similar to: domU NAT network cannot connect

Hi, My base system is Gentoo x64, and I compiled my kernel with Xen paravirtualization support. The kernel can boot without any problem in native mode. But when boot in Xen mode, I cannot start the xenstored service. This is my grub config file: title Gentoo x64 kernel-3.2.11-gentoo root (hd0,2) kernel /boot/kernel-3.2.11-gentoo root=UUID=38213e99-588e-4a7d-a215-8835f7afb1c4\

Hi, I have successfully start my Win7 x86 domU on my x64 Xen dom0 system. Now I want to give my Win7 full access to my Nvidia card. lspci 01:00.0 VGA compatible controller: NVIDIA Corporation G86 [Quadro NVS 140M] (rev a1) and I added these to my /etc/modprobe.d/xen-pciback.conf options xen-pciback hide=(0000:01:00.0) then I ran modprobe xen-pciback nothing happens on the screen, and my

Hi There, I''ve installed xen 3 and xen-tools on my Debian etch server and all seems well, until I try to start a guest domain. debian:/home/xen# xm create /etc/xen/D4G3.cfg Using config file "/etc/xen/D4G3.cfg". Error: Device 2049 (vbd) could not be connected. Backend device not found. I get the error: "Error: Device 2049 (vbd) could not be connected. Backend device

I''ve looked everywhere for the error message I''ve posted in the title, doesn''t seem like anyone else has it (lots of missing hotplugs scripts). We''re using network-nat. ifconfig -a outputs this: eth0 Link encap:Ethernet HWaddr 00:19:99:a8:f4:5c inet addr:X.X.X.X Bcast:X.X.X.X Mask:255.255.255.255 inet6 addr: X::X:X:X:X/64 Scope:Link

Hi I got a FC4 system running as Host.  Within this I loaded Suse 10 as a guest OS, the config file is as below: kernel = "/boot/vmlinuz-2.6.11.12-xenU" memory = 100 name = "suseguest" nics = 1 vif= [''mac=aa:00:10:00:00:10, bridge=xen-br0''] ip = "192.168.2.2" disk = [''file:/dev/hdc3,hdc3,w''] root = "/dev/hdc3 rw" extra =

Hi- I am trying to pass an LSI SAS2008-based HBA (IBM M1015) through to an HVM Solaris VM, using Xen 4.2 unstable and the qemu-traditional device model. On boot I see the following error: MPT BIOS Fault 09h encountered at adapter PCI(00h,05h,00h) A list search yielded (http://comments.gmane.org/gmane.comp.emulators.xen.devel/128172), however there was no solution for an HVM VM. I''ve

Package: xen-hypervisor-4.1-amd64 Version: 4.1.4-2 Hi, Hvm domU does not starts up afer dom0 reboot. Bridge br0 is set up manually. Dom0: Debian Wheezy 3.2.0-4-amd64 #1 SMP Debian 3.2.35-2 x86_64 GNU/Linux DomU: Debian Squeeze 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux config: ===<======== kernel = '/usr/lib/xen-4.1/boot/hvmloader' builder = 'hvm'

If i will use nat on a xen vm what should i set in the config file?

I have followed the nat advice from this guide: http://wiki.kartbuilding.net/index.php/Xen_Networking#Routed_Networking_with_NAT_2 I have googled internet for weeks and read almost every thread in this forum without getting a working NAT on my system. My main question is how exactly will the iptable rules with MASQUERADE or POSTROUTING look like if you want access to the internet from Dom U ,

Hi, I want to enable vga pass through, so to let my Win7 system use my Nvidia card directly. I searched for a long time, and many posts have mentioned something like this: echo 11f8 8032 >> /sys/bus/pci/drivers/pci-stub/new_id I understand to let the PCI device pass through, I need to unbind it from dom0 and bind it to domU. But what is this new_id form? And how do I know the id value to

Hi, I''ve set up identical (what I think) machines using SLES 10 x86_64, but a new one of those is saying frequently in /var/log/messages: kernel: bond0: received packet with own address as source address A short summary of ifconfig looks like this: bond0 Link encap:Ethernet HWaddr 00:14:4F:2A:12:9C inet addr:132.199.176.78 Bcast:132.199.255.255 Mask:255.255.0.0 eth0

Hello, There is a xen setup in which "brctl show" gives the following output. bridge name bridge id STP enabled interfaces eth1 8000.003048c9d4df no peth1 vif1.0 vif2.0

I installed 64-bit xen 3.1.0 (from xensource.com tarballs) on three new machines today, using a configuration setup that I''ve used successfully many times before. However, I encountered a new problem. These are Dell Poweredge 1950 servers, by the way. >From lspci 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) 08:00.0 Ethernet

I have a system with several reserved ranges low in the e820 map which cause problems when starting PV domains with PCI devices. The machine memory map looks like: (XEN) 0000000000000000 - 0000000000060000 (usable) (XEN) 0000000000060000 - 0000000000068000 (reserved) (XEN) 0000000000068000 - 000000000009ac00 (usable) (XEN) 000000000009ac00 - 00000000000a0000 (reserved) (XEN) 00000000000e0000

Folks -- One more time with the PAE request, this time I''ve brought up the Linux kernel w/ a very recent version of Xen. (Just yesterday I pulled and updated my hg tree.) I still can''t set breakpoints within the guest domain: # gdb vmlinux GNU gdb 6.4-debian <...> (gdb) target remote roti.lab.netapp.com:9999 Remote debugging using roti.lab.netapp.com:9999 [New

Hello everybody, I''m new to Xen so forgive me if this is already well known issue. I''m using Ubuntu server 7.04 (feisty) with Xen 3.0.3 Everything works perfectly, apart from networking in NAT mode. With bridging it works, with NAT it works, well, quite strange. Namely, pings go through and name resolution works. But when I try to use anything substantial, then

I installed xen on top of Cent OS 5.3 64bit OS with gitco rpm sources. Everything works fine except that I can''t run 64bit pv guest with virsh command. With xm commands I can load the same guest. 32bit pv guest, 32 bit and 64bit hvm works fine with both virsh and xm command. Has anyon have any idea? any help will be largely appreciated. **This is dumpxml for 64bit configuration* **

Hi, I have two physical machines connected through a switch in a 192.168.1.* subnet. Dom0''s are assigned static ip addresses 192.168.1.100, 192.168.1.101 respectively. Dom0''s can ping each other. Each physical machine has a domu guest and static address assigned to domu''s are 192.168.1.200, 192.168.1.201 respectively. However domu''s can neither ping each other

I''ve searched all night long on google, discussions, threads, and the xen wiki... but I can''t find how to do this: vif = [''type=ioemu,mac=XX:XX:XX:XX:XX:XX,model=ne2k_pci''] where should I put this? I have sxce94, dom0 works nicely, and domUs too, but I''d like to select ne2k for an hvm openbsd dom0 that I''ve created because I''ve read