similar to: Dom0 freeze on HVM DomU Windows reboot with VGA passthrough

Aloha! Concisely, I''ve been trying for several days to get VGA/PCI passthrough working. Regarding VGA vs PCI passthrough, I''m not entirely certain of the difference? Does Xen perform a different set of operations when passing through a VGA card versus any PCIe card? I''ve read the wiki and it seems the answer is "yes;" however, when passing through a

Hi all, I have an i7-3770 which has the Intel HD 4000 graphics. I''ve been trying to pass it through to DomU with no success. With a Linux DomU, the i915 module simply will not load because intel_agp is not loaded properly when it cannot find the AGP bridge. ( With a Win7 DomU, it BSODs straight away during the boot with SYSTEM_SERVICE_EXCEPTION. With a WinXP DomU, it got further

James, I''m writing with respect to an issue I''ve observed on a long-running, stable VM with the GPL-PV drivers installed. Running : 0.11 latest, x86 XP SP3 I used "xm block-attach" to add two disks and (without actually configuring/accessing them) I had an automatic reboot due to windows updates. At the same time as the block-attach the domU config was edited to

Hi, During the install of the univention.de-signed GPLPV drivers (gplpv_Vista2008x64_signed_0.11.0.308.msi) on my Windows 7 guest, I get a BSOD "DRIVER_IRQL_NOT_LESS_OR_EQUAL" in xenvbd.sys. Afterwards, Windows won''t start. I''m now trying to do a System Restore. I will try not installing the VBD driver afterwards and see if the others do work. Full BSOD:

Hey, I''ve been trying to get the gplpv drivers working with Windows 2008 R2 64-bit on both a stock CentOS 5.8 install and CentOS 5.8 w/ Xen 4.1.2 from the gitco repos. I''m getting a BSOD shortly after boot up and it can be seen at http://techmonkeys.org/xen/ -- along with the qemu log. Has anyone had success with these drivers and Windows 2008 R2 64-bit? If so, what am I

Hello, I installed the signed drivers from http://wiki.univention.de/index.php?title=Installing-signed-GPLPV-drivers and I ran into a BSOD on a Windows 2008 Server R2 Enterprise domU with a large number of vcpu''s. The BSOD is related to xennet.sys. After some trials I found that it runs fine up to 15 cores. From 16 or more, the BSOD kicks in when booting the domU. The hardware (4 times

I have a strange problem with these drivers. I have a host that has 31 VM''s running on it, all windows. They are running the same template, which has the latest GPLPV drivers installed. The problem occurred today when I went to add the 32nd VM, again from the same template. Now when the VM boots up I get a BSOD. I tried a different template to confirm that it was not template

Hello, I have Xenserver 5.0. When i install a new VM with Windows Server 2003 X64 Standard (R2) and install all windows-updates, it gives me a BSOD when i install the PV 0.9.12pre3 drivers. Steps to reproduce: - Install Xenserver 5 (light/free or Enterprise/trial) - Install a Windows Server 2003 x64 R2 VM from a ISO or CD - Install all windows updates - Download the GPLPV 0.9.12pre3 .exe file

Hi, I''ve noticed that on a Xen cluster with three nodes (two E5620 CPUs and one E5140 CPU) live migration works perfectly in between to two E5620 nodes, but fails to and from the E5140. The error message is about a HVM context not being able to be set. I strongly suspect the use 238 GPPVL drivers, but I cannot uninstall them at this point because someone else needs the server. Could

In the spirit of ''release early, release often'', here''s another binary release... http://www.meadowcourt.org/WindowsXenPV-0.8.8.zip The only thing that''s changed since 0.8.7 is that xennet should work under amd64 again. James _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com

In the spirit of ''release early, release often'', here''s another binary release... http://www.meadowcourt.org/WindowsXenPV-0.8.8.zip The only thing that''s changed since 0.8.7 is that xennet should work under amd64 again. James _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com

Hello. I''m trying to get the lastest GPLPV binary (rev 238) working on an Ubuntu Server host with Xen 4, but I''ve got some problems. The guest is a 64 bit Windows 2008 R2. After enabling test mode and rebooting, installing and rebooting again (with /NOGPLPV) I can see all the Xen devices, but two (out of three) Xen Block Device Driver have an exclamation mark; I don''t

On Sun, Jun 8, 2008 at 3:28 PM, James Harper <james.harper@bendigoit.com.au> wrote: > I''ve just uploaded 0.9.8 to http://www.meadowcourt.org/downloads > > As a reminder, the wiki page is > http://wiki.xensource.com/xenwiki/XenWindowsGplPv > > This release fixes a bug which could be hit under high disk load (high > number of outstanding requests with fragmented

Hello, Introduction ------------ I''m introducing myself since it''s my first post here. My name is Roel Broersma and my company is using Xenserver 5.0, we''re using Xenserver since it was from Xensource. Nowadays it''s Citrix and we have several expensive licenses, paid support and are Citrix certified (Silver Solution Advisor). However, we''re

I''ve just uploaded 0.9.11-pre7. save/restore should be working for 32 bits on both SMP and UP, and maybe for 64 bits although it''s not tested. If someone could test migration it would be much appreciated. The installer seems to not install the drivers under 64 bit environment... but they can then be installed manually. Not sure why at this point.

I''ve just uploaded 0.9.11-pre7. save/restore should be working for 32 bits on both SMP and UP, and maybe for 64 bits although it''s not tested. If someone could test migration it would be much appreciated. The installer seems to not install the drivers under 64 bit environment... but they can then be installed manually. Not sure why at this point.

Trying to install them on Xen 3.4.0, Intel E5345 Processors, Server 2008 64bit. I get the BSoD on boot with the 0x0000007B stop message. I''ve got a bunch of 2003 32bits running on the same host with the 0.10.0.69 drivers and those are totally happy. I tried the boot once with NOGPLPV idea mentioned in another thread, that didn''t do the trick. Ideas anyone? pace

Hello. I have encountered a problem with GPLPV drivers for windows. It is similar (if not the same) as http://old-list-archives.xen.org/archives/html/xen-users/2011-02/msg00709.html Host is running 14 virtual machines with Windows XP. When I''m trying to start 15-th windows VM it crashes with code 0x0000007b. Booting to safe mode or with /nogplpv works ok. 15-th VM works fine if

Hi all, I''ve got a couple of questions regarding the current status of nvidia with Xen, since it is well known that nvidia doesn''t work as smooth at the moment with Xen (comparing to ati). My current goal is to use one nvidia gtx460 card and the onboard intel hd4000 on dom0, and then do passthrough for another nvidia gtx460 to a Windows domU. I know there are patches

This one just fixes the install.bat problem that Jim pointed out. http://www.meadowcourt.org/WindowsXenPV-0.8.3.zip James _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users