similar to: wan card routing

I have three ethernet card and two of them connected to diffrent ISP and has diffrent gateways. And one ethernet card is connected to local lan. I have installed iptables and configured the firwall to work as nat gateway for the users. Now I want to route only mail traffic to the perticular ISP and which I am not able to do it. I have done iproute configuration what ever lartc said. But still I

Hi, I''m researching for WAN optimizations with linux. My network is composed for MPLS network connecting 200 branches against a central site. I use Linux machines to provide security with IPSEC in the branches and in the central site. Now I''m lookup for techniques for optimization the link. My first ideas was use IPCOMP and proxy to cache traffic of HTTP applications. Somebody

Hi all, I''ve a routing problem. I''m setting up a router based on debian (kernel 2.4). I need to setup routing to export an ftp service (ftp server is in dmz) to 2 wan (both). I setup prerouting ad forward rule with no problem. The problem is that reply packet use default gateway (default wan) even though they are enter using the other wan. I solved it marking packets in input

Hi, I''m implementing a linux router with this characteristics: - Multiple adsl with each public ip''s - Multiple LAN ethernets (in a bridge). - Linux IGD I have successfully implemented de 2 first steps, the adsl balanced fine (multipath routing), and the clients bridge fine. My problem is how to use that with linux-igd. My LAN bridge has STP and is implemented for

Is anybody using Asterisk with a dual WAN router (Xincom XC-DPG602, Hawking H2WR54G, Fortinet FortiGate-60, SonicWall etc) ? -- #Joseph

Hello All, We have 2 Samba servers in our domain at our site. Server A) is a Primary Domain Controller that everyone logs into and Server B) just has drives shared on it. We have another site with a Server C) running MARS NWE we are connected to via a 256k WAN link. If we were to run Samba on this Server C) and set it up like Server B) i.e. Have all 3 servers in the same domain all with one

Hi, I came across the 'CTDB_CAPABILITY_LMASTER=no' and 'CTDB_CAPABILITY_RECMASTER=no' options in my quest to salvage a rather poorly performing CTDB cluster over Ceph(fs). Unfortunately, the docs provide not enough information for a clustering noop like myself. Would there be any benefit to disabling those options for a branch office node on a high-latency WAN connection?

Hello ! sorry for english, but, just don't understand why glusterfs is not destinated to be used over the wan ? I think that if the files are tiny, there's no problem to use this solution over wan.. ? But okay, if file are large.. (don't know .. 100MB - 200MB and more.) i understand that it depend of the internet connection and that's the replication can be so soo soo slow..

<P>Hi list,<BR><BR>is it possible to create something like a ISDN-WAN-WAN-ISDN bridge?<BR></P> <P>We have to change our location, but our number and the telephone system should shoulb stay the same.</P> <P>&nbsp;</P> <P>kind regards,<BR>Patrick Stuckenberger</P>

ClarkConnect Home 3.2 eth0 - WAN - inet - ip:192.168.1.2 gw:192.168.1.1 (connected to my www.woosh.co.nz gatway) wlan - WAN - private community wireless networt - ip:10.252.16.16 gw:10.252.16.1 eth1 - LAN - ip:192.168.2.1 # route add -net 10.0.0.0 netmask 255.0.0.0 gw 10.252.16.1 [root@bowenvale etc]# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface

We have a client that wants to bond 2 DSL circuits instead of getting a T-1 (or similar) at their office to run their VoIP traffic on. We came across this Multihomed Gateway (MH200): http://www.cyberpathinc.com/mh200/details.htm Does anybody think this would work if installed at the client location handling NAT for 10 Cisco 7960's and connecting to our public asterisk server? My concern

Since we're on the subject of Samba over the WAN.... (BTW, I'm running three offices with a Samba 3.0.9 PDC and two Samba 3.0.9 BDCs over an FreeSwan based WAN and it works just fine. The WINS server is a must in my book though.) Last Thursday and Friday, one of the remove office's WAN lines went down. While the outages were significant, nothing major happened because of it. But,

Arch = x86_64 OS = CentOS-6.4 (centos) with all updates applied to date. On our gateway host eth0 is the WAN access and eth1 is the LAN. I wish to activate the address 192.185.71.1 on eth1. The ifcfg-eth1:192071 file contains this: NAME="" BOOTPROTO=none MACADDR="" IPV6INIT=no DEVICE=eth1:192071 NETMASK=255.255.255.0 MTU="" BROADCAST=192.168.71.255 ONPARENT=no

Hi - I have shorewall-1.3.8-1 on a RH 7.3 machine that acts as a firewall for my network. It was running the other day just fine, but today I have problems getting to the firewall. It is a frame-relay network with Cisco routers. Everything is 192.168.x.x / 24. I can''t ping the firewall from the WAN, but can from the main LAN. Sounds like a routing issue to me, but it was working for

Hi All, I have a customer that I need to give access to one of our servers over a WAN. Their box is running some windows server version and they use terminal services to let their employees access their applications. We use Samba in or local office environment where it works quite well. I need to know the following: 1) Will Samba work over the internet? 2) Can Samba connections be encrypted or

hi, I'm going to be setting up Samba with a WAN and VPN. On one end of the network (my end) it will be Samba on a Linux box and some NT and 98 PCs. On the other end of the WAN it will be Windows only. I'd like to know if we need to be able to route anything other than TCP packages. Like NetBIOS or something else Windows may use. Thanks, J.

Hi all, I'm new to Asterisk and I was wondering if the following setup can work. If it can how would I go about setting it up: Phone------PBX------Asterisk Server------Cisco Router | | WAN

Hi List, Does anyone know of a good dual wan router that can handle SIP well and can failover between connections if there is a SIP issue on one of the lines (meaning there still is a connection however there isnt enough bandwith or sip packets arent going thru etc.) ? Thanks. Dovid -------------- next part -------------- An HTML attachment was scrubbed... URL:

Gus: I guess my primary point of confusion is that the non-vpn LAN ip addresses are duplicated in each cluster. So within a cluster, the LAN addresses are unique. But when you look at 2 clusters, 2 different servers share the 10.99.0.11 address. So that is why I created a VPN for inside the cluster on the LAN interfaces using the private 10.0.1.xx range. THen, I created a separate VPN on the

Brevard County is about 70 miles long and 20 miles wide. We have many small sites around the County that will eventually have their current servers replaced with Linux/Samba servers. We've been successfully running a test Samba server since January and I'm convinced of it's stability and usefulness ... good work Samba Team and Linux in general. Other than for the test Samba server,