Displaying 20 results from an estimated 1000 matches similar to: "Tripp-lite SMART1050SLT"
2011 Jun 28
1
Windows 2.6.0-1 usbhid-ups driver infinite loop on USB disconnect
I was doing some testing with the 2.6.0-1 beta Windows installer and a
Cyber Power CP1350PFCLCD UPS, and ran into an infinite loop in the
usbhid-ups driver if the UPS is lost on the UPS bus. This is on a
Windows XP SP3 system. USB device access is via libusb 1.2.4.0
(driver mode, not filter) in case that matters.
Everything seems to work just fine so far while the UPS is connected
(so kudos,
2016 Sep 15
0
How to get started (Windows)
On Sep 14, 2016, at 9:29 AM, Jeff Bowman <jeff.bowman at intexx.com> wrote:
> C:\Users\Admin>upsc ups at localhost
> battery.charge: 100
...
> ups.status: OL
If ups.status follows the state of line power, the driver is working (and upsc talks to upsd, so that connection is working as well).
> So this all represents significant progress. But we're not out of the woods
2010 Jan 31
1
smart1050slt by tripp lite
I have 2 SmartUOS1050SLT's that apparently protocol 3004, has there been
any progress on getting these units supported under nut? I am running
version 2.4.1, and get the following output when starting the driver.
#lsusb
Bus 005 Device 002: ID 09ae:0001 Tripp Lite
# upsdrvctl -DDDD start
Network UPS Tools - UPS driver controller 2.4.1
Starting UPS: tripplite
exec: /lib/nut/tripplite_usb -a
2010 Jan 31
3
smart1050slt by tripp lite
Original Message
>I have 2 SmartUOS1050SLT's that apparently protocol 3004, has there
>been
>any progress on getting these units supported under nut? I am running
>version 2.4.1, and get the following output when starting the driver.
>#lsusb
>Bus 005 Device 002: ID 09ae:0001 Tripp Lite
># upsdrvctl -DDDD start
>Network UPS Tools - UPS driver controller 2.4.1
2016 Sep 14
2
How to get started (Windows)
> I suspect you will want the newer version for production (there was some
> issue regarding the popups when certain events happen), but let's get this
> version working first before changing another variable.
Appreciate that. Agreed.
> For reference, I think the source code to NUT.exe is here:
> https://github.com/networkupstools/nut/blob/Windows-v2.6.5-
>
2012 Nov 08
1
APC Back UPS ES 700
Hello!
I have tested APC Back UPS ES 700 and NUT 2.6.5-3 a few days ago and I have
got some news.
This device is detected by nut-scanner as:
[nutdev1]
driver = "usbhid-ups"
port = "auto"
vendorid = "051D"
productid = "0002"
product = "Back-UPS ES 700 FW:829.D2 .I USB FW:D2 "
serial =
2012 Aug 30
1
Data stale and Back UPS ES
Hello!
I tried NUT 2.6.5-1 (Windows port) with my APC Back UPS ES. It seems I have
configured NUT properly, nut-scanner found my UPS:
[nutdev1]
driver = "usbhid-ups"
port = "auto"
vendorid = "051D"
productid = "0002"
product = "Back-UPS ES 525 FW:851.t3.I USB FW:t3"
serial = "8B0745R23575
2016 Sep 13
2
How to get started (Windows)
> On Sep 11, 2016, at 3:37 PM, Jeff Bowman <jeff.bowman at intexx.com> wrote:
> >
> > Using subdriver: APC HID 0.95
> >
> > ...and then hangs for 45 seconds before returning to a command prompt. No
> UPS hardware information is printed.
>
> It can take about that long to read the descriptors. The non-Windows NUT
> drivers will print that message,
2006 Feb 08
3
Tripp Lite is up to no good
Well, I have good news and bad news.
I have a Tripp Lite SmartPro UPS attached to a Linux server running Ubuntu
5.10, and I'm running the just-released nut 2.0.3.
I had error -71 from the UPS, which Charles Lepple correctly called out as
a likely cable problem (thank you, Charles.) The cable provided with the
UPS by Tripp Lite was just plain bad. Not too long, mind you- defective.
I
2005 Sep 15
2
Driver for Tripp Lite SmartPro SLT
I have a new SMART1050SLT Tripp Lite UPS that both tripplite
and tripplitesu drivers hate. Both simply time out with a "can't
find" message.
