similar to: Linux as T1 router

Hello All, I''ve been playing around with HTB and reading the various lists for information on how to limit bandwidth on a particular ip or mac address. If I understand correctly, in order to use HTB for this, I would have to create a separate root class for each ip address that I wanted to limit. I have tried this and it seems to work. This seems okay for a few ips, but seems

Hi all, please, tell me about security of Darkstat. Is it good idea to install it on firewall/gateway ? I'd like to measure our company traffic, but I do not have Apache running on the gateway. How could I redirect Darkstat's output to web-server inside company ? Or is there some other tool, which can measure in/out traffic and send output to another machine ? I know MRTG, but it uses

hi all :) anyone knows some Real time traffic grapher application ? faster than mrtg , im not looking for web based ones ... -- You will soon forget this.

Hi, Using 4.4.23.2 on a single host. A host x.x.x.x is sending traffic although it blacklisted and blocked rules rules: DROP net:x.x.x.x/21 $FW - - - DROP net:x.x.x.x/22 $FW - - - DROP $FW net:x.x.x.x/21 - - - DROP $FW net:x.x.x.x/22 - - -

Hi, I''m a relative newbie to LARTC but I have read Matthew Marsh''s book and lurked on this list for a while.... I still seem to be missing a few key ideas here.... So... Maybe folks on the list will be kind enough to help. I have two different ISPs. Cogent and Bell. I have three different firewalls (2 PIX and 1 IPCop). And I have an Ubuntu Linux box doing LARTC for around

Hi There, we only have a /29 internet routable network from our ISP and a Cisco 1601 router with serial interface doing all the routing. I was thinking of replacing that cisco with a linux box with a sangoma card, also using quagga with ospf on for my internel networks has anyone have expierence with this? thanks Sew

I have installed Asterisk on a CentOS4 box and then installed Asterisk from CVS. I installed a Sangoma A101 and connected it to a Adtran 600 using a T1 Crossover cable. The 600 has 12 x FXS, 12 x FXO interfaces. I ran through the wanpipe install instructions and configured it, now I can run [root@altpbx asterisk]# wanrouter hwprobe ------------------------------- | Wanpipe Hardware Probe Info

I upgraded from Tormenta2 to Sangoma A101. I followed the instructions, and installation was successful. zttool, ztcfg, all show card is installed properly. I copied the parameters from my old working zaptel.conf, zapata.conf and zapata-auto.conf. Verified on Sangoma website that these files are correct. Also configured wanpipe1.conf. But doing all this didn't start the PRI channels. It says

Hi, I have Mandrake 10.0 (official). I have read the section in lartc about "Routing for multiple uplinks/providers", but still I have some queries below. I have a DSL connection where they give pppoe which is directly terminated into eth1 of my Linux box. Now I have another machine connected to dial-up and it is on same LAN connected to eth0 of Linux box. Now, can I use both these

Hi, I need some help with a routing/shaping setup that is a bit beyond my current linux routing knowledge. I''ve read the how-to and most of the related mailing list topics, but I still need some help to solve this problem. I''ve been asking questions on various lists, but it seems like the answers just add additional confusion. I decided to just describe what I''m trying

Hi- I''m working in the IT department of a small liberal arts university-- we''re getting *massacred* by P2P traffic. Informal testing/probing indicates that about 60% of our traffic from the dorms was P2P-- we''ve taken the initial step of hardlimiting the dorms to no more than 40% of outgoing university bandwidth. Also, we''ve blocked the

Hi list, I've browsed through the wiki pages and finally would like to get some answers from peple who perhaps had used such card. I have the sangoma s508 card. It has no CSU/DSU. It is an ISA card with DB9 and DB25 connectors (for RS232 and V34/X21/EIA interfaces). They claim it is a frame relay and syncronous ppp card. Can I use this card with asterisk in any way but without

I have been looking at the rhino r1t1, and digium single t1, and the sangoma, but from what i read they all sound like good products. Anyone have anything bad about any one of them? I am leaning towards the sangoma as it seems to have a better following here on the lists. Any advice is appreciated.Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

Howdy, I've spent a couple of days writing a new feature for Asterisk that allows to record calls in T1 or E1 PRI lines using Asterisk connected to tapped lines. This means that you don't have to install anything in the PBX's/telco equipment that is going to be monitored, all you need is to install a device like the PN 633 Tap Connection Adapter that is available for example, from

Hi, I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box. *Its not detected.* Details are as below :- [root at asterisk ~]# lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI

I'm connecting a T1 PCI card to a Nortel Option 61 switch T1 card. My Sangoma A102D shipped with 2 T1 cables - which I assume are straight through. Do I need to make crossover cables for this scenario? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071026/9cea5e74/attachment.htm

Hi, I learned about shorewall a few days ago and am quite impressed with how easy it was to create a powerful firewall. I set up a test system with a cable modem and it worked flawlessly. I''m going to be building a Router/Firewall for a new T1 that will be using a Sangoma WANpipe card w/ integrated CSU/DSU to connect to a T1. Has anybody done this yet, or do you know if it''s

I'm going to need to build a few Asterisk boxes that have dual and quad T1 interfaces. I knew Digium made T1 interface cards and on this list I heard about Sangoma so I did a quick search and found the hardware page at voip-info.org which lists several manufactures I didn't know about. All that leads to this question: I'll be using T1s in the USA. What experiences have you all had

Hi, I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box. *Its not detected.* Details are as below :- [root at asterisk ~]# lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI

At Sangoma we do quite a lot of back-to back T1 and E1 connections. T1 is not a very fussy connection, as the baud rate is only about 750 kbps. In our experience, for error free communications you can use the following rules of thumb: Up to 50 ft: Flat patch cable Up to 500 ft: Ordinary twisted telephone cable Cat 5 may be overkill unless you are going hundreds of feet. David Yat Sin