similar to: sip registration

This seems basic but something is missing..... I dial from my cell phone to my DID and enter the context in extensions.conf I am hoping to cascade through the plan and successfully automatically dial the 1444 number listed. But it fails. And, I dpon't know why? Should I removed the Hangup application? Syntax issue somewhere? I have a good SIP registration with the vendor, voipvoip.

I am trying to make sure my DID and SIP account details are working properly and engaging the extensions.conf and dial plan. I have a successful SIP session registered: Connected to Asterisk 11.3.0 currently running on Asterisk (pid = 922) Asterisk*CLI> sip show registry Host dnsmgr Username Refresh State Reg.Time sip3.voipvoip.com:5060

Hi i have an issue getting agentLogin working /etc/asterisk/queues.conf member => Agent/1001 member => Agent/1002 extension.conf exten => 110,1,Wait,1 exten => 110,2,AgentLogin() now, i call 110 by a firefly client, trying to login in as 1001 agent: Aug 12 16:31:36 DEBUG[1103408048]: chan_sip.c:4423 build_route: build_route: Contact hop: <sip:sip3@192.168.1.151:5060> --

Basic Dial Plan Why is this plan not engaging the line exten => 105,n,Dial(SIP/voipvoip.com/17035013333) and dialing the 703 number? The logs and debug dont show any problems.... [incoming] exten => 4444444444,1,Answer() exten => 4444444444,n,Wait(1) exten => 4444444444,n,Playback(beep) exten => 4444444444,n,Goto(105,105,1) ; ; [105] exten => 105,1,Wait(2) exten =>

Without using Dundi or SER, any thoughts on the following anyone? Has something similar been implemented anywhere so as to me not having to horribly butcher code... 4 servers SIP1-4 User1 -- -- SIP1 -- \ / \ User2 ------ Go to register ------- SIP2 ----- Whereis? --> DB / \ / User3 --

Hello, I want that, when call is answered , callee and calling would hear different prompts and after promts the calls would be bridged. I've tried this situation: exten => s,1,Set(LIMIT_CONNECT_FILE=hello-world) exten => s,2,Dial(SIP/trunk-out/37052390920|60|rL(10000000000000)A(conf-enteringno)) But these prompts play not in the same time: just after conf-enteringno prompt

Hi All, Is it possible to make a IAX2 connection between asterisk 1.6.1.0 , and asterisk 1.2.14 ? i tried to use a IAX2 connection between version 1.2.14 and 1.6.1.0 but it gave an error - 1.2.14 End - Error Msg WARNING[8313]: chan_iax2.c:7103 socket_read: Call rejected by 147.120.203.71: No authority found 1.2 END , IAX.conf [trunk14] type=friend host=147.120.203.71 secret=test123

my sip phone registered on 1.6, when i dial 4567 from 1.6 version, it wont go to 1.6 voice mail. it says == Using SIP RTP CoS mark 5 -- Executing [4567 at sip:1] Dial("SIP/312-09f9a720", "IAX2/trunk10 at 147.120.203.98/4567,10,t") in new stack -- Called trunk10 at 147.120.203.98/4567 [Jun 1 11:01:18] WARNING[8178]: chan_iax2.c:8991 socket_process: Call rejected by

Hey, You know, the Digium guys said both are good. They said the the DNS method is better because you dont have the extra point of failure (SER) but said the SER method is better in that it gives you more exact control in the handling of the calls and registration. They did acknowledge there would be a possible downtime only for incoming calls to users with dynamic IPs if the

Egad, not again with Broadvoice! Anyhow, I recently installed AAH and configured my TDM11B and got that and some SIP phones working. I still have some issues to work out, etc, but my current problem is Broadvoice. I have checked out all of the online resources, including the recent list exchange about the recent changes made by Broadvoice. However, the one thing I have found to be consitent in

Outbound calls on my Telus PRI aren't taking the Name portion of the callerID. I've looked at the logs, and it is being set (see below), but the PRI debug output doesn't show the name being sent anywhere. As a result, received calls always display from Unknown (or just the number). Is there some config that I've missed somewhere? I'm running NI-1 (Telus says NI-2 doesn't

Dear all, I am currently trying to configure a PBX make use of a multiple of outgoing lines, currently my extensions.conf looks something like below >> ; extensions.conf ; 20th October 2008 [globals] sip1=201 sip2=202 sip3=203 sip4=204 [general] autofallthrough=yes [default] [incoming_calls] exten => _89859715,1,Dial(SIP/201) exten =>

Hi all, Seriously, I've tried to read everything I could find (& search for) on voip-info.org and other sites about this problem, but have been unsuccesful. Equipment: xten lite X100P Whitebox linux running Asterisk / AMP D-Link DI-804HV (VPN router) I have installed another DI-804HV at a second location and created a tunnel. For the computers behind that unit, everything works fine

I am trying to collect enough information about an problem a client is having with its asterisk 11.17.0 x86_64. This issue was observed before in 1.8.20, and we upgraded to 11.15.0 and then to 11.17.0 with no solution. Background: this client is a telemarketing call-center that generates outgoing calls with close to a hundred agents operating simultaneously in peak hours. The system uses

Grrr. I'm using outlook web access and there's no way to do inline replies. Anyway... Gabriel. Using SER does not create a single point of failure. You install three SER boxes. Single point of failure gone. It does not take several seconds. If your phones are configured for SRV, and 2/3 of your SER boxes down, it takes about 2s. That's not bad for a 2/3 system failure. You can

---------------------------------------------------------------------------- ---- FULL RSYNC LOG ---------------------------------------------------------------------------- ---- /usr/bin/rsync -av --force --delete-excluded --exclude-from=/usr/local/etc/snapback/snapback.exclude -e ssh --delete peru.cbm.mercyships.org:/ /home/backup/peru/hourly.0/ <bunch of lines deleted> wrote 873039

Hi We've recently set up and are using with success 1.0.7 using a Junghanns quadbri card to BRI ISDN, and Firefly with IAX2 protocol as softphones Works very well, however we're getting cases where sometimes the call just drops. >From setting more verbose modes we get a log which is shown below. The problem seems to be the maxretries message which comes from chan_iax2. We are using

I have two external interfaces in a Multi-ISP config. I allow access to port 81 for a webcam, but I only want that to work for one of the interfaces, and I want to limit the connections to it by maximum time for one user, or failing that, maximum connections, as people just leave it running on their desk all day (it''s a Caribbean beach so people sit and dream). ow do I do that as

> -----Original Message----- > From: Alexander Lopez [mailto:Alex.Lopez@OpSys.com] > Sent: Thursday, March 16, 2006 8:46 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] Feedback from VON expo! Info on > *HAandPolycomphone!! > > > > > > "Q: What are the plans for HA? > > That's BS. Last time I

Dear all, I'd like to know if there is a way for multiple asterisk servers to share a common SIP and/or IAX registry. The setup I imagine would be something like : - several asterisk servers called sip1.isp.com, sip2.isp.com, ... - a DNS alias sip.isp.com pointing to all the addresses (thus providing a round robin resolution on each server) - each SIP client would register with sip.isp.com