similar to: Hang on boot with 4.9-STABLE

Hi. I've recently borrowed a SuperMicro 6013P-8 from a vendor for the purposes of testing it to see if FreeBSD and these machines will make a good replacements for our current flock of 11 Netra T1s running solaris. Things are going very well with the tests, with the glaring exception of the following crash: While doing some significant disk operations: du, deleting a different part of the

I am using the "UseLogin yes" configuration parameter to call the /usr/bin/login program on SGI Irix, (we are using Irix version 6.5.13). I do this because the SGI login program is AFS awhere and checks out a token for you and I do not want to compile the Kerberos version of sshd, (it is to messy for me to support). Everything seems to work fine accept the wtmp(x) and utmp(x) files do

Hello, I'm having problems getting my samba setup to work at a little LAN i partially maintain. I've been reading quite a lot about what I could think of being related to my problems/setup, and I've also googled my ass off :( So here I am, resorting to you guys in hope of help =] Sorry to say, but I don't have much experience, and therefore I'm a bit lost at the moment. Not

rsync version 3.1.2 protocol version 31 I've run into an issue using rsync on my QNAP NAS. I've installed Entware-ng on the NAS so that I can install better versions of programs, rsync being one of them. But, I've run into an issue wqith using the --delete option, as it has problems using wildcards. Initially a backup script looked like: #!/bin/sh for d in

Hello all, I have problems with enabling support for SMBus on STABLE. My motherboard is ICH3 (82801CA). As suggested in LINT I added 3 lines to my kernel config: device smbus device ichsmb device smb But after compiling, installing and rebooting /dev/smb[01] are not available and no changes in kernel startup messages either. So I

Well, 4 days after previous upgrade i cvs'ed RELENG_4 from local cvs tree (updated hourly), made buildworld buildkernel installkernel, rebooted into single user, made installworld and mergemaster. Mergemaster updated newsyslog.conf, syslogd.conf, ok, rebooted... Wow... All scripts from /usr/local/etc/rc.d refused to load. And the system is in "Amnesiac" mode Attempt to run

Sorry if this is a known problem... I've been tracking RELENG_4 on my Toshiba laptop for a while now; a couple of months ago (not sure when) my sound stopped working. More specifically, when it gets to the pcm probe, the boot hangs. I dual-boot with WinXP and figured that somehow XP had hosed the hardware, so I wrote it off. Today, I made world with RELENG_4_8, and voila, my sound's

Hello, I have the following hardware configuration. Tyan 2466N motherboard, 1.03 BIOS, 2 Athlon-MP 1800+ CPUs, 512MB registered ECC DRAM, Onboard 3Com NIC (xl type) Radeon 8500 AGP video card Adaptec 3210S SCSI RAID controller Comtrol RocketPort 8 port PCI serial card I have started to experience some odd system lockups in the past couple months, and it seems to be getting worse. I particular,

I'm trying to get stable booted on a little ITX board off of a CF card, but it hangs as it's trying to run init. Here's what the boot looks like. SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=01 base=000000000009fc00 len=0000000000000400 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 SMAP type=01

Hi, I'm getting the message in the subject when I run systat -vm on a lightly loaded server. Top shows interesting CPU usage %: CPU states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 0.0% idle Some Googling tells me that a fix for this went in around 1998 in sys/i386/isa/clock.c, see http://www.geocrawler.com/archives/3/159/1998/7/0/777198/ (fix verified to be present in

After updating my kernel from a 4.7-stable to 4.8-stable update, my SB PCI128 is no longer recognized by the pcm driver. Here is my dmesg: FreeBSD 4.8-STABLE #0: Thu Jul 17 14:13:52 CDT 2003 root@hautlos.stout.osu-res.okstate.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(tm) Processor (800.03-MHz 686-class CPU) Origin =

I purchased the 256 MB A-DATA flash drive (USB 2.0 SpeedDrive), but the system can't query its size. Here is corresponding parts of system messages (boot -v): >>>>>>>>>>> Aug 5 12:53:57 goshik /kernel: Copyright (c) 1992-2003 The FreeBSD Project. Aug 5 12:53:57 goshik /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Aug 5

Hi, After kernel panic I couldn't get gdb work properly. msi$ uname -sr FreeBSD 4.7-RELEASE msi$ gdb -k /usr/src/sys/compile/MSINW/kernel.debug vmcore.0 GNU gdb 4.18 (FreeBSD) Copyright 1998 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show

Hi, I am running a Xeon with hyperthreading support. Until last week's HTT modifications, according to ps(1) and top(1) both logicals CPUs were in use. (Processes in CPU0 and CPU1 state; "C" column showing "0" or "1".) This has changed with a recent -STABLE kernel which includes last week's changes to HTT (removing "options HTT"). I am only seeing

Dear All, I had my earlier post sub virtual machine does not start up.. by the way i did manage to solve my problem . i actually dont know what could be the real cause but I did reconnect my cd rom drive and voila did come up let me explain i have a sun blade server which conects the keyboard , mouse and cd rom with a front panel USB cable . so the cd rom was removed and hence my virtual

--delete only works when you sync a dir not individual files. So... rsync -vai --delete --include='g*' --include='G*' --exclude='*' /share/Public/videos/ /share/Backup-HDD-03 On 05/03/2018 12:08 AM, Mike Brown via rsync wrote: > rsync version 3.1.2 protocol version 31 > > I've run into an issue using rsync on my QNAP NAS. I've installed Entware-ng

After some dialog with Terry Lambert on -hackers, I've been advised to post this here. I have a 4.7-RELEASE-p10 box that is suffering regular kernel panics. The machine is a Dell 2650 running primarily as a file/print server to a number of computer labs of about 400 machines (although it also functions as a rembo image server and squid proxy). It mainly stores applications, which

I'm having an issue where a certain set of types and insert/extractvalue are producing the incorrect values. It appears as though extractvalue getting my sub-structure is not getting the correct data. I have these types: %outer = type { i32, %inner, i1 } %inner = type { double, i32 } The trouble is that when I have a value of type %outer then proceed to extract the components of the

I am running into a problem using 'mix' for multiple imputation (over continuous and categorical variables). For the way I will be using this I would like to create an imputation model on some training data set and then use this model to impute missing values for a different set of individuals (i.e. I need to have a model in place before I receive their information). I expected that all

In ancient times, circa 1980, S data directories were called swork and sdata not .Data, and "New-S" as described in the already medieval "Blue Book" discusses a function DBCONVERT that converted swork data into .Data data. It is embarrassing to admit it, but I still have data archives from a BTL machine called alice in the swork format and would like to convert a dataset to