similar to: AT-2972SX

Greetings - I had a logical volume that was running out of space on a virtual machine. I successfully expanded the LV using lvextend, and lvdisplay shows that it has been expanded. Then I went to expand the filesystem to fill the new space (# resize2fs -p /dev/vde1) and I get the results that the filesystem is already xx blocks long, nothing to do. If I do a # df -h, I can see that the

Hi all; I have a custom iproute2 table and a few rules to go along with it (CentOS 5) -- I have added the table to /etc/iproute2/rt_tables. if-up and friends doesn't seem to handle this real gracefully. How are those of you out there doing something similar managing this customization? I don't really want to muck with /etc/init.d/network or the if-up scripts to avoid breaking upgrades.

Greetings. I am trying to create a 10TB (approx) ext3 filesystem. I am able to successfully create the partition using parted, but when I try to use mkfs.ext3, I get an error stating there is an 8TB limit for ext3 filesystems. I looked at the specs for 5 on the "upstream" vendor's website, and they indicate that there is a 16TB limit on ext3. Has anyone been able to create

I have a question that has been puzzling me for some time ... what is the reason RedHat chose to go with btrfs rather than working with the ZFS-on-Linux folks (now OpenZFS)? Is it a licensing issue, political, etc? Although btrfs is making progress, ZFS is far more mature, has a few more stable features (especially Raid-z3) and has worked flawlessly for me on CentOS-6 and Scientific Linux-6.

Hi all, I'd like to get added to the EditGroup for wiki.centos.org and perhaps projects.centos.org. I'm interested in adding content periodically throughout wiki.centos; most likely in the HOWTO areas, but am happy to do reorganization and cleanup as-needed. On the projects side I'd like to create a project for the i586 on CentOS 5 section. Thanks, Ray -- Ray Van Dolson <rayvd

On a custom compiled Linux 2.6.13 kernel... # tc qdisc add dev ppp145 handle ffff: ingress # tc filter add dev ppp145 parent ffff: protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate 384kbit burst 10k drop flowid :1 RTNETLINK answers: Invalid argument This works fine on a CentOS machine and my Fedora Core 2 box with default kernel. I''m trying to figure out what is missing in the

Hi Sanjoy: >> Now in the above CFG %val can be folded to 10, but in reality you need >> a PHI of 10 and 20 Quick answer: folding %val to 10 is OK, but, I would prefer it to be 'undef' or even catch it in the verifier as it is a programmer/frontend error. Details are in the second half of my reply. I would like to start with the thought experiment you suggested, as it might

Hi Sanjoy, >> I'm not familiar with fiber-type APIs, but I assume fiber_fork is like >> setjmp, in that it can "return twice"? Yes, user-mode stack switching API are somewhat similar to setjmp. Here are links to a doc page and implementation, just in case you are curious: http://www.boost.org/doc/libs/1_59_0/libs/context/doc/html/context/context.html

Please forgive the (almost?) OT post. (and the fact that I need a clue-bat) We've got a situation at one of our sites where a construction crew is likely to dig up our conduit which houses some data fiber and one pair of fiber used to tie a Definity 3gsi at a small office building to the rest of the phone system (school district). We're using a pair of Aeronets to the data network stays

Hi ! As some of you might know, Apple has discontinued it's xServes server as of january 31st 2011. We have a server rack with 12 xserves ranging from dual G5's to dual quand-core xeon lastest generation, 3 xserve-raid and one activeraid 16 TB disk enclosure. We also use xSan to access a shared file system among the servers. Services are run from this shared filesystem, spreaded

As we have fiber channel, and we have fiber connections, sometimes direct p-to-p, where we could run it into our fiber channel switch, and share a disk array over hundreds of feet, to hundreds of miles, but where servers wouldn't be able to talk via fast enough network connection, does (or will) ocfs2 support a mode where there is no network connection needed, and all voting, and cluster

Team I have a Dell PowerEdge R720xd, with the Broadcom NetXtreme bcm5720. I found the following thread: http://forums.freebsd.org/showthread.php?t=31769 I find I am unable to use the NIC's (there are 4 on the server). When we put a cable into it we get a "watchdog timeout -- resetting" error, and the machine will pause for 5 or so seconds. IP may or may not come up randomly.

Hi! We use Windows tftp-servers (so I dont think switching now would be an alternative). But I can try to suggest it. More specific, vendor id of the mac address, is what I want to be able to "choose" (if match) which bootmenu to display. Like all broadcom NICs we have would boot the undionly.kpxe "menu!! (I am having some trouble with broadcom (PCI fiber) and iPXE :) And the

I am relatively new to R, but am intrigued by its flexibility. I am interested in quantile regression and quantile estimation as regards to cotton fiber length distributions. The length distribution affects spinning and weaving properties, so it is desirable to select for certain distribution types. The AFIS fiber testing machinery outputs a vector for each sample of type c(12, 235, 355, . . .

Hi, I'm new to the list, so forgive me if I'm asking several naive questions that have been answered a dozen times before. I have RHAS with kernel version 2.4.9-e.10smp, running ocfs-support-1.0-2, ocfs-tools-1.0-2, ocfs-2.4.9-e.10-smp-1.0-2. I have Oracle 9iR2 RAC up and running on an IBM fiber channel architecture. I find it to be extremely slow compared to other stand alone

I'm experiencing similar problems with a 3C996-T under 4.8-REL. In particular, connecting a 4.8-REL machine to a 5.1-REL machine leads to some interesting situations: I can do simple pings across the link, but ssh fails, and heavy pings crash the 4.8 machine. Similarly changing the interface configuration with ifconfig tends to crash the 4.8 machine (mtu, link0, up/down, etc). The

I found some ancillary information that seems to indicate that there is a driver that will allow a D-Link DGE-550SX Gigabit fiber NIC to work under FreeBSD 4.x. Can anyone confirm or refute this, or provide additional information? If the NIC is not supported, is there a recommendation for a gigabit fiber NIC that works well under 4.8? Thanks, Steve

Hi all, I found a article about Hyper-V virtual Fiber Channel, I think this will make Failover Cluster work if KVM has the same feature. http://technet.microsoft.com/en-us/library/hh831413.aspx Hyper-V uses NPIV for virtual Fiber Channel, I have read some article about KVM NPIV, but how can I config it with libvirt? Any body can show me some example? On Wed, Aug 14, 2013 at 2:33 PM, Timon Wang

I have a recently installed Mellanox VPI interface in my server. This is an InfiniBand interface, which, through the use of adapters, can also do 10GbE over fiber. I have one of the adapter's two ports configured for 10GbE in this way, with a point to point link to a Mac workstation with a Myricom 10GbE card. I've configured this interface on the Linux box (eth2) using

Hi there, I have one server acting as a iscsi target running windows storage server r2 sp2 and the other server is running centos as an initiator. They are connected to a switch over a 1Gbit ethernet connection. the target is a Dell NF600 and the server running centos is a Poweredge R900. We want to move this configuration to a FC based installation using a Dell QLE2462 HBA (this is the hba we can