similar to: Slow link/Capacity changed + Kernel OOPS... possible hardware issues, ideas?

Hi Everyone! I've been trying to get my Nvidia 9800m GT working with the latest nouveau drivers with no luck so far. First of all I'd like to mention that this is a weird card as it is an SLI in one piece of hardware (not 2 separated cards). It came with my Dell XPS M1730 laptop. I know SLI is not currently supported and _I don't want_ to use SLI, I just would like to use one of

Hello, since weeks I was ignoring this warning at my CentOS 5.6/64 bit machine - /etc/cron.weekly/99-raid-check: WARNING: mismatch_cnt is not 0 on /dev/md0 in the hope that the software RAID will slowly repair itself. I also had executed "echo 100000 > /proc/sys/dev/raid/speed_limit_max" on the advice from the mailing list. But now my web server is offline - I had to boot

dmesg output after a resume from a suspend. the device in question was /dev/sdb mounted on /home. after a device failure to resume properly, the link is then reset by the kernel but comes back as /dev/sde. /dev/sdb disappeared entirely, and is now referred to as sde. attempted to remount rw of sde, seemed to succeed, mount/mtab said that it was rw now but i couldn''t write to the volume

Does anybody please have any experience with the following CentOS 6 warnings in logwatch? WARNING: Kernel Errors Present ACPI Error (psargs-0359): [ ...: 1 Time(s) pci 0000:00:01.0: PCIe errors handled by OS. ...: 1 Time(s) pci 0000:00:1c.0: PCIe errors handled by OS. ...: 1 Time(s) pci 0000:00:1c.5: PCIe errors handled by OS. ...: 1 Time(s) pci 0000:00:1c.6: PCIe errors

Dear all, I have running a DOM-0 on debian squeeze with the most recent kernel: Linux 2.6.32-5-xen-amd64 #1 SMP On 30% of all reboots the system hangs and only a reset helps. acpi=off as an additional kernel parameter solves this problem, but the usb keyboard of the installed ip-kvm is not found then. with acpi=off Ican find a lot stuff like: [ 7.098747] uhci_hcd 0000:00:1d.2: UHCI Host

Dear CentOS users, I run a small Facebook game at a CentOS 6.3 machine with PostgreSQL 8.4.3 + few PHP scripts + 1 Perl daemon and even though the server worked ok, I've suggested my users to double up the RAM to 32 GB and they have collected money for that. Now my problem is that I don't know, which knob to turn and how to really use the additional memory. Below is my top output at the

Hi. While testing subvolumes in btrfs on 2.6.32.9, I hit a kernel BUG: [ 492.164012] kernel BUG at fs/btrfs/inode.c:4365! The commands to reproduce this bug are as follows: # mount -t btrfs /dev/sda5 /scratch # btrfsctl -S subvol /scratch # date > /scratch/date # ln /scratch/date /scratch/subvol/ ln segfaults, and the bug above is found in dmesg. Subsequent accesses to the subvolume

Hellow all, i need help to fix this bug: ACPI BIOS Bug: Error: A valid RSDP was not found (20120711/tbxfroot-219) Because of this first errors i get this after, and it causes don''t work USB ports and some PCI cards on the system: can''t find IRQ for PCI INT A; please try using pci=biosirq Kernel: 3.6.1-xen self compiled (work perfect without xen multiboot) Xen Version: 4.2

My kernel crashed for some other reason, and now I can''t mount my btrfs filesystem. I don''t care about the data, it''s backed up. I''ll compile a 3.5 kernel, but is there any info you''d like off that filesystem to see why btrfs is crashing on mount? Marc [ 313.152857] device label btrfs_pool1 devid 1 transid 20769 /dev/mapper/disk1 [ 313.171318]

Package: xen-hypervisor-3.4-amd64 and linux-image-2.6.32-5-xen-amd64 Version: 3.4.3-1 and 2.6.32-15 Hello all, GRUB-PC does not automatically populate Xen related parameters in /boot/grub/grub.cfg so I added them manually (see below). All the packages involved on my Dell PowerEdge R710 running Debian GNU/Linux Squeeze AMD64 are from the Squeeze repository. There are four (4) 1TB SATA HDD

