similar to: Yum provider using version-release as version?

Hi all, I've been trying to build NUT (latest release source) on a pretty "standard" CentOS (RHEL style) linux box, to monitor an APC Symmetra UPS Unit which powers our server room and broadcasts information via SNMP to appropriate clients. I am having some trouble even encouraging NUT to build with snmp support, which doesn't seem to happen by default. I am curious if anyone

nut-2.6.5 Scientific Linux 6.3 APC AP9630 management card My basic question is, does nut's SNMPv3 implementation work? I have this in /etc/ups/ups.conf ...... [tfapc01] driver = snmp-ups port = tfapc01.testfest.ixorg.org mibs = apcc snmp_version = v3 secLevel = authPriv secName = tfsnmpprof1 authPassword = ralow6moHet7zoboP8 privPassword = tuseL8Pakaz9degim7 authProtocol=MD5

Hi all - I'm new to both UPS setup and SNMP on linux - so I'd appreciate any help I can get....I'm stuck! I'm running fedora core 5, and have installed net-snmp and nut. I'm trying to get my network connected UPS to this linux machine. My /etc/ups/ups.conf looks like this: [upsnetwork] driver = snmp-ups port = 172.31.254.7 community = public desc="Network

OpenBSD 5.6 nut-2.7.2 (bin package) Liebert IntelliSlot Unity Card IS-UNITY-DP ups.conf: ...... ? mibs = ietf ? snmp_version = v1 ...... The problem is that the card responds to other snmp (v1,2c,3) requests normally but not to the 1.3.6.1.2.1.33.1.1.1.0 (UPS-MIB.upsIdentManufacturer). # snmp-ups -a laes2ups -DDDDDDD Network UPS Tools - Generic SNMP UPS driver 0.72 (2.7.2) ?? 0.000000???? debug

G'day I'm currently using NUT on Debian squeeze box in the same subnet with an IBM 3000 HV (branded Eaton 5125 with Web/SNMP card), now I wanted to get our storage appliance running NexentaStor 3.1 set up to be using NUT too. Nexenta- Stor is an OpenSolaris / illumos-based appliance OS currently using NUT packages from ubuntu hardy. My question here is whether I'm running into a -

Just started using NUT and having a problem. I'm not sure if it is even NUT that is causing the issue. I'm running the latest FreeNAS 9.3 release. Network UPS Tools upsmon 2.7.2. The UPS is a Tripplite SU6000RT4UHVPM with the SNMPwebcard installed. I'm trying to use the SNMPwebcard, not USB or Serial. I've updated the SNMPwebcard to the latest firmware version (see below). In

Hi I set up my ups with driver snmp-ups, and it get recognized as a AEC T2003. In the nut-cgi upstats page input/output/load are displayed corectly, but the Status field is marked as "Not supported". Is "Status" important to initiate shutdown in case of low battery ? Will my server shut down correctly ? thanks Massimo I include "upsc snmp@localhost" output:

root at Monitor:/etc/nut# upsc ups1 Init SSL without certificate database battery.runtime: 133200.00 battery.runtime.elapsed: 0.00 device.mfr: CYBERPOWER device.model: PR2200LCDRT2U device.serial: 1 device.type: ups driver.name: snmp-ups driver.parameter.pollfreq: 1 driver.parameter.pollinterval: 2 driver.parameter.port: 192.168.1.7 driver.parameter.snmp_version: v1 driver.version:

New NUT install dealing with three APC Smart-UPS 5000s, two of which have AP9617 and the third has a AP9619 card. The SNMPv3 configurations on all three are exactly the same. This is confirmed by snmpget calls that work just fine: snmpget -Cf -v3 -u [...] -l authPriv -A '[...]' -X '[...]' -a MD5 -x DES [upsname] .1.3.6.1.4.1.318.1.1.1.1.1.1.0 snmp-ups can query all three

