent

List, Long and confusing message follows... I'm facing a frustrating problem. XP clients can use resoures on the samba server by IP-address, but not by name. So, "net view \\servername" gives "access denied" but "net view \\ipaddress" gives list of shared resources. Samba server (3.2.7 sernet rpm) is a member server in W2003 domain. I emphasise that with

Hi. -j IMQ is equal -j ACCEPT...? i mean it after -j IMQ packet don''t return in parent chain??? cause -j ACCEPT action accept the packet in the child chain and don''t return it to parent... example: ipt="iptables -t mangle" $ipt -N HTTP $ipt -A HTTP -j IMQ // after this packet packets go to -t nat tables? or // it return to parent chain (PREROUTING) in mangle?

Hello, I have problems with htb. The problem is that when I download any file via shaper with htb, the traffic is very dinamic, it jumps, for example: if i have set ceil = 128kbit the results that it jumps from 112kbps to 144kbps or smth like that maybe its not very bad, but when the traffic drops down to 40kbps or less and then after 1 or 2 seconds jumps to 144kbps, its bad :-( and it is often.

Thanks for quick reply Andreas! > Every class is allowed to use bandwidth as long as it does not have to > borrow (the specified rate is guaranteed). Prio in HTB only affects > borrowing bandwidth from other classes... In the example below, the class > 1:5 should be allowed to borrow bandwidth before 1:14 does. Thats exactly what I want from HTB to do..to prio the borrowed bandwidth.

Hello, Stephen, List! Attached is the patch for iproute2 to add the possibility to use fwmark in u32 filters. The kernel part was included in 2.6.10. Please apply! Thank you! For more info: - Kernel patch (not needed for 2.6.10): http://kernel.umbrella.ro/net/mark_in_u32/net-match-nfmark-in-u32.patch - Examples: http://kernel.umbrella.ro/net/mark_in_u32/examples.txt --- Catalin(ux aka Dino)