Does anyone know about the SmartPro series?
2015 Aug 16
0
Anyone still have a Tripp-Lite 3004-protocol USB UPS?
I was cleaning up some digital detritus when I ran across an old SVN
branch for the proprietary Tripp Lite 3004 USB protocol (the non-PDC
variety). It looks very similar to the binary 3005 protocol, which has
been added to NUT, but I'd like to have someone sanity-check things
before we claim compatibility.
Any volunteers?
I'm not sure what models this covers, except maybe the
2016 Sep 11
4
How to get started (Windows)
> On Thu, 8 Sep 2016, Jeff Bowman wrote:
>
> > (Note: running
> > 'upsc ups at localhost' echoes only a blank line to the screen, as do
> > both 'upsmon' and 'upsd.')
>
> Something is wrong here. Is the daemon upsd running? On a Unix/Linux
> system, the command ps aux | grep ups gives the report
>
> upsd 3196 0.0 0.0 13228
2010 Mar 09
1
Tripp-Lite SU2200XLA problem
Hi,
I kludged support for the TrippLite SU2200XLA into nut-2.4.3 as follows:
--- ./drivers/tripplite-hid.c.0 2010-03-03 15:53:20.000000000 -0500
+++ ./drivers/tripplite-hid.c 2010-03-03 15:53:40.000000000 -0500
@@ -81,6 +81,8 @@
{ USB_DEVICE(TRIPPLITE_VENDORID, 0x4002), battery_scale_1dot0 },
/* e.g. TrippLite SmartOnline SU1500RTXL2ua */
{
2016 Jul 19
0
windows beta installer
Hi
I have installed nut 2.6.5-6 using the msi installer, but during the install popped up a box asking me to manually install libusb0.dll
The msi package doesn't seem to contain the libusb0.dll, the question is, where do I get it from?
Thx
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2016 Jul 20
0
Nut-upsuser Digest, Vol 133, Issue 8
I am also having Windows Issues, Refer back to the post I received
from Charles
Lepple.
He gave me the details on how to resolve the missing USB driver issue -
Although I would be very interested in what you find as I have not found
time to revisit the issue yet..
----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 19 Jul 2016 17:28:51
2012 Sep 17
1
New intermediate Windows binaries release - 2.6.5-2
?Hello,
There is a new intermediate Windows binaries release available at :
http://www.networkupstools.org/package/windows/NUT-Installer-2.6.5-2.msi
This fixes three regressions:
- upssched was not working
- Event logging was not working (unless for NUT service binary itself)
- usbhid-ups was not working with Back-UPS ES ups.
Feedback is highly appreciated.
Regards,
Fred
--
Eaton
2016 Jul 14
2
Windows Version not working --
Good evening,
Hoping someone can point me in the right direction..
I downloaded and installed the 2.6.5-6 Windows MSI and it installed
fine, although I nee to also get a libusb0.dll.
Connected USB to a Triplite, I could go to the Devices and Printers and
see the USB installed.
But no matter what I did I could not get nut to work. I tried various
commands, and got various errors.
2017 Aug 14
2
Windows Binary for 2.7.4
Looking at the project site the latest Windows Binary is a few back -
2.6.5.6
Has any one built a more recent version that they can upload and update the
Project site ?
Looking for Windows 7 / Windows 8, not running Windows 10 on any of my tool
Laptops and
I need to check some battery packs and overall status on a series of UPS
units in shelters, The build
2.6.5.6 gives my grirf in a number of
2016 Sep 08
3
How to get started (Windows)
I've been able to get the latest Windows port installed on my Hyper-V 2012 R2 instance and start the service.
But as I'm an absolute beginner I'm not sure how to proceed further. I've browsed the archives, but discussions here tend to assume at least an intermediate level of understanding; thus it's still quite a bit over my head. Your patience and slow explanations are
2012 Oct 01
1
Tripp-Lite INTERNET525U
Test machine: Windows 7 Pro x64, NUT 2.6.5-3
UPS model: Tripp-Lite Internet Office UPS (INTERNET525U)
I needed a UPS and I had this old, but lightly used Tripp-Lite in
storage. On the compatibility list I see a (?similar?) INTERNETOFFICE700
using the tripplite_usb driver. But the driver is not liking this
particular model that I have.
I'll be receiving a 3S550 soon, so I'm not