[please use Reply-All to keep the list CC'd, thanks] On Mar 30, 2015, at 11:04 PM, Jason Gould <jgould at cddiagnostics.com> wrote: > Thanks. I should also mention the freenas server is setup with an lacp lagg. > > I will also mention that even when not setting pollfreq (leave as default) the issue still occurs. > It looks like the default for pollfreq is actually 30 on

I missed that snmp-ups set pollfreq to 30 by default. I'd hope that it would set deadtime to an appropriate value as well than, no? Is there a way to query what the settings are or what the defaults are? I'm going to set POLLFREQ=30 and DEADTIME = 90 and see if that has any effect. I'll check for the logs. And if that doesn't get my anywhere I'll look at trying to simulate

Hello all, Thank you in advance for a great FOSS project. Also, thank you for reading my question. I have a CyberPower OR1500LCDRTXL2U with an RMCARD205. There are a handful of devices plugged into the UPS. I received a message today saying to send upsc output to NUT developers after this message: "No matching MIB found for sysOID '.1.3.6.1.4.1.3808.1.1.1'" root at

Hello, I have a Legrand Keor T [1] monitored via snmp, everything seems to work fine, upsc output looks good [2] except that I can?t get the low battery state "OB LB? as usual (it works fine with others UPS like APC or Dell). Here is the configuration : [lgups] driver = snmp-ups port = 192.168.99.60 community = public snmp_version = v2c mibs = auto

Further information on this issue, attn. Arnaud Quette: Here is the result of a test I made a few days ago. I've pulled the input plug on the UPS and watched the 3 critical OIDs through a MIB browser: - 1.3.6.1.4.1.232.165.3.4.5.0 goes from 3 (OL) to 5 (OB) (as expected => good) - 1.3.6.1.4.1.232.165.3.7.3.0 stays at 1 (OB) (=> seems meaningless) - 1.3.6.1.4.1.232.165.3.7.4.0

Hello Pros and users of Puppet. I have two problems with the following modul setup: My first problem that i tried every combination of require,notify,subscribe for the mail sending exec but it runs every single time when i run the module no matter if the files changed or not. Second problem that puppet reports that snmpd was refreshed by two resource and restarted but actually it doesnt happen.

CentOS Errata and Bugfix Advisory 2009:1437 Upstream details at : https://rhn.redhat.com/errata/RHBA-2009-1437.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: c94ac61b60643b113ee36491fb182702 net-snmp-5.3.2.2-7.el5_4.2.x86_64.rpm a52966f9d3634944e18cbaea3eea25b5 net-snmp-devel-5.3.2.2-7.el5_4.2.i386.rpm

Additional question: I noticed on the HP Website that the latest version of "CPQPOWER.MIB" (1.76, dated Sept. 19, 2013) was more recent than the related file (./drivers/compaq-mib.c) in the NUT driver. Is the MIB structure as implemented on the management card perhaps no longer in line with the NUT driver ? The latest MIB file can be downloaded from the following URL:

Greetings I''m searching for an elegant way to contribute lines to an SNMP configuration file from resources scattered throughout a given system''s catalog, such that from anywhere, the SNMP configuration file can be arbitrarily extended like this: $snmp::lines += "proxy -m ${mib_file} -v 2c -c ${snmp_community} localhost:1161 .1.3.6.1.4.1.42.2.145" Forgive me if

Hi all, I would like to check two UPS in two different buildings with an ubuntu server. I use SNMP on both UPS. The cgi-page displayed all information as expected, but if I pull the fuse for one UPS in building A, none action occur. I expected that I get a mail "UPS A on Batt" and that after 5 minutes the shotdownscript starts. But no action. I saw that there is no upsmon process

Hello folks, I''m sitting here converting my static, simple classes/snmp.pp into a full module, and I''ve run into a bit of a brick wall. net-snmp is one of those wonderful programs that will only read two configuration files (it reads a few more, but only 2 are in /etc) - /etc/snmpd.conf and /etc/snmpd.local.conf. This means that my SNMP module is somehow going to have to