similar to: Fast Network Bridge

Hallo Mailinglist:), i used xen 4.1 with xend xm a while. I compiled the unstable 4.2 today and most thinks run fine :). I have only one big problem, the network for my guestsystems. It don't want to work. Hopefully somebody can help me. In Xen 4.1 i only wrote the following line in my questconfig: vif = [ "bridge=eth0,script=vif-bridge" ] And everything works fine. This does not

When I add all interfaces, the internet does not work.... eth0 = interneteth1 = lan ------------------auto eth0 iface eth0 inet static address 192.168.1.254 netmask 255.255.255.0 broadcast 192.168.1.255 auto eth1 iface eth1 inet static address 192.168.0.100 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.254 auto xenbr0 iface xenbr0 inet static

Hello, Where can I find a link (or docs) to *working* network config for xen 4.1.2? My tests (s. below) were not successful. Thank you in advance for any hints. Regards, Mark # --- root@xen411dom0:~# cat /etc/network/interfaces # Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or # /usr/share/doc/ifupdown/examples for more information. auto lo iface lo inet loopback auto bond0

Hi, we''re running 4 xen servers on our network with multiple network cards. During HighLoad we experince degeneration of inbound network traffic through our loadbalancer. I might found a reason for it, in Dom0 dmesg output looks as follows: [1157421.975910] eth0: received packet with own address as source address [1157421.975957] eth0: received packet with own address as source

I normally use the network-script parameter in the '/etc/xen/xend-config.sxp' configuration file to configure network bridges. However, the latest release of Xen4CentOS (which comes with Xen 4.4.1) has xend disabled by default. Can I continue to use network-script without xend? If not what is the recommended method for automatically configuring network bridges with the latest release of

Dear Xen users, I''ve the xen hypervisor installed correctly on CentOS, and it boots correctly too. But the bridged network could not be configured using the commands and steps on the Internet... is it that hard to do in CentOS? Regards, Mohammad Altahat _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users

I have seen those documents, I did not see anything that indicates how _automatic_ bridge configuration could be enabled with xl. For my specific set up I have two bridges (xenbr0 -> peth0 & xenbr1 -> peth1). If I have to configure this manually with ifcfg scripts I will, but if an automatic method is provided or is possible with xl I'd prefer to use that. -Gene On Thu, Jan 29,

Hi, As I see blogs or websites the openvswitch is support XCP and Xenserver. But to support opensource Xen 4.2.1 what should be configure and how to interface with openflow . I have tried using vif-openswitch network script for bridging, while adding datapath using ovs-dpctl add-dp xenbr0 it is added but ovs-dpctl dump-flows xenbr0 it is getting ovs-dpctl: opening datapath (No such device). Can

Hello Everyone, I have set up a xen server with 10 physical network devices using the bridge mode of XEN. This is because I want to split and separate the network traffic for security reasons. Maybe the best way is to use pci back hide. But I want to understand what is going on here. For all testings I have only activated eth[0-3]. My first tests were successful. I have created a VM using

Does anyone know how to install Xen 3 on Ubuntu. Today, apt-get install xen 4.1, but I think Eucalyptus 3.1.2 only work with Xen 3. Thanks Felipe -- *-- -- Felipe Oliveira Gutierrez -- Felipe.o.Gutierrez@gmail.com -- https://sites.google.com/site/lipe82/Home/diaadia* _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users

I want to add the following route command route add -net 192.168.2.0/27 gw 192.168.2.3 via the normal network setup. The result should be the following routing table (the first line): 192.168.2.0/27 via 192.168.2.3 dev xenbr1 scope link 192.168.2.0/27 dev eth2 proto kernel scope link src 192.168.2.4 192.168.2.0/27 dev xenbr1 proto kernel scope link src 192.168.2.3 192.168.1.0/24 dev xenbr0

I''ve got 2.0.7 running on a machine with 1 physical interface and two bridges, like so -- bridge name bridge id STP enabled interfaces xen-br0 8000.0040f4ce392f no eth1 vif5.0 vif9.0 xenbr1 8000.feffffffffff no

Hi all, I''m searching for a tutorial how to setup multiple network cards with xen network bridge setup in debian lenny. My problem is, bridges seams only to work if i put an ip adress in dom0 to them. Thanks, Alex _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Mrs and Mr My operative system is "Windows Vista" and can't update or install pakages of CRAN, the message for all pakages is for example: Erro en zip.unpack(pkg, tmpDir) : no fue posible abrir el archivo 'C:/Program Files/R/R-2.4.1pat/library/file8f653c7/MASS/chtml/MASS.chm' Help me thank you! Post data: Sorry my bad English Roberto Mario Domínguez Olivero Universidad

Hi, Sorry of this is the wrong list, trying to find some help. I am trying to set up 2 KVM hosts using Debian 9 (connecting to a 3 node Centos 7.4 gluster cluster) To get the bandwidth I have bonded 2 NICS each end. However while the network works fine for the Debian VM host the VM guests cannot connect/get an IP using DHCP connecting to br0. (Same setup on the Centos end works fine however)

Hi There. I am in the process of "upgrading" my Xen 2.0.7 server with a Xen 3.0.2, though I am doing so on a different machine. My firewall will be running as a DomU, asit also does on the existing server. The new server is Ubuntu 6.06 and the existing server is Debian Sarge. On the existing server, I have the WAN interface hidden from Dom0 with the two other physical interfaces

I am having issues with guest OSes running on SLES10 (Sun 4200) hosts. Periodically, the guest OS system drops off the network. From the general network it is not pingable, consequently, ssh fails. If however, I log into the SLES10 server that is hosting the guest OS and ssh to the guest OS, then it becomes immediately pingable and accessible to the rest of the network. Almost like the

I am not quite sure if this issue relates to iptables, routing or Xen virtual machines. Too many variables for my simple mind, so I'm asking some advice :) This is my network setup: Internet --- eth2 + CentOS dom0 / firewall / router + eth1 (xenbr1) --- LAN with private IPs --- separate file server and workstations + eth0 (xenbr0)

Hey All I''m Using Xen 3.0.3-105 on CentOS 5.5. It Has to Nics: eth0 - Internet eth1 - Internal Lan ( where Dhcp , DNs , Cobbler - Kick Start Server Resides ) I''ve Set xend-config.xsp to create xenbr1 on eth1 and it looks well So Guest May Get Access TO ALl Resources via the Bridge. brctl show bridge name bridge id STP enabled interfaces xenbr1

Hi Folks: I have a strange problem with multiple (2) NICs on a CentOS 5.5 dom0 setup running xen 3.4.3 and have been struggling to fix it for some time. I could not find anything by googling or searching through this list but that is probably because I couldn''t figure out the correct search terms. After I configure my bridges the command "system network restart" fails for eth1