I'm trying to figure out why 2 machines have a "hard I/O lock" on the HDD when running EL6. I have 4 identical machines, all were stable with EL5. 2 work great with EL6, 2 do not. I've checked momtherboard BIOS versions and settings, SAS controller BIOS versions and settings, they are the same between the working and non- working systems. When booting a non-working system,

Hello. Minimal testcase for my problem: No X running, just a TTY. Use of the nouveau kernel module as of today (or any older) with an up to date vanilla kernel. Hardware: DELL Vostro 3500 with Geforce 310M. To suspend to ram I use this script, as suggested in Documentation/power/s2ram.txt: #!/bin/sh sync echo 1 > /sys/power/pm_trace echo mem > /sys/power/state When I try to suspend to

Hi, I took this issue to the Fedora forum initially, but no-one there has been able to offer any guidance, so I have decided to come to the nouveau community directly. I was running a KDE desktop under Fedora 21 successfully, including the ability to use a direct text login on an older card (GXT 560 Ti) with an entirely stock Fedora, fully updated. I simply replaced the old card with an

Howdy! I've been doing a lot of troubleshooting, and haven't arrived at a solution yet. Kernel log attached. VBIOS also attached. Ubuntu 19.10 $ uname -a Linux joyful 5.3.0-26-generic #28-Ubuntu SMP Wed Dec 18 05:37:46 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux $ dpkg -l|grep nouveau ii libdrm-nouveau2:amd64 2.4.99-1ubuntu1 amd64

Hi all, I'm getting frequent system crashes (every few hours or so) and it seems that the nouveau driver is causing the issue (dmesg output below). I see it with both v5.2.8 and the v4.19 LTS kernel. Sometimes the system completely freezes and sometimes seemingly just the nouveau driver goes down. The screen freezes and colours stream across it. Often after I reboot the BIOS logo is mangled

Trying to debug a database server getting cpu softlocks causing SSHD to hang and not let anybody log in. Figured that a good first step would be to get some kernel dumps when the problem occurs. According to what I read at the following web site, I can get dumps for softlock problems too. Here's the site: http://blog.kreyolys.com/2011/03/17/no-panic-its-just-a-kernel-panic/ Using a

Hello, I just upgraded from Xen-3.3.1 to Xen-4.0.0. System is Gentoo, Hardware is DualCore AMD Athlon, 8GB RAM. The kernel was upgraded from OpenSUSE 2.6.27.29-0.1.1 to Gentoo-2.6.32-xen- r1. The first boot failed with an OOM error during kernel/initrd load, so I adjusted the dom0_mem option and had to increase it''s avalue from 256M to at least 400M until the dom0 could boot. At all

Hi there, with the latest snapshot of linus tree, i see a stack trace and my system does not start X! Maybe someone finds this useful! (3.11 is working like a charm) BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) PGD 24eaa0067 PUD 24e7ac067 PMD 0 Oops: 0010 [#1] PREEMPT SMP Modules linked in: bnep snd_hda_codec_hdmi

Hi, I have a system based on a Supermicro X8DTH-i motherboard and a Xeon E5506 CPU. It was previously running Debian lenny with xen-hypervisor-3.2-1-amd64 (3.2.1-2) / linux-image-2.6.26-2-xen-amd64 (2.6.26-29) without incident. I upgraded it to Debian squeeze, with xen-hypervisor-4.0-amd64 (4.0.1-4) / linux-image-2.6.32-5-xen-amd64 (2.6.32-45) and now it does not complete a boot of the dom0

Am 25.12.2015 um 18:43 schrieb Pierre Moreau: > Hello, > > Maybe my e-mail client is messing with me, but I couldn't find any dmesg output > attached to your e-mail. Could you please try to attach it again? > > By the way, since you have a Kepler, you should try booting with > "nouveau.War00C800_0=1". That workaround is enabled by default in 4.4-rc5 > (IIRC),