similar to: IPSEC VPN to VPN firewalling problem

I have a zone "rw" defined as tun0 in interfaces. From that zone, pings to zone "loc" succeed but pings to remote networks (On IPsec VPNs) are rejected in the all2all chain. From my point of view, these pings should be in the rw2cctc chain. (rw to cctc is ACCEPTed in policy.) I must have a hole in my config, where would it be? Thanks, A.

Hi, I''m asking my question here, because I could not find any answer to my problem, but I''m affraid shorewall is not the one to blame. First of all I''m using shorewall version 2.0.15 on two linux box. I set up an ipsec tunnel beetween those 2 boxes to be ables to connect 2 not routable subnetworks. Here is my network topology: 10.66.17.0/24 - 10.66.17.1 = eth0

Dear list, I''m running Shorewall on a dedicated Fedora 7 box. Shorewall is working well as an office DSL router (dynamic IP) with loc and dmz zones. I am now trying to configure IPSec to connect a VPS, "casp", with a static IP to both the firewall and to the loc network behind it. The host to host SA works fine. However, pings from "loc" to "casp" can be

Hi everyone, First of all, this is my first post in this ML, so I''m not sure that this is the right place for my question (please don''t shoot me down ;)). For the record, I''ve been reading and using LARTC for almost 3 years now, and it''s a great help for anyone who wants to learn linux networking. My problem: I want to setup a tunnel for the following

https://bugzilla.mindrot.org/show_bug.cgi?id=3655 Bug ID: 3655 Summary: Default ObscureKeystrokeTiming makes X forwarding really slow Product: Portable OpenSSH Version: 9.6p1 Hardware: Other OS: Linux Status: NEW Severity: normal Priority: P5 Component: ssh

I have a North American BRI configured as National ISDN (NI-1) on an SBC (Nortel?) switch. SBC calls this "FastTrak ISDN", and it's surprisingly inexpensive -- less than two POTS lines. I've been trying to find an inexpensive PCI interface solution to connect this to Asterisk as voice lines. I prefer ISDN BRI over POTS lines because of the improved signalling, fast dialing,

Hi This is my 1st time here so please be gentle. I have encountered one problem since upgrading from 2.0.19 to 2.2.9 which has me beat. The system provides sasl auth services via inet to a postfix 2.11 system. Since the upgrade postfix complains of no sasl methods available. The same dovecot configuration is used on both versions. Now I get these results looking at the inet connection Version

Hi When I start shorewall, the multicast stream is stopped. My config: Windows VLC Client-----eth0:192.168.254.1/24--fw---eth1:191.168.254.254/16-------------------------Linux VLC Streaming server 192.168.254/24 lan wan (but it''s really a internal lan !) 191.168.1.21/16 on the FW/shorewall route add -net 224.0.0.0 netmask

Hi, I'm in the process of setting up Asterisk in a SOHO environment using ISDN for trunking. More specifically a BRI 2B+D circuit where one SPID is used for the business and the other is used for personal. The circuit already exists, but is presently being interfaced to POTS phones via a TA. This configuration is not very common in the US, but we are fortunate that our LEC offers it price

Hi, I'm trying to set up exim (4.83) as a submission server, and need to set up the dovecot authentication in exim. I'm having an issue with that (documented at <https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=756258>) The problem is that exim doesn't follow the handshake as described here: <http://wiki2.dovecot.org/Design/AuthProtocol>. The wiki page says that the

Hi There, Ive taken a look at this and cant quite figure out what is going on here. I have tested all the SQL permissions, and also changed the unix_listener auth-userdb mode to 0666 (as instructed elsewhere to try and solve this issue), but cannot seem to work out what the issue is. Would someone be able to please point me in the correct direction here? Output of log + dovecot -n via this

Dear R-Help listers, I am trying to estimate an proportional odds logistic regression model (or ordered logistic regression) and then make predictions by supplying a hypothetical x vector. However, somehow this does not work. I guess I must have missed something here. I first used the polr function in the MASS package, and I create a data frame and supply it to the predict function (see below):

add new virt-diff tool Signed-off-by: Wanlong Gao <gaowanlong at cn.fujitsu.com> --- Hi Rich, It can work now, please give some comments. ;) Cheers, Wanlong Gao cat/Makefile.am | 20 ++- cat/virt-diff.c | 525 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ po/POTFILES | 1 + 3 files changed, 545 insertions(+), 1 deletion(-) create mode 100644 cat/virt-diff.c diff

Hello, I'm wondering is there any possibility to make host:8000/status.xsl avaiable as xml file. Yes, I know, there is host:8000/admin/stats.xml , but there I had to type a password. I'm trying to do 'we are playing the xxx song now' on the main website. Has anybody make such a thing already ? Greets, spalek -- spalek2@ptssa.pl GCM dpu s: a--- C++ UL++++ P+ L+++ E--- W+ N+ K-

FYI, I've added a crossfader to the ices0 trunk in subversion: http://svn.xiph.org/icecast/trunk/ices0 It requires LAME support (of course). To use it, either pass -C <secs> on the command line, or add a <Crossfade>secs</Crossfade> node to the Playlist section of the config file. Reencoding must also be enabled on your stream. NOTE: the crossfader can't resample, so all

[ -netters, please Cc me or security@ with replies. ] I'm running into trouble integrating dynamic racoon-based IPSec into a network with ipfw and natd. I need to be able to allow VPN access from any address from authenticated clients. I've got the dynamic VPN working, with racoon negotiating SAs and installing SPs, but the problem is that I can't tell whether an incoming packet on

Hi, Some time ago my dovecot started to become BUGgy: Evertime I restart the system, dovecot is started but I cannot login. I see the following information in the logs: Jul 4 04:04:36 mail dovecot: auth: passwd-file(user,127.11.91.218,<nfkQjFT9vwCADFra>): no passwd file: /etc/dovecot/imap.passwd Jul 4 04:04:36 mail dovecot: auth: Error: BUG: Authentication client sent unknown handshake

Hello List, I am running an Ubuntu 14.04.5 LTS Server with Dovecot 2.2.9, only local filesystems and authentication done via mysql backend. Server is a Strato Virtual Server running 2.6.32-042stab120.11 #1 SMP Fri Mar 10 16:52:50 MSK 2017 i686 i686 i686 GNU/Linux Sometimes I see errors in the log like this for one user: Error: Transaction log /var/vmail/

Hello All, Has anyone configured bri to answer for only one msn? In essence, when the primary is busy I want to have channel 2 ring. I am using an eicon diva server bri I know I saw it in the windows interface, but don't see it in the linux setup. Regards, Greg

Hi, Heiko Schlittermann <hs at schlittermann.de> (Mo 21 Nov 2016 11:50:13 CET): > a) Routing stage > You need to interact with the user database dovecot uses. > Either you access the user database directory (flat file, LDAP, > whatever) or you use the ${readsocket?} feature of Exim to talk to > dovecot. The readsocket trick doesn't seem to work anymore. Using $