similar to: Intel P35 / quad-core support for HPC applications

I have 2 new boxes that I cannot use yet because of problems supporting these newer chipsets in 5.1. Does anyone know when the CD version of 5.0 x86-64 that has support for these chipsets be available on any on a Centos mirror? Has the support for these chipsets been added to yum yet? Here are my latest results with these chipsets and Centos 5.1 1. Asus P5K, E6850, P35 Chipset: Does not

Can someone make a recommedation as far as best chipset for Centos 5.0 or 5..1 using a Q6600 series CPU?with chipsets that have onboard VGA?? From poking around it looks like the G33 and P35 are not supported or have problems until the newer 2.6.22 kernel (the?iso's appear to be earlier than that, think it was?.18)?? So I am considering boards with the Intel G965 chipset but not sure if is

Had to replace dying cpu and mobo, so also replaced IDE with new SATA drive. Installed from latest ISO onto SATA and can't get networking to lease an IP address from my ISP (Comcast). The network utility always comes up with a private address (192.168.0.2) instead of Comcast IP. To add to confusion, if I boot into old IDE drive, I get proper network connection to internet, but lose my

????????????. ????? ??? ????????? ???????? ?? ????. ?? ??????? ?????????? ? ????????? ?? ????? ??????????? ?????? ????? ??? ???????? Gigabyte GA-P35-S3, ??????? ????? ?????????? ??????? ???????? Realtek RTL8111B/8111C. ??? ???????? ?? ????? ?????????? ?????????? ??????????? ????, ?? ????? ?????? ?????? ?????? ?????????? ?????? ?????????. ?

Hi, I'm trying to get a system with an Intel G33 video chipset in it (Supermicro C2SBA) working with the Intel driver but I'm not having much luck.. I took the patch from Hiroshi Nishida and added the G33 PCI ID's for it now I get agp/i810 attaching to it.. Matched G33 Matched for Intel G33 IG SVGA controller Matched G33 Matched for Intel G33 IG SVGA controller agp0: <Intel G33 IG

Last year to get motherboards with the G33 chipset with SATA working with Centos I had to either use David Harbic fixes or use Fedora 8 since it had the later 2.6.25 kernel. I no longer see David's fixes available and also see in the 5.2 release notes "update SATA driver and infrastructure". Did Redhat finally incorporate fixes to full support the new G33 chipset and SATA? I have

Been running rock solid servers on Centos 3 and 4 for years but equipment is starting to die so it is time. I was thinking along the lines of an Intel Q6600 on an Asus P5K-VM mobo with the new G33 chipset utilizing SATA. Is anyone having success with this board or any of the G33 chipsets where I am not going to run into all kinds of install problems? I see these other threads of install

My PC has built-in intel G33 graphics, which I'm trying to get to work in something better then vesa. Following the instructions in http://lists.freebsd.org/pipermail/freebsd-stable/2008-January/039638.html I have compiled and installed the driver and kernel modules from the git trees for drm and the xf86-video-intel driver from today. I also patched agp_i810.c to remove the comments from

I am trying to install R-2.3.0 on a 64bit linux box and encounter several error during the make step. I'd appreciate any help. Error messages follow: [root at calculon R-2.3.0]# make make[4]: Entering directory `/state/partition1/apps/packages/R-2.3.0/src/modules/lapack' gcc -shared -L/usr/local/lib64 -o libRlapack.so dlamc.o dlapack0.o dlapack1.o dlapack2.o dlapack3.o cmplx.o

Dear, I''m looking to get Xen running on a system that (afterwards) seems a bit too new. The board has the Intel G33 chipset with the Intel ICH9 southbridge. This chipset is NOT supported by kernel 2.6.18 which ships with Xen 3.1.2 (and Debian Etch). So the question is: * What version of Xen to install to get going? Should I choose unstable? * What distribution will be the easiest to get

Hi folks, I've been trying to get shadow copy / previous versions working under sernet-samba-ad-4.1.6-7.el6.x86_64. I cannot see where I am going wrong. I have: [global] workgroup = COMPANY realm = COMPANY.LOCAL netbios name = DC server role = active directory domain controller server services = s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl, winbind,

I just installed CentOS 5.1 on a Dell Vostro 200 (Intel G33) which has a Sunix PCI-Express (x1) 8-port RS-232 card installed. For me it looks like only 4 ports are recognized, but I'm not sure if it's even working with those 4. >From 'dmesg' I see this: ... Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19

Hi all, Trying to install 5.0 or 5.1 (i386 or x86_64) on a new system from an install DVD. As soon as the installer launches anaconda, the screen shuts off and from this point I'm unable to switch to any other tty. This is an Intel core2duo machine on an Intel P35 chipset motherboard, Geforce 8400GS video card connected to a BenQ 20" widescreen LCD. Any ideas what could cause

Some background - I have a couple of NetBSD (i386) boxes and CentOS 5 boxes that I want to virtualise and I''m trying to work out which OS will be most suitable as the dom0. I have a desire to run at least RAID1 and ideally ZFS mirroring on the dom0 so I can have all the domU''s not have to worry about disk redundancy etc. My hardware : I have a brand new Intel E8200 core2duo and

Hi! I''ve got a motherboard (Gigabyte GA-G33-DS3R) where the Ethernet port has been broken. I''ll buy a new motherboard, but wants to keep all my other equipment (CPU, Memory, TV-cards etc). The requirements/wishes on the new motherboard are 2 Ethernet ports and 2 PCI slots. It would also be good if it would support VT-d. I''ve found two boards that would fulfill my

Dear Colleagues, I have a dataframe with variables: [1] "ID" "category" "a11" "a12" "a13" "a21" [7] "a22" "a23" "a31" "a32" "b11" "b12" [13] "b13" "b21"

Dear List, This is just a programming problem which i cannot seem to figure out. I am trying to get a set of power from a test (say, kolmogorov smirnov) out of a distribution (say, G-K distribution) as follows. I am trying to reduce to pain of writing the whole set of data points (p# below) using "for" loop. However, I seem to have some problem in it as the output "M" does not

Hi, One of my disks, partitioned into a single btrfs partition, is showing media errors. The problem is that these errors lead to kernel panic from btrfs - that make the filesystem unusable until reboot - and therefore it is very hard for me to do a full backup of the data prior to changing the disk. My current kernel is 3.2.0-8-generic from Ubuntu/precise (based on linux 3.2-final) but I

Hello, I'm trying to complete a minimal install of Centos 5.1 x86_64 on a Core 2 Duo 2.2Ghz running on an Asus P5K-VM motherboard - yes, this means it's the G33 chipset. (you can stop laughing now) I'm installing to two SATA-disks setup with Software Raid-1. I've installed an Intel NIC that is detected during install and I'm able to complete the install itself - mind you I

I used to use a hot-plugable PATA-CDROM drive on my Computer (Samsung P35 laptop). To change drive I use a script which at the bottom of its heart uses Code: echo "scsi remove-single-device 1 0 0 0" | sudo tee /proc/scsi/scsi and Code: echo "scsi add-single-device 1 0 0 0" | sudo tee /proc/scsi/scsi commands in oder to let the OS being aware of the changed drive. This